热处理温度对铝-铝-钢与铝-钛-钢爆炸复合板界面组织与性能的影响

doi:10.11896/cldb.22030278

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (14876KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to evaluate the reliability of Al-Al-steel and Al-Ti-steel explosive clad plates, the property stability and microstructure evolution of Al-steel and Al-Ti interface were compared under different heat treatment temperature. The Al-Al-steel and Al-Ti-steel clad plates were heat treated at 250—550 ℃ for 1 h in a box resistance furnace. After heat treatment, the shear properties and tensile properties of clad plates were tested. The evolution of the interfacial reaction phases was characterized by SEM and HRTEM. The results show that interface microstructure and property of Al-Ti-steel clad steel has more excellent heat stability. The heat treatment temperature damage to the interface performance is smaller and the damage speed is slower for Al-Ti-steel. The continuous intermetallic compounds appeared in Al-steel interface is above 450 ℃. The phase types are Fe₂Al₅ and Fe₄Al₁₃. The Ti-Al intermetallic compounds discontinuously appeared in Al-Ti interface is 500 ℃ and forms a conti-nuous layer product at 550 ℃, and the type is TiAl₃. The thickness of the Al-steel interface product is much greater than the thickness of the Al-Ti interface reaction product. Meanwhile, the thermodynamics and kinetics of reaction phase formation in Fe-Al and Ti-Al systems were analyzed. It was found that the interface reaction driving force of Ti-Al system was smaller than that of Fe-Al system, and the diffusion reaction rate was slower, which may be the main reason for the better microstructure and performance stability of Al-Ti interface.

Key words： Al-Al-steel clad plate Al-Ti-steel clad plate heat treatment temperature intermetallic compounds interface reaction

Published: 10 October 2023 Online: 2023-09-28

CLC number:

TG335.85

Fund:Liaoning Province Science and Technology Major Project (2019JH1/10100014).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	MU Xiaobiao
	PAN Tao
	XIONG Wei
	CHAI Xiyang
	LUO Xiaobing
	CHAI Feng

Cite this article:

MU Xiaobiao,PAN Tao,XIONG Wei, et al. Effect of Heat Treatment Temperatures on the Interface Microstructures and Properties of Al-Al-steel and Al-Ti-steel Explosive Clad Plates[J]. Materials Reports, 2023, 37(19): 22030278-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22030278 OR http://www.mater-rep.com/EN/Y2023/V37/I19/22030278

1 Trethewey K R, Little G T. Construction and Building Materials, 1989, 3(2), 64.
2 Carvalho G, Galvão I, Mendes R, et al. Journal of Materials Processing Technology, 2018, 262, 340.
3 Wu X, Shi C, Fang Z, et al. Materials & Design, 2021, 197, 109279.
4 Aceves S M, Espinosa-Loza F, Huber R. International Journal of Hydrogen Energy, 2015, 40(3), 1490.
5 Fang Z, Shi C, Sun Z, et al. Materials Research Express, 2019, 6(10), 1065f9.
6 Xu Z F, Yu C L. China Water Transport, 2008, 8(6), 156(in Chinese).
许芝芳, 于长亮. 中国水运, 2008, 8(6), 156.
7 Wu A, Song Z, Nakata K, et al. Materials & Design, 2015, 71(6), 85.
8 Yu M, Zhao H, Jiang Z, et al. Journal of Materials Science & Technology, 2019, 35(8), 1543.
9 Xu P Z, Hua X M, Shen C, et al. Materials Characterization, 2021, 178, 111236.
10 Zhang W H, Qiu X M, Sun D Q, et al. Science & Technology of Welding & Joining, 2011, 16(2), 153.
11 Chen L, Fourmentin R, Dermid J. Metallurgical and Materials Transactions A, 2008, 39(9), 2128.
12 Wang S H, Luo X B, Su H, et al. Journal of Iron and Steel Research, 2019, 31(10), 937(in Chinese).
王世宏, 罗小兵, 苏航, 等. 钢铁研究学报, 2019, 31(10), 937.
13 Liu M F, Zhang C S, Meng Z J, et al. Composites Part B, 2022, 230, 109507.
14 Cao M, Wang C J, Deng K k, et al. Journal of Materials Research and Technology, 2021, 14, 1655.
15 Cao R, Yu G, Chen J H, et al. Journal of Materials Processing Technology, 2013, 213(10), 1753
16 Shahverdi H R, Ghomashchi M R, Shabestari S, et al. Journal of Materials Processing Technology, 2002, 124(3), 345.
17 Choi J W, Liu H, Fujii H. Materials Science and Engineering A, 2018, 730, 168.
18 Assari A H, Eghbali B. Journal of Alloys and Compounds, 2019, 773, 50.
19 Pourali M, Abdollah-Zadeh A, Saeid T, et al. Journal of Alloys and Compounds, 2017, 715, 1.
20 Sun Y B, Zhao Y Q, Zhang D, et al. Transactions of Nonferrous Metals Society of China, 2011, 21(8), 1722.
21 Wang Q. Study of interfacial structure and bonding strength for roll-bonding of aluminum film to iron plate. Ph. D. Thesis, Harbin Institute of Technology, 2014(in Chinese).
王谦. 铝薄膜/铁板轧制连接及界面结构与结合强度研究. 博士学位论文, 哈尔滨工业大学, 2014.
22 Kattner U R, Lin J C, Chang Y A. Metallurgical Transactions A, 1992, 23(8), 2081.
23 Han J C, Liu C, Jia Y, et al. The Chinese Journal of Nonferrous Metals, 2020, 30(6), 1270(in Chinese).
韩建超, 刘畅, 贾燚, 等. 中国有色金属学报, 2020, 30(6), 1270.
24 Neumann G, Cornelis T. Self-diffusion and Impurity Diffusion in Pure Metals:Handbook of Experimental Data. Elsevier, UK, 2008, pp 47.
25 Liu B, Yang Q, Wang Y. Results in Physics, 2019, 12, 514.
26 Thiyaneshwaran N, Sivaprasad K, Ravisankar B. Scientific Reports, 2018, 8(1), 1.
27 Bouayad A, Gerometta C, Belkebir A, et al. Materials Science and Engineering, A, 2003, 363(1-2), 53.
28 Cui X, Fan G, Geng L, et al. Materials Science & Engineering A, 2012, 539, 337.
29 Chai X Y, Shi Z R, Chai F, et al. Rare Metal Materials and Enginee-ring, 2019, 48(8), 10(in Chinese).
柴希阳, 师仲然, 柴锋, 等. 稀有金属材料与工程, 2019, 48(8), 10.
30 Chen X, Li L, Zhou D J. The Chinese Journal of Nonferrous Metals, 2015(5), 1176(in Chinese).
陈鑫, 李龙, 周德敬. 中国有色金属学报, 2015(5), 1176.