热处理工艺对铝硅合金显微组织和性能影响的研究现状

doi:10.11896/cldb.20080038

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (7488KB)
Export: BibTeX | EndNote (RIS)

Abstract Al-Si alloy is widely used in the fields of automobile and aircraft structural parts, electronic product packaging, precision instrument processing and so on, because of its good casting performance, high specific strength and low coefficient of thermal expansion. Its various applications in various fields are due to the influence of thermal history on its microstructure, resulting in the corresponding performance bias.
At the same time, the heat treatment process also has a significant impact on the properties of Al-Si alloy. A large number of studies show that this impact is mainly achieved by changing the morphology and size of eutectic silicon and primary silicon, or changing the precipitating of alloying elements and so on, and these changes are also reflected when the alloy compositions and preparation processes changed. In fact, the effect of different heat treatment methods on the properties of Al-Si alloy with different microstructure is also varied.
The precipitation after heat treatment has a great influence on the hardness of Al-Si alloy, and its distribution is related to the toughness of Al-Si alloy; the spheroidization of silicon phase after heat treatment can improve the strength and wear resistance of Al-Si alloy. But the increase of the size of silicon phase will lead to the decrease of wear resistance of the alloy. The changes of microstructure and properties of Al-Si alloy are corresponding to each other. By exploring and summarizing the microstructure evolutions of Al-Si alloy after heat treatment, the change of its properties can be predicted qualitatively.
In this paper, the influence trends of heat treatment on hardness, strength and toughness, tribological properties and thermophysical properties of various Al-Si alloys are reviewed. It is consistent with the microstructure evolutions of T1, T4, T5, T6, annealing and other heat treatment processes, so as to analyze the influence mechanism. At the same time, the above properties of Al-Si alloy after heat treatment were classified, summarized and compared in order to facilitate the selection of different heat treatment processes according to different performance requirements.

Key words： Al-Si alloy heat treatment microstructure evolution hardness strength and toughness tribological property thermophysical property

Published: Online: 2022-06-09

CLC number:

TG166.3

Fund:Key Fund Project of Equipment Pre-research(61409230607).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Wentao
	HE Pengfei
	LIU Ming
	ZHOU Yongxin
	WANG Haidou
	BAI Yu
	LI Qing

Cite this article:

YANG Wentao,HE Pengfei,LIU Ming, et al. Review of Effect of Heat Treatment on Microstructure and Properties of Al-Si Alloy[J]. Materials Reports, 2022, 36(11): 20080038-9.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20080038 OR http://www.mater-rep.com/EN/Y2022/V36/I11/20080038

