Mg-Sm系镁合金的研究进展

doi:10.11896/cldb.20070180

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2322KB)
Export: BibTeX | EndNote (RIS)

Abstract As the lightest metal structural material, magnesium alloy has good application prospects, but its strength and plasticity are lower than that of aluminum alloy, which limits the application of magnesium alloy. The alloying is an effective means to improve the strength and promote the microstructures of magnesium alloy. Many magnesium alloy products, such as commercial ZK system and AZ system, which have extended the application of the range of magnesium alloy. However, the strength of the commercial ZK system and AZ system are lower than that of the aluminum alloy, and thermostability is poor. Sm has good solution strengthening and aging hardening for magnesium alloy due to the high solid solubility of Sm in Mg at elevated temperature and it decreases with the decreasing temperature. Addition some alloying elements to the Mg-Sm alloys, such as Gd, Y, Nd, Zn, Al and Ca, could enhance the plasticity and the room temperature and elevated temperature strength of Mg-Sm system alloys. Researchers have conducted a lot of study on the mechanical properties, aging process, aging precipitates, crystallographic characteristics of aging precipitates and mechanical properties of Mg-Sm system alloys.
Based on the summary of the research results of Mg-Sm based-alloys, this paper systematically introduces the microstructures and mechanical properties of Mg-Sm-Gd, Mg-Sm-Y, Mg-Sm-Nd, Mg-Sm-Zn, Mg-Sm-Al, and Mg-Sm-Ca system alloys under different heat treatment state and forming process, and summarizes the effect of alloying on the microstructures and mechanical properties of Mg-Sm system alloys, and research progress on aging precipitation of the system alloys. Meanwhile, a few critical scientific problems of the current research are pointed out and future research is prospected.

Key words： Mg-Sm system alloys microstructure aging precipitation mechanical property

Published: Online: 2022-04-07

CLC number:

TG146.2+2

Fund:National Natural Science Foundation of China (51571084), Central Plains Talent Program-Central Plains Youth Top Talents ([2021]44) and Natural Science Foundation of Henan Province (222300420435).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Laidong
	LI Quan'an
	CHEN Xiaoya
	YAN Lipeng

Cite this article:

YANG Laidong,LI Quan'an,CHEN Xiaoya, et al. Recent Advance of Mg-Sm System Alloys[J]. Materials Reports, 2022, 36(7): 20070180-9.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20070180 OR http://www.mater-rep.com/EN/Y2022/V36/I7/20070180

