腐蚀条件下高强钢超高周疲劳性能及损伤机理研究进展

doi:10.11896/cldb.21040055

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (7878KB)
Export: BibTeX | EndNote (RIS)

Abstract The process of crack initiation, propagation and fracture with more than 10⁷ cycles under fatigue load is called very high cycle fatigue. Parts of machines made of high strength steel need to be used in corrosive environment, and they need to bear up to 10⁸—10¹¹ fatigue loads during the service life. The problem of very high cycle fatigue of high strength steel in corrosive environment has become a key problem affecting the reliability and safety of structures, and it has become an urgent difficulty to be solved in aerospace, automobile, high-speed railway and other fields.
Thanks to the summary and accumulation of metal materials on traditional fatigue problems and the help of advanced test methods, many scholars have developed a variety of new test methods to study the very high cycle fatigue of high strength steel under corrosive conditions. At present, the core problems such as the degradation law and damage mechanism of very high cycle fatigue properties of high strength steel under corrosive conditions, the competition mechanism of crack initiation and initial crack propagation behavior under corrosive conditions, and the effect of hydrogen on very high cycle fatigue properties of high strength steel and the formation mechanism of granular bright facet are becoming more and more clear. Moreover, some research results have been gradually applied in engineering practice.
In this review, the very high cycle fatigue damage characteristics of high strength steel without corrosion are briefly described from the perspective of S-N curve. Then the effects of typical corrosive media on very high cycle fatigue properties of high strength steel are summarized, also it is pointed out that hydrogen embrittlement fracture is one of the fracture mechanisms of high strength steel in corrosive environment. Then, the research progress of hydrogen on very high cycle fatigue properties of high strength steel and the formation mechanism of granular bright facet are described in detail. Finally, several key issues are prospected.

Key words： very high cycle fatigue(VHCF) high strength steel corrosive medium fatigue strength crack initiation

Published: 25 June 2023 Online: 2023-06-20

CLC number:

TB301

Fund:National Natural Science Foundation of China (51375490) and ‘Green Innovation Science and Technology Plan’ of Colleges and Universities in Shandong Province (2020KJA014).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WU Xingjun
	CHEN Yueliang
	ZHANG Yong
	BIAN Guixue
	ZHANG Yangguang
	WANG Andong
	ZHANG Zhuzhu

Cite this article:

WU Xingjun,CHEN Yueliang,ZHANG Yong, et al. Research Progress on Very High Cycle Fatigue Performance and Damage Mechanism of High Strength Steel Under Corrosion Condition[J]. Materials Reports, 2023, 37(12): 21040055-11.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21040055 OR http://www.mater-rep.com/EN/Y2023/V37/I12/21040055

