深冷处理对Al2O3-SiCw陶瓷刀具表面完整性及切削性能的影响

doi:10.11896/cldb.21120031

Abstract
Figure/Table
References
Related Citation (9)

Download:

Full Text ( PDF ) (25579KB)
Export: BibTeX | EndNote (RIS)

Abstract The ceramic tool severely wears in the process of high-speed cutting of superalloy. By using cryogenic treatment technology, the surface integrity of the ceramic tool is improved. Moreover, the wear resistance is enhanced during high-speed cutting process. Based on the cryogenic treatment of ceramic tool of Al₂O₃-SiC_w and high-speed cutting superalloy experiments, the effect of cryogenic treatment on the surface integrity and cutting performance of ceramic tools were studied. The research shows that the defects such as pits, groove marks and cracks on the surface of the tool are significantly reduced after the ceramic tool is cryogenically treated. And the Vickers hardness of surface is significantly increased. Compared with untreated tool, the surface residual compressive stress (absolute value) of the ceramic tool can be significantly increased by 70%. On the other hand, the Vickers hardness of the surface of the tool has the greatest impact on chip deformation, cutting force, and tool wear. The improvement of the surface Vickers hardness enhances the wear resistance of the tool. The high cutting performance of the ceramic tool can be obtained at the conditions of cryogenic treatment at -150 ℃ and 18 h.

Key words： cryogenic treatment ceramic tool surface integrity cutting performance cobalt-based superalloy

Published: 25 July 2023 Online: 2023-07-24

CLC number:	TH162
	TG712
	TG148

Fund:Shandong Provincial Natural Science Foundation (ZR2020ME156), National Natural Science Foundation of China (52075306), National Key Research and Development Program of China(2018YFB2001400), and 2020 Shandong Province Key Projects for Major Projects of New and Old Kinetic Energy Conversion Major Projects.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LUO Chuanyue
	ZHENG Guangming
	GAI Shaolei
	JIANG Xiuli
	YANG Xianhai
	CHENG Xiang

Cite this article:

LUO Chuanyue,ZHENG Guangming,GAI Shaolei, et al. Effect of Cryogenic Treatment on Surface Integrity and Cutting Performance of Al₂O₃-SiC_w Ceramic Tools[J]. Materials Reports, 2023, 37(14): 21120031-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21120031 OR http://www.mater-rep.com/EN/Y2023/V37/I14/21120031