1 Miller W S, Zhuang L, Bottema J, et al. Materials Science & Engineering A (Structural Materials: Properties, Microstructure and Processing), 2000, 280(1),37.
2 Samuel A M, Garza-Elizondo G H, Doty H W, et al. Materials & Design, 2015, 80,99.
3 Reyes R V, Bello T S, Kakitani R, et al. Materials Science and Engineering: A, 2017, 685,235.
4 Kang N, Coddet P, Ammar M R, et al. Materials Characterization, 2017, 130,243.
5 Rajaram G, Kumaran S, Rao T S. Tribology Transactions, 2010, 54(1),115.
6 Beijing General Research Institute of Mining & Metallurgy. China metallurgical encyclopedia, Metallurgical Industry Press, China,2001,pp.83 (in Chinese).
北京太冶研究总院.中国冶金百科全书,冶金工业出版社,2001,pp.83.
7 Li H D. Dictionary of modern material science and engineering, Shandong science and Technology Press, China,2001,pp.106 (in Chinese).
李恒德. 现代材料科学与工程辞典, 山东科学技术出版社, 2001,pp.106.
8 Sjölander E, Seifeddine S. Journal of Materials Processing Technology, 2010, 210(10),1249.
9 Moustafa M A, Samuel F H, Doty H W. Journal of Materials Science, 2003, 38(22),4507.
10 Crowell N, Shivkumar S. AFS Trans, 1995, 107(8),721.
11 Parker B A, Saunders D S, Griffiths J R. Metals Forum,1982,5(1),48.
12 Rometsch P A, Arnberg L, Zhang D L. International Journal of Cast Metals Research, 1999, 12(1),1.
13 Lumely R N, Schaffer G B. Metal Powder Report,1997,52(7),17.
14 Farkoosh A R, Javidani M, Hoseini M, et al. Journal of Alloys and Compounds, 2013, 551,596.
15 Sokolowski J G, Sun X C, Byczynski G, et al. Journal of Materials Processing Technology, 1995, 53(1-2),385.
16 Gupta M, Ling S. Journal of Alloys & Compounds, 1999, 287(1-2), 1.
17 Kasprzak W, Kurita H, Birsan G, et al. Materials & Design, 2016,73(3),365.
18 Guinier A. Solid State Physics, 1959, 9(48),293.
19 Lumley R N, Polmear I J, Curtis P R. Metallurgical and Materials Tran-sactions A, 2009, 40(7),1716.
20 Wang H, Yu F X, Sun Z G. Foundry, 2007, 56(1),65 (in Chinese).
王话, 于福晓, 孙振国. 铸造, 2007, 56(1),65.
21 Xie L C, Peng C Q, Wang R C, et al. Chinese Journal of Non-ferrous Metals,2014,24(1),130 (in Chinese).
解立川,彭超群,王日初,等. 中国有色金属学报,2014,24(1),130.
22 Xie Z D, Shen J, Sun J F, et al. Powder Metallurgy Technology, 2002(4), 205 (in Chinese).
谢壮德,沈军,孙剑飞,等. 粉末冶金技术,2002(4),205.
23 Wang A Q, Xie J P, Wang W Y, et al. Journal of Material Heat Treatment, 2013 (1), 86 (in Chinese).
王爱琴, 谢敬佩, 王文焱,等. 材料热处理学报, 2013(1),86.
24 Ritchie R O. Nature Materials, 2011, 10(11),817.
25 Yu W, Zhao H, Wang L, et al. Journal of Alloys & Compounds, 2018, 73(1),444.
26 Yin D, Xiao Q, Chen Y, et al. Materials & Design, 2016, 9(5),329.
27 Cao F, Jia Y, Prashanth K G, et al. Materials & Design,2015,7(4),150.
28 Hong S J, Suryanarayana C. Metallurgical & Materials Transactions A, 2005, 36(13),715.
29 Hu Z P, Jiang J, Liao F J, et al. Journal of Materials Research, 2018, 32 (10), 25 (in Chinese).
胡钟鹏, 江峻, 廖福锦,等. 材料研究学报, 2018, 32(10),25.
30 Cai Z Y, Wang R C, Zhang C, et al. Chinese Journal of Non Ferrous Metals, 2015,25(3), 618 (in Chinese).
蔡志勇,王日初,张纯,等. 中国有色金属学报,2015,25(3),618.
31 Baik K, Seok H, Kim H, et al. Journal of Materials Research, 2005, 20(8),2038.
32 Cai Z Y, Zhang C, Wang R C, et al. Progress in Natural Science: Materials International,2016,26(4),391.
33 Varga B, Fazakas E, Hargitai H, et al. Journal of Physics Conference, 2009, 144(1),012105.
34 Gomes L F, Spinelli J E, Bogno A A, et al. Journal of Alloys & Compounds, 2019, 37(6),18.
35 Prashanth K G, Scudino S, Klauss H J, et al. Materials ence and Engineering, 2014, 590(3),153.
36 Pan Ma, Konda Prashanth, Sergio Scudino, et al. Metals,2014,4(1),74.
37 Lumley R N, O'Donnell R G, Gunasegaram D R, et al. Metallurgical & Materials Transactions A, 2007, 38(10),2564.
38 Wu W J, Wang A Q, Xie J P, et al. Journal of Material Heat Treatment, 2015(4), 60 (in Chinese).
吴文杰, 王爱琴, 谢敬佩,等. 材料热处理学报, 2015(4),60.
39 Xu C L, Yang Y F, Wang H Y, et al. Journal of Materials Science, 2007, 42(15),6331.
40 Ogris E, Wahlen A, Lüchinger H, et al. Journal of Light Metals, 2002, 2(4),263.
41 Sawla S, Das S. Wear, 2004, 257(5),555.
42 Ganiger B, Chandrashekharaiah T M, Prasad T B, et al. Materials Today Proceedings, 2018, 5(11),25165.
43 Elmadagli M, Perry T, Alpas A T. Wear, 2007, 262(1-2),79.
44 Prashanth K G, Debalina B, Wang Z, et al. Journal of Materials Research, 2014, 29(17),2044.
45 Hatch J E. American Society for Metals,1984,pp.195.
46 Tritt T M. Thermal Conductivity: Theory, 2004, 38 (7),67.
47 Lumley R N, Polmear I J, Groot H, et al. Scripta Materialia, 2008, 58(11),1006.
48 Choi S W, Cho H S, Kang C S, et al. Journal of Alloys and Compounds,2015,66(24),647.
49 Abis S, Massazza M, Mengucci P, et al. Scripta Materialia, 2001, 45(6),685.
50 Jia Y D, Ma P, Prashanth K G, et al. Journal of Alloys & Compounds, 2017, 69(9),548.