| POLYMERS AND POLYMER MATRIX COMPOSITES |
|
|
|
|
|
| Research Progress on the Interface Properties of Carbon Fiber Reinforced Polymer Matrix Composites |
| LI Meiqi1, LI Xiaofei1, WANG Ruitao2, NIE Linfeng1, ZHANG Run1, ZHANG Donghai1,*, CHEN Yunfa1,3,*
|
1 State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
2 Zhejiang Institute of Tianjin University, Ningbo 315201, Zhejiang, China
3 Center of Materials Science and Optoelectronics Engineering, University of the Chinese Academy of Sciences, Beijing 100049, China |
|
|
|
Abstract Compared with traditional metal materials, carbon fiber reinforced polymer matrix composites(CFRPMC) have obvious advantages in specific strength and density, and have been widely used in machinery manufacturing, transportation, aerospace and other fields. In addition to carbon fiber and polymer matrix, the interfacial properties between the two also have an important impact on the physical and chemical properties of CFRPMC, and have become a research hotspot in the field of composite material technology.
The physical and chemical properties of CFRPMC are not only closely related to the properties of carbon fiber and polymer matrix, but also affected by the interface properties between them. CFRPMC is gaining more and more interest due to the rapid development of the composite material industry, mainly focusing on the study of its interface properties. In addition to carbon fiber and the polymer matrix, the interfacial properties of them also have an important impact on the physical and chemical properties of CFRPMC, and have become a research hotspot in the field of composite materials technology.
The CFRPMC interface is the transition region between the carbon fiber and the polymer matrix, which is affected by many factors such as the surface characteristics of the carbon fiber and the polarity of the polymer molecular chain. At present, it can’t be directly quantitatively and qualitatively analyzed. However, with the development of material detection technology, related technologies such as SEM, TEM, AFM, various spectroscopy, macroscopic surface analysis and mechanical property testing, have been widely used in the interface composition, structural morphology and mechanical properties of composites. In this paper, the research progress of the interface of CFRPMC is reviewed, and the interface theory, interface analysis and characterization methods and the influencing factors of interface properties of carbon fiber and polymer matrix are discussed in detail. Through comparison and analysis, the latest progress of CFRPMC interface research is summarized, and the future development trends are outlooked.
|
|
Published: 25 October 2023
Online: 2023-10-19
|
|
|
| Fund:‘Application and Industrialization of High-Performance Green Waterborne Industrial Coatings’ in the Key Project of ‘Technology Helps Economy 2020’ (2020ZLHJ02),the Open Research Fund of State Key Laboratory of Multiphase Complex Systems,Institute of Process Engineering, Chinese Academy of Sciences (MPCS-2021-D-11). |
|
|
1 Li S, Sun T, Liu C, et al. Royal Society Open Science, 2018, 5(3), 111272.
2 Zhang D K, Wang G H, Fang D K, et al. New Chemical Materials, 2022, 50(1), 1(in Chinese).
张登科, 王光辉, 方登科, 等. 化工新型材料, 2022, 50(1), 1.
3 Clausi M, Toto E, Botti S, et al. Composites Science and Technology, 2019, 183, 107823.
4 Friedrich H E. Advanced Engineering Materials, 2003, 5(3), 105.
5 Xiang L, Xiao Y Z. In: Proceedings of the 2019 International Conference on Robotics, Intelligent Control and Artificial Intelligence-RICAI 2019. Shanghai, 2019, pp. 310.
6 Wu G S, Ma L, Liu L, et al. Journal of Adhesion Science and Technology, 2015, 29(21), 2295.
7 Cho B G, Hwang S H, Park M, et al. Composites Part B-Engineering, 2019, 160, 436.
8 Liu L, Jia C, He J, et al. Composites Science and Technology, 2015, 121, 56.
9 Duchoslav J, Unterweger C, Steinberger R, et al. Polymer Degradation and Stability, 2016, 125, 33.
10 Drzal L, Rich M, Lloyd P. Journal of Adhesion, 1983, 16(1), 1.
11 Li X C. The effects of reactive carbon nanotubes on interface bonding and mechanical properties of fiber reinforced composites. Master’s Thesis, Beijing University of Chemical Technology, China, 2011(in Chinese).
