7系铝合金焊接技术的研究现状及展望

doi:10.11896/cldb.21010106

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (9723KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper, current situation of welding technologies of the 7XXX series aluminum alloys are summarized and prospected. Currently, primary welding processes that use 7XXX series aluminum alloys include arc welding, friction stir welding, laser welding, and hybrid welding. Arc welding consists of three parts:tungsten inert gas arc welding, metal inertia gas welding, and cold metal transfer welding. The welding of aluminum using an aluminum alloy results in well-crafted and highly efficient products. The 5-series welding wires can effectively prevent heat loss and the occurrence of crack-sensitive regions. Friction stir welding is the most widely used aluminum alloy welding method in manufacturing processes. However, it is not suitable for welding joints with complex shapes. Laser welding has recently been introduced in the industry. Future research on 7-series aluminum alloys will focus on hybrid welding, welding using newly-developed welding wires, double-wire welding, and other methods that will expand the scope of engineering.

Key words： aluminum alloy welding arc welding fricition stir welding laser welding hybrid welding

Published: Online: 2023-07-10

CLC number:

TG457

Fund:Genetic Engineering of Rare Metal Materials in Yunnan Province (Phase I 2020) (202002AB080001-4).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHEN Xuan
	LI Mengnie Victor
	BU Hengyong
	ZUO Hanning

Cite this article:

CHEN Xuan,LI Mengnie Victor,BU Hengyong, et al. Research Status and Progress on the Welding Technologies of 7XXX Series Aluminum Alloy[J]. Materials Reports, 2023, 37(13): 21010106-9.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21010106 OR http://www.mater-rep.com/EN/Y2023/V37/I13/21010106