1 Ding W J, Fu P H, Peng L M, et al. Spacecaft Engineering, 2011, 28(2), 103(in Chinese).
丁文江,付彭怀,彭立明,等.航天器环境工程, 2011, 28(2), 103.
2 Zhao D, Dong G, Zhao B. Nonferrous Merals Engineering, 2015, 5(2), 23(in Chinese).
赵怿,董刚,赵博.有色金属工程, 2015, 5(2), 23.
3 Li W X. Magnesium and magnesium alloy, Central South University Press, China, 2005(in Chinese).
黎文献.镁及镁合金,中南大学出版社, 2005.
4 Ostapovets Andriy, Serra Anna. Journal of Materials Science, 2017, 52(1),533.
5 Chen Z H. Magnesium alloys, Chemical Industry Press, China, 2004,pp.19(in Chinese).
陈振华.镁合金,化学工业出版社, 2004,pp.19.
6 Yang L X, Xiao L, Zhou H T, et al. Aerospace Shanghai, 2019, 36(2), 38(in Chinese).
杨力祥,肖旅,周海涛,等.上海航天, 2019, 36(2), 38.
7 Zhang J H, Liu S J, Wu R Z, et al. Journal of Magnesium and Alloys, 2018, 6(3), 277.
8 Rokhlin L L. Magnesium alloys containing rare earth metals, Taylor & Francis Company Limited, UK, 2003,pp.37.
9 Saccone A, Delfino S, Borzone G, et al. Journal of the Less Common Metals, 1989, 154(1), 47.
10 Liu C M, Zhu X R, Zhou H T. The phase diagrams of magnesium alloys, Central South University Press, 2006,pp.51(in Chinese).
刘楚明,朱秀荣,周海涛.镁合金相图集,中南大学出版社, 2006,pp.51.
11 Masahiko Nishijima, Kenji Hiraga, Michiaki Yamasaki, et al. Materials Transactions, 2009, 50(7), 1747.
12 Li B B, Dong J, Zhang Z Y, et al. Materials & Design, 2017, 116, 419.
13 Zhang Z Y. Study on the microstructure, mechanical properties and precipitated phase transformations of Mg(-Gd)-Sm-Zr alloys. Ph.D. Thesis, Shanghai Jiao Tong University, China, 2009(in Chinese).
章桢彦.Mg(-Gd)-Sm-Zr合金的微观组织、力学性能和析出相变研究.博士学位论文, 上海交通大学, 2009.
14 Liu N Y. Study on precipitates and phase transformation mechanism of Mg-Sm-Gd system alloys. Master's Thesis, Shanghai Jiao Tong University, China, 2015(in Chinese).
刘宁远. Mg-Sm-Gd系合金时效析出相及相变机理研究.硕士学位论文,上海交通大学, 2015.
15 Xie H B, Liu B S, Bai J Y, et al. Journal of Alloys and Compounds, 2020, 814, 152320.
16 Zhu B B, Sun Y S, Jia D, et al. Journal of Southeast University (Natural Science Edition), 2009, 39(3), 610(in Chinese).
朱蓓蓓,孙扬善,贾迪,等.东南大学学报(自然科学版), 2009, 39(3), 610.
17 Guo C P, Du Z M, Li C R. Calphad-Computer Coupling of Phase Diagrams and Thermochemistry, 2010, 34(1), 90.
18 Zhang Z Y, Peng L M, Zeng X Q, et al. Materials Characterization, 2009, 60(6),555.
19 Zhao Y, Wang Q D, Gu J H, et al. Materials Science Forum, 2007, 62(1095), 159.
20 Zhu L M, Li Q A, Zhou Y, et al. Rare Metal Materials and Engineering, 2019, 48(1), 171(in Chinese).
朱利敏,李全安,周耀,等.稀有金属材料与工程, 2019, 48(1), 171.
21 Fu S L. Study on the microstructure and mechanical properties of Mg-Gd(-Y-Sm-Zr) heat resistant magnesium alloys. Ph.D. Thesis, Xi'an University of Technology, China, 2016(in Chinese).
付三玲.Mg-Gd(-Y-Sm-Zr)耐热镁合金组织和性能研究.博士学位论文,西安理工大学, 2016.
22 Gao X, He S M, Zeng X Q, et al. Materials Science and Engineering A, 2006, 431(1), 322.
23 Liu N Y, Zhang Z Y, Peng L M, et al. Materials Science and Enginee-ring A, 2015, 627, 223.
24 Fu S L, Li Q A, Jing X T. Transactions of Materials and Heat Treatment, 2016, 37(8), 41(in Chinese).
付三玲,李全安,井晓天.材料热处理学报, 2016, 37(8), 41.
25 Chen Z, Li Q A, Liu W J, et al. Heat Treatment of Metals, 2013, 38(9), 71(in Chinese).
陈志,李全安,刘文建,等.金属热处理, 2013, 38(9), 71.
26 Zhu Y, Li Q A, Fu S L, et al. Foundry, 2017, 66(2), 178(in Chinese).
周耀,李全安,付三玲,等.铸造, 2017, 66(2), 178.
27 Yuan M, Zheng Z Q. Metallography, Microstructure, and Analysis, 2014, 3(2), 131.
28 Chen Z. Effect of Y on microstructures and properties of Mg-Gd-Y-Sm-Zr alloys. Master's Thesis, Henan Univeristy of Science and Technology, China, 2014(in Chinese).
陈志.Y含量对Mg-Gd-Y-Sm-Zr合金组织和性能的影响.硕士学位论文,河南科技大学, 2014.
29 Yuan M. Study on the microstructure and mechanical properties of Mg-Sm-Gd-Zn-Zr alloy. Ph.D. Thesis, Central South University, China, 2014(in Chinese).
袁明.Mg-Sm-Gd-Zn-Zr系镁合金的组织与性能研究.博士学位论文,中南大学, 2014.
30 Li D Q, Wang Q D, Ding W J. Journal of Materials Science, 2009, 44(12), 3049.
31 Li D Q. Study on the microstructure and mechanical properties of Mg-Y-Sm-Zr alloys. Ph.D. Thesis,Shanghai Jiao Tong University, China, 2008(in Chinese).
李大全.Mg-Y-Sm-Zr系镁合金组织性能研究.博士学位论文,上海交通大学, 2008.
32 Li D Q, Wang Q D, Ding W J. Materials Science and Engineering A, 2006, 428(1-2), 295.
