| POLYMERS AND POLYMER MATRIX COMPOSITES |
|
|
|
|
|
| Preparation and Elasticity & Thermal Insulation Properties of Flexible Fiber Blankets |
| XUE Yunjia, LIU Jiachen*
|
| School of Material Science and Engineering,Tianjin University, Tianjin 300350, China |
|
|
|
|
Abstract Flexible fiber felt blankets were often used in the past as a reusable thermal insulation material for thermal protection on the leeward side of hypersonic vehicles. In addition, owing to its superior flexibility and elasticity, this material has promising applications in the field of thermal sealing. In this study, based on the potential demand for thermal sealing of flexible fiber blankets, we conducted research on the temperature resistance level, elastic properties, and thermal insulation performance of flexible fiber blankets and their cotton cores to reveal the heat transfer mode and deformation characteristics of this type of flexible fiber insulation material. In this study, we proposed the application environment range of this material to provide the research foundation for the design, research and development of this fiber insulation material in the field of thermal barried sealing. The results show that the resilience rate of flexible cotton cores was greater than 80% when compressed by 30%. Furthermore, the resilience attenuated as the number of compression cycles increased, and the deformation caused by compression increased the thermal conductivity of the cores. When the temperature reached above 1 100 ℃, the quartz cotton cores underwent significant volume contraction. The flexible thermal insulation felt has excellent thermal insulation ability and it can maintain the back side temperature below 200 ℃ when its front side temperature is maintained at 1 000 ℃ for 60 min.
|
|
Published: 10 February 2023
Online: 2023-02-23
|
|
|
| Fund:The National Natural Science Foundation of China (51671287). |
|
|
1 Yang C, Song S F. Knowledge is Power, 1996,5(12), 42(in Chinese).
杨超, 宋寿峰. 知识就是力量, 1996,5(12), 42.
2 Guang B. Aerospace China, 2000(8), 23(in Chinese).
光波.中国航天,2000(8), 23.
3 Jiang G Q, Yu J J. Aerospace Materials & Technology, 2006,36(1), 27(in Chinese).
姜贵庆,俞继军.宇航材料工艺,2006,36(1), 27.
4 Su F, Meng X H. Aerodynamic Missile Journal, 2006(10), 57(in Chinese).
苏芳,孟宪红.飞航导弹, 2006(10), 57.
5 Demange J J, Dunlap P H, Steinetz B M.In:42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. California: AIAA, 2006, pp.1.
6 Livengood R H, Vas J A, Coad J E.Proc Spie, 2011, 7901(1), 11.
7 Scotti S J, Clay C, Rezin M. AIAA/ICAS International Symposium and Exposition, 2008, 21(5), 1.
8 Li J N, Hu Z J, Sun C C, et al. Aerospace Materials & Technology, 2011, 41(6), 10(in Chinese).
李俊宁, 胡子君, 孙陈诚, 等.宇航材料工艺, 2011, 41(6), 10.
9 Lin H, Feng J, Feng J Z, et al.Materials Reports A: Review Papers, 2015, 29(11), 29(in Chinese).
林浩, 冯坚, 冯军宗, 等.材料导报:综述篇, 2015, 29(11), 29.
10 Yang G W, Hu H F, Zhang Y D, et al. Materials Reports, 2008(1), 42(in Chinese).
杨国威, 胡海峰, 张玉娣, 等.材料导报, 2008(1), 42.
11 Kourtides D A,Tran H K, Chiu S A. NASA-TM-103836.
12 Beck R A S,Driver D M, Wright M J, et al. AIAA 2009-4229.
13 Xue Y J. Preparation and properties of braided spring/ceramic fiber thermal barrier seals. Master’s Thesis, Tianjin University, China, 2018(in Chinese).
薛云嘉. 编织弹簧-陶瓷纤维热密封组件的制备及其性能的研究. 硕士学位论文, 天津大学, 2018.
14 Zhen Q, Zhang D H, Wang J M, et al, Acta Materiae Compositae Sinica, 2008(1), 105(in Chinese).
甄强, 张大海, 王金明,等.复合材料学报, 2008(1), 105. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2023, Vol. 37 