1 Han S W, Zhou C Z, Peng X Y, et al. Journal of Chongqing University of Technology(Natural Science), 2023, 37(4), 151 (in Chinese).
韩世伟, 周长征, 彭小洋, 等. 重庆理工大学学报(自然科学), 2023, 37(4), 151.
2 Sun W, Zhu Y, Marceau R, et al. Science, 2019, 363(6430), 972.
3 Wang W Q, Zuo H Y, Yang H, et al. Journal of Chongqing University of Technology(Natural Science), 2021, 35(11), 81 (in Chinese).
王维青, 左浩越, 杨宏, 等重庆理工大学学报(自然科学), 2021, 35(11), 81
4 Ma Y L, Zhao X H, Yang B Y, et al. Journal of Chongqing University of Technology(Natural Science), 2020, 34(9), 131 (in Chinese).
麻彦龙, 赵旭晗, 杨炳元, 等重庆理工大学学报(自然科学), 2020, 34(9), 131.
5 Wei Y N, Shang L Y, Jin J, et al. Rare Metal Materials and Engineering, 2016, 45(11), 2774.
6 Huang W F, Huang J G. Welding guidelines of aluminum and aluminum alloy, Hunan Science and Technology Press, China, 2004, pp.220 (in Chinese).
黄旺福, 黄金刚. 铝及铝合金焊接指南, 湖南科学技术出版社, 2004, pp.220.
7 Zhou W S, Yao J S. The welding of aluminum and aluminum alloy, China Machine Press, China, 2006, pp.178 (in Chinese).
周万盛, 姚君山. 铝及铝合金的焊接, 机械工业出版社, 2006, pp.178.
8 Norman A F, Hyde K, Costello F, et al. Materials Science & Engineering A, 2003, 354(1-2), 188.
9 Zeidabadi H, Mirdamadi S, Godarzi M. Russian Journal of Non-Ferrous Metals, 2015, 56(2), 217.
10 Jin L K. Microstructure and properties of Er containing aluminum alloy TIG welding. Master's Thesis, Beijing University of Technology, China, 2011 (in Chinese).
靳立坤. 含铒铝合金TIG焊组织与性能. 硕士学位论文, 北京工业大学, 2011.
11 He R Y, Huang Q B, Cui H B, et al. Materials Reports, 2020, 34(18), 129(in Chinese).
何柔月, 黄启波, 崔洪波, 等. 材料导报, 2020, 34(18), 129.
12 Lin S B, Song J L, Ma G C, et al. Transactions of the China Welding Institution, 2009, 30(7), 9 (in Chinese).
林三宝, 宋建岭, 马广超, 等. 焊接学报, 2009, 30(7), 9.
13 Song Y, Dong H G, Guo X, et al. Welding & Joining, 2014(12), 20 (in Chinese).
宋洋, 董红刚, 郭鑫, 等. 焊接, 2014(12), 20.
14 Liao C Q, Su G Y, Gao Y F, et al. The Chinese Journal of Nonferrous Metals, 2015, 25(1), 43 (in Chinese).
廖传清, 宿国友, 高艳芳, 等. 中国有色金属学报, 2015, 25(1), 43.
15 Wang X L. Study on TIG welding process and properties of spray formed 7xxx series aluminum alloy. Master's Thesis, Jiangsu University of Science and Technology, China, 2011 (in Chinese).
王锡岭. 喷射成形7xxx系铝合金TIG焊工艺及性能研究. 硕士学位论文, 江苏科技大学, 2011.
16 Pan Y, Wu W J, Ouyang Z J. Hot Working Technology, 2020, 49(13), 37 (in Chinese).
潘云, 吴文娟, 欧阳志军. 热加工工艺, 2020, 49(13), 37.
17 Zhang K, Liu Z J. Hot Working Technology, 2019, 48(3), 83 (in Chinese).
张琨, 刘政军. 热加工工艺, 2019, 48(3), 83.
18 Wang P B. Study on ultrasonic-assisted TIG welding process and mechanism of 7075 aluminum alloy. Master's Thesis, Shenyang University of Technology, China, 2019 (in Chinese).
王鹏博. 7075铝合金超声辅助TIG焊接工艺及机理研究. 硕士学位论文, 沈阳工业大学2019.
19 Mehdi H, Mishra R S. Transactions of the Indian Institute of Metals, 2020, 73, 1773.
20 Arizmendi-Salgado V A. International Journal of Electrochemical Science, 2019, 14, 8243.
21 Liu S F, Wang J P. Ordnance Material Science and Engineering, 2018, 41(2), 22 (in Chinese).
刘守法, 王晋鹏. 兵器材料科学与工程, 2018, 41(2), 22.
22 Xu Z A. Journal of Harbin University of Science and Technology, 2013, 18(1), 51 (in Chinese).
许志安. 哈尔滨理工大学学报, 2013, 18(1), 51.
23 Hu S. Chinese Journal of Mechanical Engineering, 2001, 37(9), 18.
24 Murakami T, Nakata K, Tong H J, et al. ISIJ International, 2003, 43(10), 1596.
25 Reyna-Montoya J S, Garcia-Renteria M A, Cruz-Hernandez V L, et al. Transactions of Nonferrous Metals Society of China, 2019, 29(3), 473.
