双金属层状构件界面结合的模拟与实验研究进展

doi:10.11896/cldb.21120136

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (33042KB)
Export: BibTeX | EndNote (RIS)

Abstract The limitation of single-metal material service performance in aerospace, petrochemical, wind power, automobile and other applications is increasingly prominent. Two kinds of metal materials with different physical and chemical properties are bonded to produce a bimetallic composited component. It has incomparable performance advantages of any metal component, and can meet the performance requirement including high strength and high roughness, wear resistance and corrosion resistance for some components serving in the extreme environments. The chemical compositions and structure morphologies of the bimetallic materials are different, leading to the performance difference in different surfaces of the bimetallic materials. Therefore, the interface morphology and performance of the interface between bimetallic components has become the key to produce the bimetallic composited components. In this paper, the numerical simulation and experimental study on the interface bonding of bimetallic component are reviewed based on the present situation of composited process of bimetallic layered component. The influence rules of processing parameters on the interface bonding process are emphasized. The morphologies and evolution characteristics in bonding interface as well as its bonding mechanism are clarified. Combined with the simulation and experimental results, the shortcomings of existing studies on the interface bonding behavior of bimetallic layered components are pointed out, and the research emphasis and trend are prospected.

Key words： bimetallic component interface processing parameter numerical simulation bonding mechanism

Published: 25 July 2023 Online: 2023-07-24

CLC number:	TG331
	TG142

Fund:National Natural Science Foundation of China (52265045,51875383), Natural Science Foundation of Guangxi (2019GXNSFAA245051, 2018GXNSFBA281056), and Open Funding of Key Laboratory of New Processing Technology for Nonferrous Metal & Materials,Ministry of Education/Guangxi Key Laboratory of Optical and Electronic Materials and Devices (20AA-8).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Hengxing
	QIN Fangcheng
	QI Huiping
	WANG Yangbo
	WANG Yujin

Cite this article:

WANG Hengxing,QIN Fangcheng,QI Huiping, et al. Advances in Simulation and Experimental Study on the Interface Bonding of Bimetallic Layered Components[J]. Materials Reports, 2023, 37(14): 21120136-12.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21120136 OR http://www.mater-rep.com/EN/Y2023/V37/I14/21120136

