热处理对木材吸湿吸水性的影响及其机理研究概述

doi:10.11896/cldb.20100270

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (6003KB)
Export: BibTeX | EndNote (RIS)

Abstract The intensified contradiction between the supply and the demand of China's timber resources has fueled the emergence of a more efficient way of utilizing artificial woods, as one of the major strategic decisions, for its sustainable development in forestry. Although China owns the largest coverage of man-made forest globally, the poor quality of wood limits its application range. Hence, wood modification is of great significance for the desired performance and functionality as it can improve both physical properties and mechanical properties of the timber. Heat treatment, an important wood modification technology, which can effectively strengthen the dimensional stability and durability of wood, has been widely applied in industries. However, whether the products are used indoors or outdoors, the performance of heat-treated wood will still be affected due to its own water adsorption and absorption properties. It is essential to explore how thermal modification affects moisture adsorption and absorption properties, in order to further reduce the detrimental effects of moisture, and to ensure an efficient implementation. This paper elaborates and summarizes the research status and the progress of changes of moisture adsorption and water absorption properties in heat-treated wood, as well as the main influencing factors and mechanisms. Meanwhile, it also discusses some existing problems and future research directions, which is expected to provide references to the optimization of modification process, the improvement of quality and the control of dimension stabilization of modified wood.

Key words： heat-treated wood moisture adsorption water absorption chemical composition pore structure

Published: 10 August 2022 Online: 2022-08-15

CLC number:

S781

Fund:National Natural Science Foundation of China (31971591), the Natural Science Foundation of Hunan Province (2020JJ5978) and Zhejiang Province Public Welfare Technology Application Research Project (LGG22C160002).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GAO Yulei
	XU Kang
	ZHAN Tianyi
	JIANG Jinghui
	JIANG Jiali
	ZHAO Liyuan
	LYU Jianxiong

Cite this article:

GAO Yulei,XU Kang,ZHAN Tianyi, et al. Effects of Heat Treatment on Moisture Adsorption and Water Absorption of Wood and Underlying Occurrences: a Mini Review[J]. Materials Reports, 2022, 36(15): 20100270-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20100270 OR http://www.mater-rep.com/EN/Y2022/V36/I15/20100270