26 Liu Z J, Zhang K, Liu C J. Transactions of the China Welding Institution, 2019, 40(3), 91(in Chinese).
刘政军, 张琨, 刘长军. 焊接学报, 2019, 40(3), 91.
27 Lin F L. Process and control of double-wire MIG welding additive manufacturing by additional protective gas. Master's Thesis, South China University of Technology, China, 2020 (in Chinese).
林方略. 附加保护气双丝MIG焊增材制造工艺与控制. 硕士学位论文, 华南理工大学, 2020.
28 Liu H W, Li J L, Ma B, et al. Hot Working Technology, 2011, 40(9), 117 (in Chinese).
刘红伟, 李京龙, 马冰, 等. 热加工工艺, 2011, 40(9), 117.
29 Feng Y H, Zhou F M. Welding & Joining, 2002(1), 5 (in Chinese).
冯曰海, 周方明. 焊接, 2002(1), 5.
30 Li S Z, Han X H, Xing Y S, et al. Locomotive ＆ Rolling Stock Technology, 2020, 344(4), 26 (in Chinese).
李帅贞, 韩晓辉, 邢艳双, 等. 机车车辆工艺, 2020, 344(4), 26.
31 Song Y B, Li L, Lv J M, et al. The Chinese Journal of Nonferrous Metals, 2018, 28(3), 492 (in Chinese).
宋友宝, 李龙, 吕金明, 等. 中国有色金属学报, 2018, 28(3), 492.
32 Li S, Dong H, Wang X, et al. Journal of Manufacturing Processes, 2020, 54, 80.
33 Sokoluk M, Cao C, Pan S, et al. Nature Communications, 2019, 10(1), 98.
34 Zuo M, Sokoluk M, Cao C, et al. Scientific Reports, 2019, 9(1), 1067.
35 Hongseok C, Woo-hyun C, Hiromi K. Metallurgical & Materials Transactions A, 2013, 44, 1897.
36 Oropeza D, Hofmann D C, Williams K, et al. Journal of Alloys and Compounds, 2020, 834, 154987.
37 Wang P. Study on CMT welding process of Mg/Al dissimilar metals based on the control of energy input process. Ph. D. Thesis, Tianjin Unversity, China, 2017 (in Chinese).
王鹏. 基于CMT焊接能量输入过程控制的镁/铝异种金属焊接研究. 博士学位论文, 天津大学, 2017.
38 Selvi S, Vishvaksenan A, Rajasekar E. Defence Technology, 2018, 14(1), 17.
39 Lin Q, Zeng C, Cao R, et al. International Journal of Heat and Mass Transfer, 2016, 96, 118.
40 Bruckner J. Welding Journal, 2005, 84(6), 38.
41 Zhang H T, Ma J C, Hu L L. Materials Science and Technology, 2012, 20(2), 128(in Chinese)
张洪涛, 冯吉才, 胡乐亮. 材料科学与工艺, 2012, 20(2), 128.
42 Kadoi K, Murakami A, Shinozaki K, et al. Materials Science and Engineering:A, 2016, 666, 11.
43 Tian Y B, Shen J Q, Hu S S, et al. Acta Metallurgica Sinica, 2019, 55(11), 1407 (in Chinese).
田银宝, 申俊琦, 胡绳荪, 等. 金属学报, 2019, 55(11), 1407.
44 Gandhi C, Dixit N, Aranke O, et al. Materials Today:Proceedings, 2018, 5(11), 24024.
45 Zhang X, Chen B, Xie D J. Heat Treatment of Metals, 2020, 45(4), 176 (in Chinese).
张翔, 陈波, 解德杰. 金属热处理, 2020, 45(4), 176.
46 Dai X Y, Xia C Q, Liu C B. Hot Working Technology, 2005(11), 1 (in Chinese).
戴晓元, 夏长清, 刘昌斌. 热加工工艺, 2005(11), 1.
47 Zeng Q, Zhu S W. Materials Protection, 2018(7), 52 (in Chinese).
曾强, 朱绍维. 材料保护, 2018(7), 52.
48 Mishra R S, Ma Z Y. Materials Science & Engineering R, 2005, 50(1-2), 1.
49 Rhodes C G, Mahoney M W, Bingel W H, et al. Scripta Materialia, 1997, 36(1), 69.
50 Zeng J C, Song B, Zou D W, et al. Materials Report, 2021, 35(7), 7162 (in Chinese).
曾金成, 宋波, 左敦稳, 等. 材料导报, 2021, 35(7), 7162.
51 Zhang Z Q, He C S, Zhao S, et al. Journal of Northeastern University (Natural Science), 2020, 41(12), 1708 (in Chinese).
张志强, 何长树, 赵夙, 等. 东北大学学报(自然科学版), 2020, 41(12), 1708.
52 Periyasamy Y K, Perumal A V, Rajasekaran D. Transactions of the Indian Institute of Metals, 2018, 71(1), 2575.
53 Zhao Y, Wang Q, Chen H, et al. Materials & Design, 2014, 56(4), 725.
54 Ji P F, Zhang Z, Zhao G H, et al. Aerospace Materials & Technology, 2020, 50(3), 6 (in Chinese).
计鹏飞, 张振, 赵光辉, 等. 宇航材料工艺, 2020, 50(3), 6.
55 Wu Q. Numerical study of fatigue life of welding tools and microstructure evolution in friction stir welding. Ph. D. Thesis, Dalian University of Technology, China, 2018 (in Chinese).
