Materials Reports 2022, Vol. 36 Issue (Z1): 22030131-4 |
METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Status and Prospect of Self-lubricating Spherical Plain Bearing Testing Machine of China |
WANG Huipeng1,2, LI Peng1, JIANG Cong1, ZHU Xinggao3, ZHAO Yuncai1
|
1 School of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, Jiangxi, China 2 National United Engineering Laboratory for Advanced Bearing Tribology, Henan University of Science and Technology, Luoyang 471023, Henan, China 3 China Aerospace Standardization Institute, Beijing 100071, China |
|
|
Abstract Self-lubricatingspherical plain bearings are key components of mining machinery, marine machinery, military equipment and aerospace equipment, and their performance plays important role in service life and service safety of the equipment. Experimental test is the basic method for performance testing of self-lubricating spherical plain bearings, while self-lubricating spherical plain bearing testing machine is the basic platform and important carrier. However, the research foundation at home of self-lubricating spherical plain bearing testing machine is rather weak due to the late start and technical blockade. Therefore, this paper introduces the system component of the self-lubricating spherical plain bearing testing machine, summarizes the basic types and technical characteristics of domestic self-lubricating spherical plain bearing testing machine, and forecasts the development direction of the self-lubricating spherical plain bearing testing machine.
|
Published: 05 June 2022
Online: 2022-06-08
|
|
Fund:Pre-Research Program in the National 14th Five-Year Plan (80923010401) and the Project of National United Engineering Laboratory for Advanced Bearing Tribology (202110). |
|
|
1 郭宝霞. 中国标准导报, 2003(7), 44. 2 刘维民. 空间润滑材料与技术手册, 科学出版社, 2009, pp. 10. 3 韩翠红, 石佳东, 刘云帆, 等. 材料导报, 2021, 35(5), 5166. 4 袁军亚, 杨明明, 李佩隆, 等. 摩擦学学报, 2021, 41(2), 280. 5 吕新圃, 白金石. 轴承, 1997(3), 29. 6 房议, 赵伟桦, 许冬冬, 等.轴承, 2022(1), 53. 7 王力. 一种多功能试验机的设计及其振动性能研究. 硕士学位论文, 燕山大学, 2018. 8 洪富岳, 王云, 陈民生, 等.轴承, 1997(9), 24. 9 胡宏伟. 关节轴承试验机机身的有限元分析与优化设计. 硕士学位论文, 燕山大学, 2016. 10 洪富岳, 蒋志雄, 狄葆章, 等.轴承, 1997(12), 31. 11 Zarco-Gonzalez J C, Fellows N A, Durodola J F. Review of Scientific Instruments, 2003, 74(9), 4194. 12 迟成芳, 尹廷林, 尹芳芳, 等.工程与试验, 2008,48(3), 72. 13 柴苍修, 王新峰.试验技术与试验机, 1990(6), 13. 14 云峰, 麻小宁, 王慧.工程与试验, 2017, 57(1), 79. 15 马华静. 关节轴承试验机研制及磨损量检测系统热误差补偿. 硕士学位论文, 燕山大学, 2017. 16 黄磊. 关节轴承衬垫试验机的局部加热技术研究. 硕士学位论文, 燕山大学, 2016. 17 王礼飞. 基于红外测温方法的关节轴承摩擦温度场研究. 硕士学位论文, 合肥工业大学, 2015. 18 王东峰, 杨浩亮, 尹延经, 等. 中国专利,CN106438739B,2019. 19 Rezaei A, Paepegem W V , Baets P D, et al. Wear, 2012, 296(1-2), 660. 20 李巍, 胡占齐, 杨育林, 等.光学精密工程, 2016, 24(4), 844. 21 苏家磊. 低速重载工况下径向自润滑关节轴承寿命预测. 硕士学位论文, 燕山大学, 2016. 22 Jeon H G, Cho D H, Yoo J H. Tribology Transactions, 2018, 61(5), 808. 23 Jeon H G, Yoo J H, Lee Y Z. Tribology Transactions, 2019, 62(3), 419. 24 宋云峰, 郭强, 罗唯力.理化检验(物理分册), 2001, 37(7), 288. 25 胡占齐, 李巍, 杨育林, 等.轴承, 2015(11), 57. 26 姜韶峰,杨威启,庄汀生.轴承, 1996(6), 30. 27 王国锋. 复合摆动式关节轴承性能试验机的研制及试验研究. 硕士学位论文, 河南科技大学, 2011. 28 邸世勇. 一种关节轴承试验机设计与重要零部件结构优化. 硕士学位论文, 燕山大学, 2014. 29 任亚军, 邸世勇.机械设计与制造工程, 2019, 48(6), 60. 30 李正国. 复合摆动式关节轴承加速寿命试验机的研制及试验研究. 硕士学位论文, 河南科技大学, 2014. 31 卢建军, 邱明, 李迎春.机械传动, 2016, 40(10), 105. 32 吴先航, 韩先国, 白萌.现代制造技术与装备, 2018(5), 64. 33 孙博. 某型尾旋翼轴承试验机研制及摆动系统动态分析. 硕士学位论文, 燕山大学, 2016. 34 王芳. 尾旋翼关节轴承试验机的研制及动态特性分析. 硕士学位论文, 燕山大学, 2017. 35 魏立保, 黄世军, 杨育林.直升机技术, 2008(2), 35. |
|
|
|