李晓超. 活性碳纳米管对纤维复合材料界面及力学性能影响. 硕士学位论文, 北京化工大学, 2011.
12 E J, Jin Y, Deng Y, et al. Advanced Materials Interfaces, 2018, 5(1), 1701052.
13 Xu P, Yu Y, Guo Z, et al. Composites Science and Technology, 2019, 171, 252.
14 Lee Y S, Lee B K. Carbon, 2002, 40(13), 2461.
15 Zisman W A. Advances in Chemistry, 1964, 43(1), 1.
16 Hughes J. D. H. Composites Science and Technology, 1991, 41(1), 13
17 Zabihi O, Ahmadi M, Li Q, et al. Composites Science and Technology, 2017, 148, 49.
18 Johnston J P, Koo B, Subramanian N, et al. Composites Part B-Engineering, 2017, 111, 27.
19 Norio I, Eleni P, Yhihiro S, et al. Composites Part A, 1998, 29, 965.
20 Demir B, Henderson L C, Walsh T R. ACS Applied Materials & Interfaces, 2017, 9(13), 11846.
21 Lin J S. Polymers & Polymer Composites, 2000, 8(2), 107.
22 Ma L, Wu G, Zhu Y, et al. Polymer Composites, 2018, 39, E2381.
23 He J M, Huang Y D. Journal of Applied Polymer Science, 2007, 106(4), 2231.
24 Liu G J. Modern Paint & Finishing, 2006(12), 13.(in Chinese).
刘国杰. 现代涂料与涂装, 2006(12), 13.
25 Zhou Y, Fan M, Chen L. Composites Part B-Engineering, 2016, 101, 31.
26 Deng S, Ma W, Zhou X, et al. Composite Interfaces, 2012, 19(8), 499.
27 Semoto T, Tsuji Y, Tanaka H, et al. Journal of Physical Chemistry C, 2013, 117(47), 24830.
28 Chen L, Hu Z, Wu Z, et al. Composites Part a-Applied Science and Manufacturing, 2017, 96, 1.
29 Smith I. Polymer, 1961, 2(1), 96.
30 Liu H, Li M, Lu Z Y, et al. Macromolecules, 2011, 44(21), 8650.
31 Deng C. Effects of electrophoretic ally deposited carbon nanotubes and graphene oxide coatings on interfacial properties of carbon fiber composite. Ph. D. Thesis, Northwestern Polythechnical University, China, 2016(in Chinese).
邓超. 纳米碳电泳沉积对碳纤维复合材料界面性能的影响. 博士学位论文, 西北工业大学, 2016.
32 He M. Research of establishing phthalocyanine-based interphase on the interfacial properties of carbon fiber composites. Ph. D. Thesis, Beijing University of Chemical Technology, China, 2020(in Chinese).
何梅. 碳纤维表面酞菁结构的界面相构建及其复合材料界面性能研究. 博士学位论文, 北京化工大学, 2020.
33 Jia X, Li G, Liu B, et al. Composites Part a-Applied Science and Manufacturing, 2013, 48, 101.
34 Lopez-manchado M, Valentini L, Biagiotti J, et al. Carbon, 2005, 43(7), 1499.
35 Schadler L S, Giannaris S C, Ajayan P M. Applied Physics Letters, 1998, 73(26), 3842.
36 Carroll B J. Journal of Colloid and Interface Science, 1976, 57(3), 488.
37 Yamaki J I, Katayama Y. Journal of Applied Polymer Science, 1975, 19(10), 2897.
38 Kang S K, Lee D B, Choi N S. Composites Science and Technology, 2009, 69(2), 245.
39 Shui X Y, Liu M, Zhu Y F, Acta Materiae Compositae Sinica, 2016, 33(2), 273(in Chinese).
水兴瑶, 刘猛, 朱曜峰, 等. 复合材料学报, 2016, 33(2), 273.