吴奇. 搅拌摩擦焊搅拌头疲劳寿命和构件微结构演化数值模拟. 博士学位论文, 大连理工大学, 2018.
56 Sun L Y. Study on firction stir welding microstructure and properties of 7xxx aluminum alloy. Master's Thesis, Beijing Jiaotong Univercity, China, 2017 (in Chinese).
孙鲁怡. 7xxx铝合金搅拌摩擦焊焊接接头组织与性能研究. 硕士学位论文, 北京交通大学, 2017.
57 Xu W F, Wu X K, Ma J, et al. Journal of Materials Research and Technology, 2019, 8(6), 6029.
58 Wang Y, Chai P, Ma H, et al. Journal of Materials Science, 2020, 55(1), 358.
59 Zhang C, Cao Y, Huang G, et al. Journal of Manufacturing Processes, 2020, 49, 214.
60 Zhou Q H, Liu Z, Du T, et al. Material Sciences, 2021, 11(4), 317 (in Chinese).
周青华, 刘州, 杜涛, 等. 材料科学, 2021, 11(4), 317.
61 Chen X. Effect of high frequency micro-vibration on microstructure and fatigue properties during laser welding. Master's Thesis, Shanghai University of Engineering Science, China, 2017 (in Chinese).
陈轩. 高频微振激光焊接接头显微组织与疲劳性能的研究. 硕士学位论文. 上海工程技术大学, 2017.
62 Zhao H, White D R, Debroy T. Metallurgical Reviews, 1999, 44(6), 238.
63 Chen X, Lu Q H, Zhang J, et al. Journal of Mechanical Engineering, 2016, 52(20), 60 (in Chinese).
陈轩, 卢庆华, 张静, 等. 机械工程学报, 2016, 52(20), 60.
64 Xue S B, Wang B, Zhang L, et al. Materials Reports, 2019, 33(17), 2813.
薛松柏, 王博, 张亮, 等. 材料导报, 2019, 33(17), 2813.
65 Cai Z W, Lu Q H, Zhang C, et al. Transactions of the China Welding Institution, 2019, 40(1), 53 (in Chinese).
蔡遵武, 卢庆华, 张成, 等. 焊接学报, 2019, 40(1), 53.
66 Dausinger F, Chen X, Fujioka T, et al. Proceedings of SPIE-The International Society for Optical Engineering, 2000, 3888, 367.
67 Paleocrassas A G, Tu J F. ICALEO 2005:24th International Congress on Laser Materials Processing and Laser Microfabrication, 2005, 2005(1), 503.
68 Zhang W, Lu Q H, Ren X H, et al. Chinese Journal of Laser, 2019, 46(3), 107 (in Chinese).
张巍, 卢庆华, 任新怀, 等. 中国激光, 2019, 46(3), 107.
69 Zhang W, Lu Q H, Zhang P L, et al. Materials Research Express, 2019, 6(4), 4654.
70 Manjhi S K, Das A, Prasad S B. Materials Today:Proceedings, 2020. 26, 1255.
71 Liu C C, Liu C, Zhu Z, et al. Journal of Harbin Institute of Technology, 2021, 53(2), 93 (in Chinese).
刘成财, 刘琛, 朱智, 等. 哈尔滨工业大学学报, 2021, 53(2), 93.
72 Yu Z H, Zhang D T, Zhang W, et al. Hot Working Technology, 2020, 49(5), 41 (in Chinese).
俞宗华, 张大童, 张文, 等. 热加工工艺, 2020, 49(5), 41.
73 Zhao Y, Liu H, Yang T, et al. The International Journal of Advanced Manufacturing Technology, 2016, 83(9-12), 1467.
74 Hou Y X, Luo Z Y, Yi Y Y, et al. Laser Technology, 2020, 44(3), 304 (in Chinese).
侯艳喜, 罗子艺, 易耀勇, 等. 激光技术, 2020, 44(3), 304.
75 Zhang Y, Song X P, Chang L Y, et al. Rare Metal Materials and Engineering, 2017, 46(9), 2411.
76 Chen Y, Yang Z, Shi C, et al. Materials, 2019, 12(22), 3651.
77 Faraji A H, Goodarzi M, Seyedein S H, et al. Welding in the World, 2016, 60(1), 137.
78 Zhou J, Tsai H L. Journal of Physics D:Applied Physics, 2009, 42(9), 955.
79 She P, Sun W G, Ma C P. Electric Welding Machine, 2020, 50(4), 111 (in Chinese).
佘鹏, 孙维光, 马传平. 电焊机, 2020, 50(4), 111.
80 Wen P, Li Z X, Zhang S, et al. Chinese Journal of Lasers, 2020, 47(8), 82 (in Chinese).
温鹏, 栗忠秀, 张松, 等. 中国激光, 2020, 47(8), 82.
81 Han X H, Li S Z, Mao Z D, et al. Chinese Journal of Lasers, 2019, 46(12), 86 (in Chinese).
韩晓辉, 李帅贞, 毛镇东, 等. 中国激光, 2019, 46(12), 86.
82 Cornacchia G, Cecchel S, Panvini A. The International Journal of Advanced Manufacturing Technology, 2018, 94(5-8), 2017.
83 Lei Z L, Li B W, Zhu P G, et al. Chinese Journal of Lasers, 2018, 45(10), 103 (in Chinese).
雷正龙, 黎炳蔚, 朱平国, 等. 中国激光, 2018, 45(10), 103.