1 Wang Z J, Zhai L, Ma M, et al. Materials Science and Engineering A, 2015, 644(9), 194.
2 Zhang X, Li X J, Hou M S, et al. Heat Treatment of Metals, 2018, 43(11), 62 (in Chinese).
张星, 李秀景, 侯明山, 等. 金属热处理, 2018, 43(11), 62.
3 Wan J. Hebei Metallurgy, 2018(10), 20 (in Chinese).
万佳. 河北冶金, 2018(10), 20.
4 Zhang T, Xu H, Li Z J, et al. Chinese Journal of Engineering, 2021, 43(1), 67 (in Chinese).
张婷, 许浩, 李仲杰, 等. 工程科学学报, 2021, 43(1), 67.
5 Ma Z X, Hu J, Li D F, et al. Chinese Journal of Rare Metals, 2003, 27(6), 799 (in Chinese).
马志新, 胡捷, 李德富, 等. 稀有金属, 2003, 27(6), 799.
6 Zhao S. Numerical simulationand experimental study of asymmetrical rolling composite process for 13Cr/Q235 stainless steel composite plate. Master’s Thesis, Yanshan University, China, 2018 (in Chinese).
赵帅. 13Cr/Q235不锈钢复合板异步轧制复合工艺数值模拟与实验研究. 硕士学位论文, 燕山大学, 2018.
7 Bao Y. The Study on the rolling process of bimetallic seamless steel tube. Master’s Thesis, Tianjin University of Technology, China, 2014 (in Chinese).
鲍岩. 双金属复合无缝钢管轧制成型过程的研究. 硕士学位论文, 天津理工大学, 2014.
8 Xie G L, Sheng H, Han J T, et al. Materials and Design, 2010, 31(6), 3062.
9 Chen L S, Zhang X L, Zheng X P, et al. Rare Metal Materials and Engineering, 2018, 47(10), 3243 (in Chinese).
陈连生, 张鑫磊, 郑小平, 等. 稀有金属材料与工程, 2018, 47(10), 3243.
10 Huang H T, Wang H. Hot Working Technology, 2019, 48(11), 57 (in Chinese).
黄海涛, 王辉. 热加工工艺, 2019, 48(11), 57.
11 Huang H G, Chen P, Ji C. Materials and Design, 2017, 118(3), 233.
12 Liu Y Z, Wang W Y, Huang Y B, et al. Journal of Materials Engineering and Performance, 2019, 28(12), 7241.
13 Ji C, Huang H G, Sun J N, et al. China Mechanical Engineering, 2019, 30(15), 1873 (in Chinese).
季策, 黄华贵, 孙静娜, 等. 中国机械工程, 2019, 30(15), 1873.
14 Shi S Q. Effect of cold rolling and annealing process on interface and properties of cast-rolling Ti/Al composite plate. Master’s Thesis, Henan University of Science and Technology, China, 2017 (in Chinese).
史士钦. 冷轧及退火工艺对铸轧钛铝复合板界面与性能的影响研究. 硕士学位论文, 河南科技大学, 2017.
15 Huang H G, Ji C, Dong Y K, et al. The Chinese Journal of Nonferrous Metals, 2016, 26(3), 623 (in Chinese).
黄华贵, 季策, 董伊康, 等. 中国有色金属学报, 2016, 26(3), 623.
16 Wang W Y, Shi S Q, Shang Z P, et al. Special Casting & Nonferrous Alloys, 2016, 36(10), 1084 (in Chinese).
王文焱, 史士钦, 尚郑平, 等. 特种铸造及有色合金, 2016, 36(10), 1084.
17 Xu J, Gao X, Jiang Z, et al. The International Journal of Advanced Manufacturing Technology, 2016, 86(1), 817.
18 Lu S L, Xiao F R, Guo Z H, et al. Applied Thermal Engineering, 2016, 93(1), 518.
19 Orozco K M, Dessi J G, Afonso C R M, et al. Journal of Manufacturing Processes, 2018, 32(3), 318.
20 Nazari J, Yousefi M, Kerahroodi M S A, et al. International Journal of Materials Lifetime, 2015, 1(1), 20.
21 Watanabe Y, Watanabe S, Matsuura K. Metallurgical and Materials Transactions A, 2004, 35(5), 1517.
22 He J A, Wang Y W, Tong M D, et al. Foundry, 1999 (4), 36 (in Chinese).
何奖爱, 王玉玮, 佟铭铎, 等. 铸造, 1999(4), 36.
23 Guo M H, Cai Y L, Sun H B, et al. Steel Pipe, 2008(1), 38 (in Chinese).
郭明海, 蔡玉丽, 孙红波, 等. 钢管, 2008(1), 38.
24 Yao S J. Special Casting & Nonferrous Alloys, 2002(2), 44 (in Chinese).
姚三九. 特种铸造及有色合金, 2002(2), 44.
25 Gao J Z. Welded Pipe and Tube, 2017, 40(7), 44 (in Chinese).
高建忠. 焊管, 2017, 40(7), 44.
26 Tian H W, Wang A Q, Xie J P, et al. Materials Reports, 2019, 33(10), 1706 (in Chinese).
田捍卫, 王爱琴, 谢敬佩, 等. 材料导报, 2019, 33(10), 1706.