1 Wu F M. Structural fatigue strength, Northwestern Polytechnical University Press, China, 1985, pp.16 (in Chinese).
吴富民. 结构疲劳强度, 西北工业大学出版社, 1985, pp.16.
2 Suresh S. Fatigue of materials, Wang G Z, translate. Second edition. National Defence Industrial Press, China, 1993, pp.158 (in Chinese).
Suresh S. 材料的疲劳, 王中光, 译. 第二版. 国防工业出版社, 1993, pp.158.
3 Asami K, Sugiyama Y. Journal of the Japan Society for Heat Treatment, 1985, 25(3), 147.
4 Hong Y S, Sun C Q, Liu X L. Advances in Mechanics, 2018 (1), 1 (in Chinese).
洪友士, 孙成奇, 刘小龙. 力学进展, 2018 (1), 1.
5 Xu W, Huang M H, Wang J L, et al. Acta Metallurgica Sinica, 2020, 56(4), 81 (in Chinese).
徐伟, 黄明浩, 王金亮, 等. 金属学报, 2020, 56(4), 81.
6 Perez-mora R, Palin-luc T, Bathias C, et al. International Journal of Fatigue, 2015, 74(5), 156.
7 Xie D G, Li M, Shan Z W. Materials China, 2018, 37(3), 215 (in Chinese).
解德刚, 李蒙, 单智伟. 中国材料进展, 2018, 37(3), 215.
8 Yang C, Luan Y, Li D, et al. International Journal of Fatigue, 2020, 131(2), 105263.
9 Hong Y S, Zhao A G, Qian G A. Acta Metallurgica Sinica, 2009, 45(7), 769 (in Chinese)
洪友士, 赵爱国, 钱桂安. 金属学报, 2009, 45(7), 769.
10 Murakami Y, Yokoyama N N, Nagata J. Fatigue & Fracture of Engineering Materials & Structures, 2002, 25(8-9), 735.
11 Shiozawa K, Lu L. Fatigue & Fracture of Engineering Materials & Structures, 2002, 25(8-9), 813.
12 Zhang J M, Li S X, Yang Z G. International Journal of Fatigue, 2007, 29(4), 765.
13 Tanaka T K. International Journal of Fatigue, 2006, 28(11), 1555.
14 Hong Y, Zhao A, Qian G, et al. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2012, 43A(8), 2753.
15 Murakami Y, Nomoto T, Ueda T, et al. Fatigue & Fracture of Engineering Materials & Structures, 1999, 22, 581.
16 Sakai T, Sato Y, Oguma N. Fatigue & Fracture of Engineering Materials & Structures, 2010, 25(664), 765.
17 Ochi Y, Matsumura T, Masaki K, et al. Fatigue & Fracture of Engineering Materials & Structures, 2002, 25(8-9), 823.
18 Shiozawa K, Lu L, Ishihara S. Fatigue & Fracture of Engineering Materials & Structures, 2001, 24(12), 781.
19 Cheng L, Jiao S B, Li Q T, et al. Very high cycle fatigue and fracture, National Defence Industrial Press, China, 2017, pp.109 (in Chinese).
程礼, 焦胜博, 李全通, 等. 超高周疲劳与断裂, 国防工业出版社, 2017, pp.109.
20 Mughrabi H. Fatigue & Fracture of Engineering Materials & Structures, 1999, 22(7), 633.
21 Miller K J, O’donnell W J. Fatigue & Fracture of Engineering Materials & Structures, 1999, 22(7), 545.
22 Holper B, Mayer H, Vasudevan A K, et al. International Journal of Fatigue, 2004, 26, 27.
23 Murakami Y, Usuki H. International Journal of Fatigue, 1989, 11(5), 299.
24 Guennec B, Ueno A, Sakai T, et al. International Journal of Fatigue, 2014, 66(9), 29.
25 Cao C, Zhen S S, Hu W B, et al. Material Reports, 2020, 34(6), 11162 (in Chinese).
曹琛, 郑山锁, 胡卫兵, 等. 材料导报, 2020, 34(6), 11162.
26 Mayer H. Fatigue & Fracture of Engineering Materials and Structures, 2016, 39(1), 3.
27 Song Y N, Xu B S, Wang H D, et al. Rare Metal Materials and Engineering, 2016, 45(5), 1203 (in Chinese).
宋亚南, 徐滨士, 王海斗, 等. 稀有金属材料与工程, 2016(5), 1203.
28 Bayraktar E, Mora R, Garcia I M, et al. International Journal of Fatigue, 2009, 31(10), 1532.
29 Nakajima M, Tokaji K, Itoga H. Fatigue & Fracture of Engineering Materials & Structures, 2003, 26(12), 1113.
30 Qian G A, Hong Y S. Acta Metallurgica Sinica, 2009(11), 80 (in Chinese).
钱桂安, 洪友士. 金属学报, 2009(11), 80.
31 Schmid S, Hahn M, Issler S, et al. International Journal of Fatigue, 2014, 60(5), 90.
32 Bannikov M V, Naimark O B. Procedia Structural Integrity, 2016(2), 1071.
33 Tokaji K, Ko H N, Nakajima M, et al. Materials Science & Engineering A, 2003, 345(1-2), 197.
34 Hong Y S, Qian G A. Key Engineering Materials, 2011, 462-463, 355.
35 Qian G, Zhou C, Hong Y S. Acta Materialia, 2011, 59(4), 1321.