33 Zhang Q, Li Q A, Jing X T, et al. Journal of Rare Earths, 2010, 28(1), 375.
34 Li Z T, Li Q A, Chen X Y. Transactions of Materials and Heat Treatment, 2019, 40(12), 25(in Chinese).
李志涛,李全安,陈晓亚.材料热处理学报, 2019, 40(12), 25.
35 Kang H J. Effect of Gd on microstructures and properties of Mg-Gd-Y-Sm-Zr alloys. Master's Thesis, Henan Univeristy of Science and Technology, China, 2013(in Chinese).
亢海娟.Gd含量对Mg-Gd-Y-Sm-Zr合金组织和性能的影响.硕士学位论文,河南科技大学, 2013.
36 Zhang H. Effect of Zn content on microstructure and properties of Mg-Y-Sm-Zr alloy. Master's Thesis, North University of China, China, 2019(in Chinese).
张航.Zn含量对Mg-Y-Sm-Zr合金组织和性能的影响.硕士学位论文,中北大学, 2019.
37 Lyu S Y, Xiao W L, Li G D, et al. Materials Science and Engineering A, 2019, 746, 179.
38 Lyu S Y, Xiao W L, Li G D, et al. Journal of Alloys and Compounds, 2020, 821,153477.
39 Zhang Q. Microstructure and mechanical properties of heat resistant magnesium alloys with yttrium. Ph.D. Thesis, Xi'an University of Technology, China, 2012(in Chinese).
张清.含钇耐热镁合金的组织性能研究.博士学位论文,西安理工大学, 2012.
40 Qi Y, Li Q A, Chen X Y, et al. Transactions of Materials and Heat Treatment, 2020, 41(3), 34(in Chinese).
戚尧,李全安,陈晓亚,等.材料热处理学报, 2020, 41(3), 34.
41 Zhao S C. Study on the microstructural evolution and mechanical properties of Mg-Nd-Sm-Zn-Zr alloys. Ph.D. Thesis, Harbin University of Science and Technology, China, 2017(in Chinese).
赵思聪. Mg-Nd-Sm-Zn-Zr合金微观组织演变及力学性能研究.博士学位论文,哈尔滨理工大学, 2017.
42 Che C J, Cheng L R, Tong L B, et al. Journal of Alloys and Compounds, 2017, 706, 526.
43 Cao G J, Zhu N, Zhao S C, et al. Materials Letters, 2019, 246, 117.
44 Guan K, Li B S, Yang Q, et al. Journal of Alloys and Compounds, 2018, 735, 1737.
45 Zhang T T, Cui H W, Cui X L, et al. Materials Research Express, 2019, 6(7), 76550.
46 Zhang T T, Cui H W, Cui X L, et al. Journal of Alloys and Compounds, 2019, 784, 1130.
47 Zheng J, Wang Q D, Jin Z L, et al. Materials Science and Engineering A, 2010, 527(7-8), 1677.
48 Guan K, Meng F Z, Qin P F, et al. Journal of Materials Science and Technology, 2019, 35(7), 1368.
49 Huang X F, Zhang Y, Guo F, et al. China Foundry,2018,15(2),103.
50 Che C J, Cai Z Y, Cheng L R, et al. Metals, 2017, 7, 281.
51 Chen S Q, Song X H, Chen L. Chinese Rare Earths, 2017, 38(1), 108(in Chinese).
陈胜迁,宋新华,陈立.稀土, 2017, 38(1), 108.
52 Zhang D D, Yang Q, Li B S, et al. Journal of Alloys and Compounds, 2019, 805, 811.
53 Sun R X, Liu Y F, Wang R H, et al. Hot Working Technology, 2018, 47(20), 222(in Chinese).
孙瑞霞,刘义付,王瑞红,等.热加工工艺, 2018, 47(20), 222.
54 Guo R H, Li Z L, Li H Q, et al. Journal of Materials Engineering, 2018, 46(11), 125(in Chinese).
郭瑞华,李振亮,李慧琴,等.材料工程, 2018, 46(11), 125.
55 Zhang Y, Huang X F, Ma Z D, et al. The Chinese Journal of Nonferrous Metals, 2017, 27(10), 1961(in Chinese).
张玉,黄晓锋,马振铎,等.中国有色金属学报, 2017, 27(10), 1961.
56 Zhang S Q, Hu L F, Jiang L Y, et al. Shanghai Metals, 2018, 40(5), 71(in Chinese).
张书强,胡玲飞,姜廉瑜,等.上海金属, 2018, 40(5), 71.
57 Wang C L, Dai J C, Liu W C, et al. Journal of Alloys and Compounds, 2015, 620, 172.
58 Zheng Y, Cai Z Y,Cheng L R. Materials Reports B:Research Papers, 2019, 33(8), 1354(in Chinese).
郑嫄,蔡中义,程丽任,等.材料导报:研究篇, 2019, 33(8), 1354.
59 Huang Z H, Qi W J, Xu J, et al. Chinese Journal of Rare Metals, 2017, 41(11), 1173(in Chinese).
黄正华,戚文军,徐静,等.稀有金属, 2017, 41(11), 1173.
60 Hu Z, Hua Q, Yan H, et al. Rare Metal Materials and Engineering, 2016, 45(9), 2275.
61 Wang J L, Wang L D, Wu Y M, et al. Materials Science and Engineering A, 2011, 528(12), 4115.
62 Li K J, Li Q A, Jing X T, et al. Scripta Materialia, 2009, 60(12), 1101.
63 Sun M, Hu X Y, Peng L M, et al. Materials Science and Engineering A, 2015, 620, 89.
64 Hu X Y, Fu P H, David S J, et al. Journal of Alloys and Compounds, 2016, 663, 387.
65 Son H T, Lee J S, Kim D G, et al. Journal of Alloys and Compounds, 2009, 473(1-2), 446.
66 Luo X P, Fang D Q, Li Q S, et al. Journal of Rare Earths, 2016, 34(11), 1134.
67 Luo X P, Fang D Q, Chai Y S, et al. Microscopy Research and Technique, 2016, 79(8), 707.
68 Chai Y S, Gao Z G, Cai K L, et al. Rare Metal Materials and Enginee-ring, 2016, 45(2), 287.