40 Bismarcka A, Kumur M E, Sprnger J. Journal of Colloid and Interface Science, 1999, 210(1), 60.
41 Pucci M F, Seghini M C, Liotier P J, et al. Composites Part B: Engineering, 2017, 109, 72.
42 Peng Q, Li Y, He X, et al. Composites Science and Technology, 2013, 74, 37.
43 Chen J, Wang K, Zhao Y. Composites Science and Technology, 2018, 154, 175.
44 Fan W, Li J L, Zheng Y Y. Polymer Testing, 2015, 44, 177.
45 Zhang M, Zhu B, Wang Q F, et al. Fiber Composites, 2007(2), 21.(in Chinese).
张敏, 朱波, 王启芬, 等. 纤维复合材料, 2007(2), 21.
46 Jin L. Effect of surface modification on interfacial properties of carbon fiber/epoxy composites. Master’s Thesis, Changchun University of Technology, China, 2020(in Chinese).
金琳. 表面修饰对碳纤维/环氧树脂复合材料界面性能的影响. 硕士学位论文, 长春工业大学, 2020.
47 Zhang D H, Ye L, Chen Y F, et al. Composites Science and Technology, 2012, 72(3), 412.
48 Li Y, Peng Q, He X, et al. Journal of Materials Chemistry, 2012, 22(36), 18748.
49 Shi L, Song G, Li P, et al. Composites Science and Technology, 2021, 201, 108522.
50 Xu H, Zhang X, Liu D, et al. Composites Part B-Engineering, 2016, 93, 244.
51 Lindsay B, Abel M L, Watts J F. Carbon, 2007, 45(12), 2433.
52 Yao X, Gao X, Jiang J, et al. Composites Part B-Engineering, 2018, 132, 170.
53 Ma L, Wu G, Zhu Y, et al. Polymer Composites, 2018, 39, 2381.
54 Peng Q, He X, Li Y, et al. Journal of Materials Chemistry, 2012, 22(13), 5928.
55 Jin L, Jiang Y, Zhang M, et al. Scientific Reports, 2018, 8, 6268.
56 Pathak, Borah M, Gupta A, et al. Composites Science and Technology, 2016, 135, 28.
57 Ma L, Meng L, Wu G, et al. Composites Science and Technology, 2015, 117, 289.
58 Zheng X, You J C, Zhu Y T, et al. Acta Polymerica Sinica, 2022, 53(5), 539.
59 Wu Z J, Fang J H, Peng H Y, et al. Synthetic Lubricants, 2020, 47(2), 41(in Chinese).
吴兆杰, 方建华, 彭宏业, 等. 合成润滑材料, 2020, 47(2), 41.
60 Zheng X, You J C, Zhu Y T, et al. Acta Polymerica Sinica, 2022, 53(5), 539(in Chinese).
郑鑫, 由吉春, 朱雨田, 等. 高分子学报, 2022, 53(5), 539.
61 Yang J M, Zhang H M, Wang X, et al. Physics and Engineering, 2014, 24(4), 26.(in Chinese).
杨金梅, 张海明, 王旭, 等. 物理与工程, 2014, 24(4), 26.
62 Yang W C, Liu D F, Gao X, et al. China Port Science and Technology, 2022, 4(2), 30.(in Chinese).
杨文超, 刘殿方, 高欣, 等. 中国口岸科学技术, 2022, 4(2), 30.
63 Wang H W, Wang J H, Zhu J Y, et al. Composites Science and Engineering, 2003(3), 42.(in Chinese).
王恒武, 王继辉, 朱京杨, 等. 复合材料科学与工程, 2003(3), 42.