27 Wang A Q, Chen Y, Tian H W, et al. Procedia Manufacturing, 2019, 37(1), 105.
28 Kang G, Li Y G, Chu Z B, et al. Forging & Stamping Technology, 2019, 44(1), 34 (in Chinese).
康庚, 李玉贵, 楚志兵, 等. 锻压技术, 2019, 44(1), 34.
29 Wang Q. Studies on properties and process optimization of stainless steel/aluminum/stainless steel laminated sheet. Master’s Thesis, Taiyuan University of Technology, China, 2011 (in Chinese).
王强. 不锈钢/铝/不锈钢复合板的性能研究与轧制工艺优化. 硕士学业论文, 太原理工大学, 2011.
30 Zhan Q, Zhang Z Y, Su N. Shanxi Metallurgy, 2016, 39(1), 14 (in Chinese).
詹琦, 张志远, 苏宁. 山西冶金, 2016, 39(1), 14.
31 ZhangJ P, Huang H G, Zhao R D, et al. Transactions of Nonferrous Metals Society of China, 2021, 31(3), 626.
32 Zhang J J. Preparation of Al/Mg/Al laminated composite fabricated by hot rolled and investigation of microstructure and mechnaical properties. Ph. D. Thesis, Taiyuan University of Technology, China, 2016 (in Chinese).
张建军. Al/Mg/Al热轧复合板的制备及其微观组织和力学性能研究. 博士学位论文, 太原理工大学, 2016.
33 Wang T X, Hu S J, Wu X B. Hot Working Technology, 2019, 48(3), 179 (in Chinese).
王天翔, 胡尚举, 武显斌. 热加工工艺, 2019, 48(3), 179.
34 Wang D Y. Rolling process and interface behavior of magnesium/aluminum explosive welding composite plate. Master’s Thesis, Taiyuan University of Technology, China, 2017 (in Chinese).
王东亚. 镁/铝爆炸复合板轧制工艺及界面行为研究. 硕士学位论文, 太原理工大学, 2017.
35 Liu W Z. Rolling deformation of magnesium/aluminum explosive welding composite plate. Master’s Thesis, Taiyuan University of Technology, China, 2016 (in Chinese).
刘文拯. 镁/铝爆炸焊接复合板的轧制变形. 硕士学位论文, 太原理工大学, 2016.
36 Qin F C, Qi H P, Li Y T, et al. Materials Reports, 2020, 34(10), 19152 (in Chinese).
秦芳诚, 齐会萍, 李永堂, 等. 材料导报, 2020, 34(10), 19152.
37 Qin F C, Qi H P, Li Y T, et al. Materials Reports, 2021, 35(9), 9049 (in Chinese).
秦芳诚, 齐会萍, 李永堂, 等. 材料导报, 2021, 35(9), 9049.
38 Hou L T, Chen W G, Liu Y B, et al. Transactions of Materials and Heat Treatment, 2014, 35(12), 20 (in Chinese).
侯林涛, 陈文革, 刘盈斌, 等. 材料热处理学报, 2014, 35(12), 20.
39 Liu J G, Han J T, Liu J, et al. Hot Working Technology, 2018, 47(12), 74 (in Chinese).
刘嘉庚, 韩静涛, 刘靖, 等. 热加工工艺, 2018, 47(12), 74.
40 Lyu Z Y. Journal of Plasticity Engineering, 2019, 26(4), 93 (in Chinese).
吕震宇. 塑性工程学报, 2019, 26(4), 93.
41 Yang Y, Li H Z, Liang X P, et al. Hunan Nonferrous Metals, 2020, 36(3), 40 (in Chinese).
杨勇, 李慧中, 梁霄鹏, 等. 湖南有色金属, 2020, 36(3), 40.
42 Wang C Y. Study on interfacial property of steel-Al bonding plate with warm rolling post treatment. Master’s Thesis, Beijing Jiaotong University, China, 2016 (in Chinese).
王晨阳. 钢/铝复合板界面力学性能温轧后处理研究. 硕士学位论文, 北京交通大学, 2016.
43 Xiao H, Qi Z C, Yu C, et al. Journal of Materials Processing Technology, 2017, 249(11), 285.
44 Asemabadi M, Sedighi M, Honarpisheh M. Materials Science & Enginee-ring A, 2012, 558(12), 144.
45 Wang Z Y, Gong X Y, Miao L, et al. Journal of Materials Science and Engineering, 2015, 33(3), 455 (in Chinese).
王泽宇, 龚潇雨, 苗龙, 等. 材料科学与工程学报, 2015, 33(3), 455.
46 Lin C M, Wang Y J, Xu W L, et al. Special Casting & Nonferrous Alloys, 2020, 40(10), 1126 (in Chinese).
林椿梅, 王于金, 徐维良, 等. 特种铸造及有色合金, 2020, 40(10), 1126.
47 Cui Z Q, Tan Y C. Metallurgy and heat treatment theory, Mechanical Industry Press, China, 2007 (in Chinese).
崔忠圻, 谭耀春. 金属学与热处理, 机械工业出版社, 2007.
48 Cai Y J, Yang C, Ren S X, et al. Hot Working Technology, 2021, 50(2), 87 (in Chinese).