1 Li J P, Qian J, He Z B, et al. Journal of Northeast Forestry University, 2018, 46(4), 43(in Chinese).
李金朋, 钱京, 何正斌,等. 东北林业大学学报, 2018, 46(4), 43.
2 Zhan T Y, Kuai B B, Lyu C, et al. Journal of Forestry Engineering, 2019, 4(5), 34(in Chinese).
詹天翼, 蒯炳斌, 吕超,等. 林业工程学报, 2019, 4(5), 34.
3 Wang L Y. Study on wood crack propagation and fracture behavior. Ph.D. Thesis, Beijing Forestry University, China, 2002 (in Chinese).
王丽宇. 木材裂纹扩展及其断裂行为的研究.博士学位论文, 北京林业大学, 2002.
4 Lyu J X, Huang R F, Cao Y J, et al. Scientia Silvae Sinicae, 2012, 48(1), 126(in Chinese).
吕建雄, 黄荣凤, 曹永建,等. 林业科学, 2012, 48(1), 126.
5 Shi Q, Bao F C, Lyu J X, et al. Journal of Central South University of Forestry & Technology, 2011, 31(2), 109(in Chinese).
史蔷, 鲍甫成, 吕建雄,等. 中南林业科技大学学报, 2011, 31(2), 109.
6 Gu L B, Ding T, Jiang N. Journal of Forestry Engineering, 2019, 4(4), 1(in Chinese).
顾炼百, 丁涛, 江宁.林业工程学报, 2019, 4(4), 1.
7 Lyu J X, Jiang J H, Huang R F, et al. High temperature heat treatment technology and application of wood, Science Press, China, 2020 (in Chinese).
吕建雄, 江京辉, 黄荣凤,等. 木材高温热处理技术与应用, 科学出版社, 2020.
8 Hosseinpourpia R, Adamopoulos S, Holstein N, et al. Polymer Degradation & Stability, 2017, 138, 161.
9 Altgen M, Willems W, Hosseinpourpia R, et al. Polymer Degradation & Stability, 2018, 152, 244.
10 Inari G N, Petrissans M, Lambert J, et al. Surface & Interface Analysis, 2006, 38(10), 1336.
11 Esteves B M, Pereira H M. Bioresources, 2009, 4(1), 370.
12 Nuopponen M, Vuorinen T, Jämsä S, et al. Journal of Wood Chemistry & Technology, 2005, 24(1), 13
13 Kaygin B, Gunduz G, Aydemir D. Drying Technology, 2009, 27(1), 89.
14 Borrega M, Kärenlampi P P. European Journal of Wood & Wood Pro-ducts, 2010, 68(2), 233.
15 Zhan T, Sun F, Lyu C, et al. Holzforschung, 2019, 73(12), 1113.
16 Zauer M, Prinz C, Adolphs J, et al. Wood Science & Technology, 2018, 52, 957.
17 Tiemann H D. Lumber World Review, 1915, 28(7), 19.
18 Tjeerdsma B, Boonstra M, Militz H. In: The International Research Group On Wood Preservation, Section 4—Processes, 29th Annual Mee-ting. Maastricht, Netherlands, 1998.
19 Kamdem D P, Pizzi A, Jermannaud A. Holz als Roh-und Werkstoff, 2002, 60(1), 1.
20 Altgen M, Hofmann T, Militz H. Wood Science & Technology, 2016, 50(6), 1181.
21 Hill C A S. Wood modification: chemical, thermal and other processes, John Wiley & Sons, Hoboken, 2006, pp.99.
22 Jiang J, Lu J, Zhou Y, et al. Wood Science & Technology, 2014, 48(2), 253.
23 Wu G F, Wei C Y, Zeng J Q, et al. Chinese Agricultural Science Bulletin, 2011, 27(19), 44 (in Chinese).
巫国富, 韦春义, 曾俊钦, 等. 中国农学通报, 2011, 27(19), 44.
24 Li X J, Liu Y, Su H Z, et al. Practical Forestry Technology, 2008(10), 50(in Chinese).
李贤军, 刘元, 苏洪泽, 等. 林业科技通讯, 2008(10), 50.
25 Hoffmeyer P, Jensen S K, Jones D, et al. In: Proceedings of the first European Conference on wood modification: European Thematic Network for Wood Modification. Belgium, 2003, pp.177.
26 Cao J Z, Zhao G J. Journal of Beijing Forestry University, 1997(4), 26 (in Chinese).
曹金珍, 赵广杰. 北京林业大学学报, 1997(4), 26.
27 Ding T, Gu L B, Cai J B. Journal of Nanjing Forestry University (Natural Sciences Edition), 2015(2), 143 (in Chinese).
丁涛, 顾炼百, 蔡家斌.南京林业大学学报(自然科学版), 2015(2), 143.
28 Jalaludin Z, Hill C A S, Xie Y J, et al. Wood Material Science & Engineering, 2010, 5(3-4), 194.
29 Hill C A S, Ramsay J, Laine K, et al. Journal of the Institute of Wood Science, 2013, 4(3), 191.
30 Olek W, Majka J, Czajkowski Ł. Holzforschung, 2013, 67(2), 183.
31 Gao X, Zhou F, Fu Z Y, et al. Journal of Forestry Engineering, 2018, 3(4), 25 (in Chinese).
高鑫, 周凡, 付宗营, 等. 林业工程学报, 2018, 3(4), 25.
32 Jalaludin Z, Hill C A S, Samsi H W, et al. Holzforschung, 2010, 64(6), 763.
33 Kymäläinen M, Rautkari L, Hill C A S. Journal of Materials Science, 2015, 50(23), 7673.