36 Qian G, Zhou C, Hong Y S. International Journal of Fatigue, 2015, 71(1), 35.
37 Schoenbauer B M, Stanzl-tschegg S E, Perlega A, et al. International Journal of Fatigue, 2014, 65(8), 33.
38 Schoenbauer B M, Perlega A, Karr U P, et al. International Journal of Fatigue, 2015, 76(7), 19.
39 Schoenbauer B M, Stanzl-tschegg S E, Perlega A, et al. Engineering Fracture Mechanics, 2015, 147, 158.
40 Palin-luc T, Rubén P, Bathias C, et al. Engineering Fracture Mechanics, 2010, 77(11), 1953.
41 Issler S, Bacher-hoechst M, Schmid S. Materials Science Forum, 2014, 783-786, 1845.
42 Ebara R. Materials Science and Engineering A, 2007, 468-470, 109.
43 Ebara R. International Journal of Fatigue, 2006, 28(11), 1465.
44 Wang J, Zhang Y, Liu S, et al. International Journal of Fatigue, 2016, 87, 203.
45 Zhang M, Wang W Q, Liu P F, et al. Engineering Failure Analysis, 2016, 664, 231.
46 Li S Y, Hu R S, Zhao R M, et al. Surface Technology, 2020(8), 15 (in Chinese).
李守英, 胡瑞松, 赵卫民, 等. 表面技术, 2020(8), 15.
47 Han C S. Atlas of microstructure on matals corrosion, National Defense Industry Press, China, 2008, pp.195 (in Chinese).
韩顺昌. 金属腐蚀显微组织图谱, 国防工业出版社, 2008, pp.195.
48 Li Y D, Chen S M, Liu Y B, et al. Journal of Materials Science, 2010, 45(3), 831.
49 Sanchez J, Lee S F, Martin-Rengel M A, et al. Engineering Failure Analysis, 2015, 59, 467.
50 Li Y D, Xu N, Shi J B, et al. Transactions of Materials and Heat Treatment, 2015, 36(5), 77 (in Chinese).
李永德, 徐娜, 时军波, 等. 材料热处理学报, 2015, 36(5), 77.
51 Li Y D, Yang Z G, Li S X, et al. Advanced Engineering Materials, 2009, 11(7), 561.
52 Li Y D, Yang Z G, Liu Y B, et al. Materials Science & Engineering A, 2008, 489(1-2), 373.
53 Silverstein R, Eliezer D, Tal-gutelmacher E. Journal of Alloys & Compounds, 2018, 747, 511.
54 Zhou C, Zhang Y J, Hui W J, et al. Journal of Iron and Steel Research, International, 2013, 20(12), 92.
55 Murakami Y, Matsunaga H, International Journal of Fatigue, 2006, 28(11), 1509.
56 Li S X, Weng Y Q, Hui W J, et al. Very high cycle fatigue properties of high strength steels, Metallurgical Industry Press, China, 2010, pp.53 (in Chinese).
李守新, 翁宇庆, 惠卫军, 等. 高强度钢超高周疲劳性能, 冶金工业出版社, 2010, pp.53.
57 Yukitaka M, Junji N. Journal of the Society of Materials Science Japan, 2005, 54(4), 420.
58 Furuya Y, Hirukawa H, Hayakawa M. Metallurgical & Materials Tran-sactions A, 2010, 41(9), 2248.
59 Karsch T, Bomas H, Zoch H W, et al. International Journal of Fatigue, 2014, 60, 74.
60 Chapetti M D, Tagawa T, Miyata T. Materials Science and Engineering A, 2003, 356(1-2), 236.
61 Li Y D, Xu N, Guo W M, et al. Journal of Materials Engineering, 2014(2), 91 (in Chinese).
李永德, 徐娜, 郭卫民, 等. 材料工程, 2014(2), 91.
62 Hong Y, Lei Z, Sun C, et al. International Journal of Fatigue, 2014, 58, 144.
63 Murakami Y, Nomoto T, Ueda T. Fatigue & Fracture of Engineering Materials & Structures, 2000, 23(11), 903.
64 Tanaka K, Akiniwa Y. Fatigue & Fracture of Engineering Materials & Structures, 2002, 25(8-9), 775.
65 Takai K, Homma Y, Izutsu K, et al. The Journal of the Japan Institute of Metals, 1996, 60(12), 1155.
66 Murakami Y, Nomoto T, Ueda T, et al. Fatigue & Fracture of Engineering Materials & Structures, 2000, 23(11), 893.
67 Yang Z G, Li S X, Liu Y B, et al. International Journal of Fatigue, 2008, 30(6), 1016.
68 Birnbaum H K, Sofronis P. Materials Science and Engineering: A, 1994, 176(1-2), 191.
69 Liu Y B, Yang Z G, Li Y D, et al. Materials Science and Engineering A, 2008, 497(1-2), 408.
70 Paolino D S, Tridello A, Chiandussi G, et al. Fatigue & Fracture of Engineering Materials & Structures, 2016, 39(11), 1319.
71 Chai G, Zhou N. Ultrasonics, 2013, 53(8), 1406.
72 Istomin K, Benjamin D, Schell N, et al. International Journal of Fatigue, 2014, 66, 177.
73 Ebara R. Procedia Engineering, 2016, 160, 21.