蔡雨捷, 杨超, 任双星, 等. 热加工工艺, 2021, 50(2), 87.
49 Zhu Q, Pan D W, Zhang W Q, et al. Steel Rolling, 1989, 6(4), 19 (in Chinese).
朱泉, 潘大炜, 张文奇, 等. 轧钢, 1989, 6(4), 19.
50 Li M Q. Deformation and properties on steel/aluminum metal-laminate material. Master’s Thesis, Hunan University, China, 2009 (in Chinese).
李民权. 钢/铝复合板变形规律和性能的研究. 硕士学位论文, 湖南大学, 2009.
51 Burton M S. Welding Journal, 1954, 33(11), 1051.
52 Wang T, Qi Y Y, Liu J L, et al. Journal of Harbin Institute of Technology, 2020, 52(6), 42 (in Chinese).
王涛, 齐艳阳, 刘江林, 等. 哈尔滨工业大学学报, 2020, 52(6), 42.
53 Mohamed H A, Washburn J. Welding Journal, 1975, 54(9), 302.
54 Jiang L, Zheng X Q, Song J Y, et al. Heat Treatment of Metals, 2019, 44(2), 96 (in Chinese).
姜龙, 郑小平, 宋进英, 等. 金属热处理, 2019, 44(2), 96.
55 Chen Z Q, Tang W, Cao X Q, et al. Light Alloy Fabrication Technology, 2018, 46(12), 21 (in Chinese).
陈志青, 唐巍, 曹晓卿, 等. 轻合金加工技术, 2018, 46(12), 21.
56 Wang J, Lei Y, Liu X H, et al. Chinese Journal of Engineering, 2020, 42(2), 216 (in Chinese).
王珺, 雷宇, 刘新华, 等. 工程科学学报, 2020, 42(2), 216.
57 Chang D X, Wang P, Zhao Y Y, Journal of Northeastern University(Na-tural Science), 2019, 40(11), 1574 (in Chinese).
常东旭, 王平, 赵莹莹. 东北大学学报(自然科学版), 2019, 40(11), 1574.
58 Mao Z P. Study on interfacial structure evolution and bonding property of copper aluminum clad sheet produced by twin-roll casting. Master’s Thesis, Zhengzhou University, China, 2019 (in Chinese).
毛志平. 铜铝铸轧复合板界面结构演变及结合性能研究. 硕士学位论文, 郑州大学, 2019.
59 Sheng L Y, Yang F, Xia T F, et al. Composites:Part B, 2011, 42(9), 1468.
60 Chen J W, Ou Y L, Wen Y, et al. Journal of Net Shape Forming Engineering, 2019, 11(4), 134 (in Chinese).
陈嘉伟, 欧阳柳, 文宇, 等. 精密成形工程, 2019, 11(4), 134.
61 Yang S J. The research on the microstructures and mechanical properties of AZ31B/A356 composite plate fabricated by cast rolling. Master’s Thesis, Lanzhou University of Technology, China, 2019 (in Chinese).
杨世杰. 固-液铸轧AZ31B/A356复合板微观组织及力学性能研究. 硕士学位论文, 兰州理工大学, 2019.
62 Xie W F, Xie J P, Wang A Q, et al. Special Casting & Nonferrous Alloys, 2019, 39(12), 1294 (in Chinese).
谢文芳, 谢敬佩, 王爱琴, 等. 特种铸造及有色合金, 2019, 39(12), 1294.
63 Yu C, Wu Z H, Guo Z X, et al. Iron & Steel, 2018, 53(4), 42 (in Chinese).
余超, 吴宗河, 郭子楦, 等. 钢铁, 2018, 53(4), 42.
64 Liu Y Z, Wang W Y, Huang Y B, et al. Special Casting & Nonferrous Alloys, 2018, 38(11), 1230 (in Chinese).
刘亚洲, 王文焱, 黄亚博, 等. 特种铸造及有色合金, 2018, 38(11), 1230.
65 Huang H G, Dong Y K, Yan M, et al. Transactions of Nonferrous Metals Society of China, 2017, 27(5), 1019.
66 Lu W K, Xie J P, Wang A Q, et al. Materials for Mechanical Engineering, 2014, 38(3), 14 (in Chinese).
路王珂, 谢敬佩, 王爱琴, 等. 机械工程材料, 2014, 38(3), 14.
67 Cheng M Y, Wang A Q, Mao Z P, et al. Journal of Henan University of Science and Technology:Natural Science, 2017, 38(1), 10 (in Chinese).
程明阳, 王爱琴, 毛志平, 等. 河南科技大学学报(自然科学版), 2017, 38(1), 10.
68 Wang S H, Luo X B, Su H, et al. Journal of Iron and Steel Research, 2019, 31(10), 937 (in Chinese).
王世宏, 罗小兵, 苏航, 等. 钢铁研究学报, 2019, 31(10), 937.
69 Yu C. Study on microstructures and interfacial properties of hot-roll bonded titanium steel clad plate. Ph. D. Thesis, Yanshan University, China, 2019 (in Chinese).
余超. 热轧制备钛/钢复合板显微组织和界面性能研究. 博士学位论文, 燕山大学, 2019.
70 Tian S W, Jiang H T, Liu J X, et al. Materials Reports, 2019, 33(24), 4141 (in Chinese).
田世伟, 江海涛, 刘继雄, 等. 材料导报, 2019, 33(24), 4141.