34 Kymäläinen M, Mlouka S B, Belt T, et al. Journal of Materials Science, 2017, 53(4), 3027.
35 Hill C A S, Keating B, Laine K, et al. Journal of Materials Science, 2012, 47(7), 3191.
36 Källbom S, Rautkari L, Wålinder M, et al. International Wood Products Journal, 2016, 7(3), 116.
37 Li X J, Fu F, Cai Z Y, et al. Journal of Central South University of Forestry & Technology, 2010, 30(6), 92 (in Chinese).
李贤军, 傅峰, 蔡智勇, 等. 中南林业科技大学学报, 2010, 30(6), 92.
38 Cao Y, Lu J, Jiang J. European Journal of Wood & Wood Products, 2011, 70(4), 441.
39 Militz H. In: International research group on wood preservation . Sweden, 2002, pp.1.
40 Esteves B, Marques A V, Domingos I, et al. Wood Science & Technology, 2007, 41(3), 193.
41 Esteves B, Domingos I, Pereira H. Forest Products Journal, 2007, 57(1), 47.
42 Esteves B, Graça J, Pereira H. Holzforschung, 2008, 62(3), 344.
43 Xing D. Quality evaluation and micro-mechanical properties study of biomas gas heat-treated wood, Ph.D. Thesis, Northeast Forestry University, China, 2016 (in Chinese).
邢东. 生物质燃气热处理木材品质与微观力学性能研究.博士学位论文, 东北林业大学, 2016.
44 Javed M A, Kekkonen P M, Ahola S, et al. Holzforschung, 2015, 69(7), 899.
45 Metsä-Kortelainen S, Antikainen T, Viitaniemi P. Holz als Roh-und Werkstoff, 2006, 64(3), 192.
46 Almeida G, Brito J O, Perré P. Holzforschung, 2009, 63(1), 80.
47 Kekkonen P M, Ylisassi A, Telkki V V. The Journal of Physical Chemistry C, 2014, 118(4), 2146.
48 Viitaniemi P, Jämsä S. Puun modifiointi lämpökäsittelyllä (Modification of wood with heat treatment), VTT Publications, Finland, 1996, pp.57.
49 Pétrissans M, Gérardin P, Bakali I E, et al. Holzforschung, 2003, 57(3), 301.
50 Hakkou M, Pétrissans M, Zoulalian A, et al. Polymer Degradation & Stability, 2005, 89(1), 1.
51 Hakkou M, Pétrissans M, Bakali I E, et al. Holzforschung, 2005, 59(1), 35.
52 Verena K, Samuel A, Ueli C, et al. Bauphysik, 2011, 33(6), 374.
53 Ahmed S A, Morén T. Wood and Fiber Science, 2012, 44(1), 85.
54 Kymäläinen M, Havimo M, Louhelainen J. Wood Material Science & Engineering, 2014, 9(3), 170.
55 Wang W. The Properties and characterization of thermally-modified wood in a combination with water repellent treatment. Ph.D. Thesis, Beijing Forestry University, China, 2015 (in Chinese).
王望. 防水剂/高温热处理复合改性木材的性能与表征.博士学位论文, 北京林业大学, 2015.
56 Pfriem A. Drvna Industrija, 2011, 62(4), 311.
57 Gao Y, Xu K, Peng H, et al. Applied Sciences, 2018, 9(1), 78.
58 Cao Y J. Properties and control theory for strength loss of steam heat-treatment wood. Ph.D. Thesis, Chinese Academy of Forestry, China, 2008 (in Chinese).
曹永建. 蒸汽介质热处理木材性质及其强度损失控制原理.博士学位论文, 中国林业科学研究院, 2008.
59 Cai S X, Wang X Z, Li Y J. Journal of Southwest Forestry University, 2019, 39(1), 166 (in Chinese).
蔡绍祥, 王新洲, 李延军.西南林业大学学报, 2019, 39(1), 166.
60 Fu Z Y, Zhou F, Gao X, et al. China Wood Industry, 2019, 33(6), 47 (in Chinese).
付宗营, 周凡, 高鑫, 等. 木材工业, 2019, 33(6), 47.
61 Huang R F, Lyu J X, Cao Y J, et al. Journal of Beijing Forestry University, 2010, 32(3), 155 (in Chinese).
黄荣凤, 吕建雄, 曹永建, 等. 北京林业大学学报, 2010, 32(3), 155.
62 Li J. Wood science (3rd Edition), Science Press, China, 2014, pp. 96 (in Chinese).
李坚.木材科学(第3版), 科学出版社, 2014, pp.96.
63 Wang Z. Study on Properties and Mechanism of Larch Wood Modifiedby Vacuum Heat Treatment. Ph.D. Thesis, Beijing Forestry University, China, 2017 (in Chinese).
王喆. 真空热处理落叶松材性变化规律及其机理研究.博士学位论文, 北京林业大学, 2017.
64 Nuopponen M, Vuorinen T, Jamsa S, et al. Journal of Wood Chemistry & Technology, 2004, 24(1), 13.
65 Tjeerdsma B F, Militz H. Holz als Roh- und Werkstoff, 2005, 63(2), 102.
66 Pizzi A, Stephanou A, Boonstra M J, et al. Holzforschung-International Journal of the Biology, Chemistry, Physics and Technology of Wood, 1994, 48(s1), 91.
67 Boonstra M J, Acker J V, Tjeerdsma B F, et al. Annals of Forest Science, 2007, 64(7), 679.