64 Zhou J, Li Y, Li N, et al. Composites Science and Technology, 2016, 133, 173.
65 Qi G, Zhang B, Du S, et al. Composite Structures, 2017, 167, 1.
66 Zhang Q, Wu J, Gao L, et al. Polymer, 2016, 90, 193.
67 Yao H, Sui X, Zhao Z, et al. Applied Surface Science, 2015, 347, 583.
68 Han S H, Oh H J, Lee H C, et al. Composites Part B: Engineering, 2013, 45(1), 172.
69 Tian Y, Zhang H, Zhang Z. Composites Part a-Applied Science and Manufacturing, 2017, 98, 1.
70 Graupner N, Roessler J, ZiegmannI G, et al. Composites Part a-Applied Science and Manufacturing, 2014, 63, 133
71 Penn L, Bowler E. Surface and Interface Analysis, 1981, 3(4), 161.
72 Stojcevski F, Hilditch T B, Gengenbach T R, et al. Composites Part a-Applied Science and Manufacturing, 2018, 114, 212.
73 Miller B, Muri P, Rebenffld L. Composites Science and Technology, 1987, 28(1), 17.
74 Kang S K, Lee D B, Choi N S. Composites Science and Technology, 2009, 69(2), 245.
75 Lee M W, Wang T Y, Tsai J L. Composites Part B-Engineering, 2016, 98, 308.
76 Nishikawa M, Okabe T, Hemmi K, et al. International Journal of Solids and Structures, 2008, 45(14-15), 4098.
77 Yao X, Jiang J, Xu C, et al. Fibers and Polymers, 2017, 18(7), 1323.
78 Yang P J, Yuan J M, He L P. Materials Reports, 2017, 31(7), 129(in Chinese).
杨平军, 袁剑民, 何莉萍. 材料导报, 2017, 31(7), 129.
79 Bennett S, Johnson D. Carbon, 1979, 17(1), 25.
80 Dilsiz N, Wightman J P. Carbon, 1999, 37(7), 1105.
81 Dilsiz N, Erinc N, Bayramli E, et al. Carbon, 1995, 33(6), 853.
82 Paiva M C, Bernardo C A, Nardin M. Carbon, 2000, 38(9), 1323.
83 Hou F H, Deng H B, Li C J, et al. Fiber Composites, 2008(3), 18(in Chinese).
侯锋辉, 邓红兵, 李崇俊, 等. 纤维复合材料, 2008(3), 18.
84 Tiwari S, Bijwe J. In: 2nd International Conference on Innovations in Automation and Mechatronics Engineering. Vallabh Vidyanagar, 2014, pp. 505.
85 Wang Z M, Yamashita N, Wang Z X, et al. Journal of Colloid and Interface Science, 2004, 276(1), 143.
86 Park S J, Kim B J. Materials Science & Engineering A, 2005, 408(1-2), 269.
87 Yang Y G, He F, Wang M Z, et al. Carbon, 1999(1), 15(in Chinese).
杨永岗, 贺福, 王茂章, 等. 炭素, 1999(1), 15.
88 Du H L, Qi J G, Pang H T, et al. Materials Protection, 2003(2), 16(in Chinese).
杜慧玲, 齐锦刚, 庞洪涛, 等. 材料保护, 2003(2), 16.
89 Lee Y S, Lee B K, Rho J S. Korean Journal of Chemical Engineering, 2003, 20(1), 151.
90 Yu J, Meng L, Fan D, et al. Composites Part B-Engineering, 2014, 60, 261.
91 Zhang G, Sun S, Yang D, et al. Carbon, 2008, 46(2), 196.
92 Zhang M. Study on the key factors of interfacial bonding strength of carbon fiber reinforced resin composites. Ph. D. Thesis, Shandong University, China, 2010(in Chinese).
张敏. 碳纤维增强树脂基复合材料界面结合强度关键影响因素研究. 博士学位论文, 山东大学, 2010.
93 Qian X, Wang X F, Ouyang Q, et al. Applied Surface Science, 2012, 259, 238.
94 Liu J, Tian Y, Chen Y, et al. Applied Surface Science, 2010, 256(21), 6199.
95 Gulyas J, Foldes E, Lazar A, et al. Composites Part a-Applied Science and Manufacturing, 2001, 32(3-4), 353.
96 Fukuna A, Ueda S. Composites Science and Technology, 2000, 60(2), 249.
97 Guo Y X, Liu J, Liang J Y. Journal of Materials Science & Technology, 2005, 21(3), 371.
98 Peng J, Zhang J, Jian X G, et al. Materials Reports, 1999(2), 48(in Chinese).
彭静, 张军, 蹇锡高, 等. 材料导报, 1999(2), 48.