1 Du J H, Zhao G P, Deng Q, et al. Journal of Aeronautical Materials, 2016, 36(3), 27(in Chinese).
杜金辉, 赵光普, 邓群, 等. 航空材料学报, 2016, 36(3), 27.
2 Shi C X, Zhong Z Y. Acta Metallurgica Sinica, 2010, 46(11), 1281 (in Chinese).
师昌绪, 仲增墉. 金属学报, 2010, 46(11), 1281.
3 Yang B. Study on high-speed milling and parameter optimization of cobalt-based superalloy. Master’s Thesis, Nanjing University of Aeronautics and Astronautics, China, 2011 (in Chinese).
杨斌. 钴基高温合金的高速铣削及其参数优化研究. 硕士学位论文, 南京航空航天学, 2011.
4 Ye C. Effect of various elements on the microstructure and mismatch in Co-Al-W alloy system. Master’s Thesis, Jiangsu University of Science and Technology, China, 2017(in Chinese).
叶晨. Co-Al-W合金体系中多种元素对合金组织与错配度的影响. 硕士学位论文, 江苏科技大学, 2017.
5 Liu X J, Chen Y C, Lu Y, et al. Acta Metallurgica Sinica, 2020, 56(1), 1(in Chinese).
刘兴军, 陈悦超, 卢勇, 等. 金属学报, 2020, 56(1), 1.
6 Liu C Y. Effects of Cr on the weldability and oxidation properties of novel γ’-strengthened Co-based superalloys. Master’s Thesis, University of Science and Technology of China, China, 2020(in Chinese).
刘彩云. Cr元素对新型沉淀强化钴基高温合金焊接性和抗氧化性的影响. 硕士学位论文, 中国科学技术大学, 2020.
7 Ming W W, Huang X H, Ji M, et al. Ceramics International, 2021, 47(1), 149.
8 Selinder T I, Coronel E, Wallin E, et al. International Journal of Refractory Metals and Hard Materials, 2009, 27(2), 507.
9 Murakami T, Korenaga A, Ohana T. Ceramics International, 2021, 47(2), 1986.
10 Cheng J Y. The study of wear mechanism of PCBN cutting tools in high speed turning of nickel-based superolly. Master’s Thesis, Xiangtan University, China, 2015(in Chinese).
程俊溢. PCBN刀具高速车削镍基高温合金的磨损机理研究. 硕士学位论文, 湘潭大学, 2015.
11 Tian X H, Zhao J, Wang Z B, et al. Ceramics International, 2016, 42(12), 13497.
12 Hao Z P, Han X, Fan Y H. China Mechanical Engineering, 2021, 32(9), 1009(in Chinese).
郝兆朋, 韩雪, 范依航. 中国机械工程, 2021, 32(9), 1009.
13 Zhuang K J. Machining mechanism and experimental investigation on high-efficiency machining of nickel-based super-alloy Inconel 718. Ph. D. Thesis, Huazhong University of Science and Technology, China, 2015(in Chinese).
庄可佳. 镍基高温合金Inconel 718高效加工切削机理与试验研究. 博士学位论文, 华中科技大学, 2015.
14 Bushlya V, Zhou J M, Avdovic P. The International Journal of Advanced Manufacturing Technology, 2013, 68(5-8), 1083.
15 Luo C Y, Zheng G M, Yan P, et al. Modern Manufacturing Enginee-ring, 2021(5), 21(in Chinese).
骆传跃, 郑光明, 颜培, 等. 现代制造工程, 2021(5), 21.
16 Tu L Q, Ming W W, Xu X W, et al. Wear, 2022, 488, 204171.
17 Sankaya M, Şirin Ş, Yıldırım Ç V, et al. Ceramics International, 2021, 47(11), 15542.
18 Li Z Z, Niu X M, Liu W Z, et al. Hot Working Technology, 2019, 48(10), 42(in Chinese).
李佐政, 牛显明, 刘文朝, 等. 热加工工艺, 2019, 48(10), 42.
19 Wang X F, Li Y G, Lei D, et al, Heat Treatment of Metals, 2020, 45(7), 28(in Chinese).
王兴富, 李永刚, 雷达, 等. 金属热处理, 2020, 45(7), 28.
20 Zhirafar S, Rezaeian A, Pugh M. Journal of Materials Processing Technology, 2007, 186(1), 298.
21 Cai H K, Weng Z J, Gu K X, et al. Materials Reports, 2019, 33(1), 175(in Chinese).
蔡惠坤, 翁泽钜, 顾开选, 等. 材料导报, 2019, 33(1), 175.
22 Özbek N A. Journal of Materials Research and Technology, 2020, 9(4), 9442.
23 Thamizhmanii S, Yuvaraj C, Senthilkumar J S, et al. Procedia Manufacturing, 2019, 30, 216.
24 Yu L, Zheng G M, Yang X H, et al. China Mechanical Engineering, 2022, 33(20), 2450(in Chinese).
于良, 郑光明, 杨先海, 等. 中国机械工程, 2022, 33(20), 2450.
25 Akinciolu S, Gğkkaya H, Uygur İ. The International Journal of Advanced Manufacturing Technology, 2015, 78(9), 1609.
26 Leng K. Cryogenic treatment effects on microstructure and performance of TiAlN coated cemented tools. Master’s Thesis, Shandong university, China, 2020(in Chinese).
冷可. 深冷处理对TiAlN涂层硬质合金刀具微观组织和切削性能的影响. 硕士学位论文, 山东大学, 2020.
27 Zhang H J, Dong J H, Chen C, et al. Materials Reports, 2016, 30(2), 554(in Chinese).
张慧婧, 董俊慧, 陈超, 等. 材料导报, 2016, 30(2), 554.
28 Evans A G, Charles E A. Journal of the American Ceramic Society, 1976, 59(7), 371.
29 Li B, Zhang S, Zhang T, et al. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2019, 41(1), 27.
30 Su G S, Liu Z Q, Wan Y, et al. Science China Press, 2012, 42(11), 1305(in Chinese).
苏国胜, 刘战强, 万熠, 等. 中国科学:技术科学, 2012, 42(11), 1305.