68 Jiang J H. Studies on the mechanism and properties of superheated steam heat-treated oak wood. Ph.D. Thesis, Chinese Academy of Forestry, China, 2013 (in Chinese).
江京辉. 过热蒸汽处理柞木性质变化规律及机理研究.博士学位论文, 中国林业科学研究院, 2013.
69 Kollmann F, Schneider A. Holz als Roh-und Werkstoff, 1963, 21, 77.
20100270-770 Nikolov S, Encev E. Nauc Trud Lesoteh, 1967, 14(3), 71.
71 D'Jakonov K, Konepleva T. Arhangel'sk, 1967, 10(1), 112.
72 Li M Y. Effects of steam heat treatment on the main chemical components and their structure of teak wood. Masters Thesis, Chinese Academy of Forestry, China, 2015 (in Chinese).
李明玉. 热处理对柚木木材主要化学组分及其结构的影响.硕士学位论文, 中国林业科学研究院, 2015.
73 Cai S X, Li K, Qin S S, et al. Journal of Southwest Forestry University, 2018, 38(1), 223 (in Chinese).
蔡绍祥, 李康, 秦韶山, 等.西南林业大学学报, 2018, 38(1), 223.
74 Sikora A, Kacˇík F, Gaff M, et al. Journal of Wood Science, 2018, 64(4), 406.
75 Shimizu K, Teratani F, Hashi M, et al. Mokuzai Gakkaishi, 1972, 18(2), 79.
76 Zaman A, Alén R, Kotilainen R. Wood & Fiber Science, 2000, 32(2), 138.
77 Bekhta P, Niemz P. Holzforschung, 2003, 57(5), 539.
78 Gündüz G, Korkut S, Korkut D S. Bioresource Technology, 2008, 99(7), 2275.
79 Garcia R A, Carvalho A M D, Latorraca J, et al. Wood Science & Technology, 2012, 46(1-3), 41.
80 Phuong L X, Takayama M, Shida S, et al. Holzforschung, 2007, 61(5), 488.
81 Phuong L X, Shida S, Saito Y, et al. Wood Preservation, 2006, 32(1), 7.
82 Guo J, Song K, Salmén L, et al. Carbohydrate Polymers, 2015, 115, 207.
83 Everett D H. Pure and Applied Chemistry, 1972, 31(4), 577.
84 Sing K S W. Pure and Applied Chemistry, 1985, 57(4), 603.
85 Rouquerol J, Avnir D, Fairbridge C W, et al. Pure and Applied Chemistry, 1994, 66, 1739.
86 Wang Z, Wang X M. Scientia Silvae Sinicae, 2014, 50(10), 123 (in Chinese).
王哲, 王喜明.林业科学, 2014, 50(10), 123.
87 Yin J, Song K, Lu Y, et al. Wood Science & Technology, 2015, 49(5), 987.
88 Kojiro K, Miki T, Sugimoto H, et al. Journal of Wood Science, 2010, 56(2), 107.
89 Östlund Å, Köhnke T, Nordstierna L, et al. Cellulose, 2010, 17(2), 321.
90 Singh A P, Singh T, Rickard C L. Micron, 2010, 41(3), 263.
91 Grigsby W J, Kroese H, Dunningham E A. Wood Science & Technology, 2013, 47(4), 737.
92 Peng L M, Wang D, Fu F, et al. Wood Research, 2015, 60(6), 857.
93 Junghans K, Niemz P, Bächle F. European Journal of Wood and Wood Products, 2005, 63(3), 243.
94 Windeisen E, Strobel C, Wegener G. Wood Science and Technology, 2007, 41(6), 523.
95 Olek W, Bonarski J T. Holzforschung, 2014, 68(6), 721.
96 Pfriem A, Zauer M, Wagenführ A. Holzforschung, 2009, 63(1), 94.
97 Zauer M, Pfriem A, Wagenführ A. Wood Science and Technology, 2013, 47(6), 1197.
98 Zauer M, Kretzschmar J, Groβmann L, et al. Wood Science and Technology, 2014, 48(1), 177.
99 Zauer M, Hempel S, Pfriem A, et al. Wood Science and Technology, 2014, 48(6), 1229.
100 Zauer M, Meissner F, Plagge R, et al. Holzforschung, 2015, 70(2), 137.
101 Rautkari L, Curling S, Jalaludin Z, et al. Journal of Materials Science, 2013, 48(18), 6352.
102 Stamm A J. Industrial & Engineering Chemistry, 1956, 48(3), 413.
103 Tjeerdsma B F, Boonstra M, Pizzi A, et al. Holz als Roh-und Werkstoff, 1998, 56(3), 149.
104 Fengel D, Wegener G. Wood: chemistry, ultrastructure, reactions, Walter de Gruyter, Berlin, 1989, pp.613.
105 Awoyemi L, Jones I P. Wood Science & Technology, 2011, 45(2), 261.
106 Kocaefe D, Poncsak S, Doré G, et al. Holz als Roh-und Werkstoff, 2008, 66(5), 355.
107 Yue K, Song X, Jiao X, et al. Wood and Fiber Science: Journal of the Society of Wood Science and Technology, 2020, 52(2), 152.
108 Yue K, Song X L, Jiao X K, et al. Scientia Silvae Sinicae, 2020, 56(4), 131(in Chinese).
岳孔, 宋旭磊, 焦学凯, 等. 林业科学, 2020, 56(4), 131.
109 Wang M L, Shi L, Sun Z B, et al. China Wood-Based Panels, 2020, 27(12), 18(in Chinese).
王梦蕾, 石林, 孙照斌, 等. 中国人造板, 2020, 27(12), 18.