99 Zhang S B, Liu F J, Wang H J, et al. In: 17th National Conference on Composite Materials. Beijing, 2012, pp. 1114(in Chinese).
张淑斌, 刘福杰, 王浩静, 等. 第17届全国复合材料学术会议. 北京, 2012, pp. 1114.
100 Lu C, Qiu S, Lu X, et al. Polymers, 2019, 11(5), 753.
101 Xie J, Xin D, Cao H, et al. Surface & Coatings Technology, 2011, 206(2-3), 191.
102 Montes-moran M A, Martinez-alonso A, Tascon J M D, et al. Compo-sites Part a-Applied Science and Manufacturing, 2001, 32(3-4), 361.
103 Han S H, Oh H J, Kim S S. Composites Part B-Engineering, 2014, 60, 98.
104 Kamar N T, Drzal L T, Lee A, et al. Polymer, 2017, 111, 36.
105 Xu J M, Li J. Polymer Materials Science & Engineering, 1990(1), 66(in Chinese).
许嘉敏, 李军. 高分子材料科学与工程, 1990(1), 66.
106 Gibson R F. Composite Structures, 2010, 92(12), 2793.
107 Zhang F H, Wang R G, He X D, et al. Journal of Materials Science, 2009, 44(13), 3574.
108 Chen L J, Wu F Q, Zhang X Y, et al. China Synthetic Resin and Plastics, 2008, 25(1), 75.(in Chinese).
陈立军, 武凤琴, 张欣宇, 等. 合成树脂及塑料, 2008, 25(1), 75.
109 Ma L C. Chemical modification of carbon fiber surface and study of its composite interface performance. Ph. D. Thesis, Harbin Institute of Technology, China, 2016(in Chinese).
马丽春. 碳纤维表面化学修饰及其复合材料界面性能研究. 哈尔滨工业大学, 2016.
110 Yang Y W, Yu H W, Wang X, et al. China Elastomerics, 2021, 31(1), 71(in Chinese).
杨玉伟, 余红伟, 王轩, 等. 弹性体, 2021, 31(1), 71.
111 Xuan Z L, Yi J Z, Du S G. Materials Reports, 2006(S2), 443(in Chinese).
宣兆龙, 易建政, 杜仕国. 材料导报, 2006(S2), 443.
112 Tang Y, Ye L, Zhang D, et al. Composites Part a-Applied Science and Manufacturing, 2011, 42(12), 1943.
113 Peng G Q, Yang J J, Cao Z H, et al. Materials Reports, 2011, 25(7), 1(in Chinese).
彭公秋, 杨进军, 曹正华, 等. 材料导报, 2011, 25(7), 1.
114 Bedi H S, Padhee S S, Agnihotri P K. Polymer Composites, 2018, 39, 1184.
115 Fang H D. Crystallization kinetics of carbon fiber-reinforced thermoplastic polymer composites. Ph. D. Thesis, Dalian University of Technology, China, 2021(in Chinese).
方海东. 碳纤维增强热塑性聚合物基复合材料结晶动力学研究. 博士学位论文, 大连理工大学, 2021.
116 Xing K, Xu H B, Yan C, et al. Composites Science and Engineering, 2019(5), 110(in Chinese).
邢开, 徐海兵, 颜春, 等. 复合材料科学与工程, 2019(5), 110.
117 Lin Z Y, Zeng H M. Polymer Bulletin, 2004(5), 56.(in Chinese).
林志勇, 曾汉民. 高分子通报, 2004(5), 56.
118 Wei Y Z, Liang L, Wu J W, et al. Chemistry and Adhesion, 2021, 43(4), 259.(in Chinese).
魏运召, 梁磊, 吴健伟, 等. 化学与粘合, 2021, 43(4), 259. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2023, Vol. 37 
