INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
A Review on Biological Polysaccharide Derived Carbon Electrode for Supercapacitors |
LI Kaixuan, WANG Huanlei
|
School of Materials Science and Engineering,Ocean University of China, Qingdao 266100, Shandong, China |
|
|
Abstract Supercapacitors with high power density and long cycling stability have attracted extensive attention. Carbon materials with large specific surface area, porous structure and good structural stability have been considered as promising electrodes for supercapacitors. Activated carbon is the most widely used electrode for supercapacitors, but activated carbon with micropores structure usually has impeded ion transport, leading to low specific capacitance and energy density. Recently, graphene shows the advantages associated with high capacitance, fast ion and electron transport as electrode for supercapacitors. However, the easy agglomeration of graphene layers, low packing density and high cost of graphene restrict its practical application. Therefore, it is a great challenge to design low-cost and sustainable carbon electrodes with novel structure. Preparing carbon electrodes by using biological polysaccharide, such as cellulose, chitin, chitosan and starch, displays great potential advantage for achieving carbon electrode with lowcost. In recent years, by directly utilizing the natural structure and combining the structural composition with characteristics of biological polysaccharide, the carbonization-activation method, template method, and electrospinning method are utilized to control the morphology, microstructure, pore structure and composition of the biological polysaccharide derived carbons, and the resultant carbons exhibit excellent electrochemical performance for supercapacitors. It is worth to note that heteroatoms in biological polysaccharides itself can realize heteroatom-doping in carbons without complicated procedures, and heteroatoms in carbon frameworks can improve the wettability and tune the charge distribution, which is beneficial for the improvement of electrochemical performance. In this review, we summarize the research progress with respect to biological polysaccharide derived carbon electrodes for supercapacitors. The factors affecting the ability of energy storage behaviors for the carbon electrode are emphatically introduced. At the same time, based on the introduction of carbon electrode materials derived from biological polysaccharides, the biological polysaccharide derived carbon electrodes are classified based on different dimensions, and the influences of various morphological and structural characteristics of biological polysaccharide derived carbon electrodes on their electrochemical performances for supercapacitors are significantly illustrated.
|
Published: 13 January 2022
Online: 2022-01-13
|
|
Fund:This work was financially supported by the Shandong Provincial Key R & D Plan and the Public Welfare Special Program(2019GGX102038), the Fundamental Research Funds for the Central Universities (201822008, 201941010), the Qingdao City Programs for Science and Technology Plan Projects (19-6-2-77-cg) and the Shandong Provincial Natural Science Foundation (ZR2020ME038). |
|
|
[1] Dong X, Jin H, Wang R, et al. Advanced Energy Materials, 2018, 8(11), 1702695. [2] Wu F, Gao J, Zhai X, et al. Carbon, 2019, 147, 242. [3] Hou Y, Chai D, Li B, et al. ACS Applied Materials & Interfaces, 2019, 11(23), 20845. [4] Wang Q, Ma Y, Liang X, et al. Chemical Engineering Journal, 2019, 371, 145. [5] Myung Y, Jung S, Tung T T, et al. ACS Sustainable Chemistry & Engineering, 2019, 7(4), 3772. [6] Li Y, Wang H, Wang L, et al. Small, 2019, 15(9), 1804539. [7] Zhang L L,Zhao X S. Chemical Society Reviews, 2009, 38(9), 2520. [8] Liu M, Niu J, Zhang Z, et al. Nano Energy, 2018, 51, 366. [9] Selvaraj T, Perumal V, Khor S F, et al. Materials Research Bulletin, 2020, 126, 110839. [10] Huang Y, Kormakov S, He X, et al. Polymers, 2019, 11(2), 187. [11] Guo N, Luo W, Guo R, et al. Journal of Alloys and Compounds, 2020, 834, 155115. [12] Li S J, Zhang J G, Li J X, et al. Journal of Materials Engineering, 2018, 46(7), 157(in Chinese). 李诗杰, 张继刚, 李金晓,等.材料工程, 2018, 46 (7), 157. [13] Ji H, Zhao X, Qiao Z, et al. Nature Communications, 2014, 5, 3317. [14] Hulicova-Jurcakova D, Kodama M, Shiraishi S, et al. Advanced Functional Materials, 2009, 19(11), 1800. [15] Chu M, Zhai Y, Shang N, et al. Applied Surface Science, 2020, 517, 146140. [16] Portet C, Yushin G,Gogotsi Y. Journal of the Electrochemical Society, 2008, 155(7), 531. [17] Peng S S, Yang M H, Zhang W K, et al. Microporous and Mesoporous Materials, 2017, 242, 18. [18] Pei Z, Meng Q, Wei L, et al. Energy Storage Materials, 2020, 28, 55. [19] Xie Z, Shang X, Yang J, et al. Carbon, 2020, 158, 184. [20] Kasturi P R, Ramasamy H, Meyrick D, et al. Journal of Colloid and Interface Science, 2019, 554, 142. [21] Zhao G, Yu D, Zhang H, et al. Nano Energy, 2020, 67, 104219. [22] Gao F, Qu J, Zhao Z, et al. Electrochimica Acta, 2016, 190, 1134. [23] Cheng Y, Peng J, Xu H, et al. Advanced Functional Materials, 2018, 28(49), 1800924. [24] Nakamura M, Nakanishi M,Yamamoto K. Journal of Power Sources, 1996, 60(2), 225. [25] Raj C J, Rajesh M, Manikandan R, et al. Journal of Power Sources, 2018, 386, 66. [26] Huang D J, Ma Z H, Ma C Y, et al. Materials Reports B:Research Papers, 2017, 31(8), 21(in Chinese). 黄大建, 马宗红, 马晨阳, 等.材料导报:研究篇, 2017, 31(8), 21. [27] Zhao G, Chen C, Yu D, et al. Nano Energy, 2018, 47, 547. [28] Raymundo-Piero E, Kierzek K, Machnikowski J, et al. Carbon, 2006, 44(12), 2498. [29] Simon P,Gogotsi Y. Nature Materials, 2008, 7(11), 854. [30] Huang J, Sumpter B G,Meunier V. Chemistry-A European Journal, 2008, 14(22), 6614. [31] Hulicova-Jurcakova D, Seredych M, Lu G Q, et al. Advanced Functional Materials, 2009, 19(3), 438. [32] Sahoo G, Polaki S R, Ghosh S, et al. Energy Storage Materials, 2018, 14, 297. [33] Wang Y, Liu R, Tian Y, et al. Chemical Engineering Journal, 2020, 384, 123263. [34] Yu M, Wang Z, Zhang H, et al. Nano Energy, 2019, 65, 103987. [35] Liu W J, Jiang H,Yu H Q. Energy & Environmental Science, 2019, 12(6), 1751. [36] Ghosh S, Barg S, Jeong S M, et al. Advanced Energy Materials, 2020, 10(32), 2001239. [37] Tian K, Wang J, Cao L, et al. Nature Communications, 2020, 11(1), 3884. [38] Zhou J, Bao L, Wu S, et al. Carbohydrate Polymers, 2017, 173, 321. [39] Liu M C, Lu C, Xu Y, et al. ACS Sustainable Chemistry & Engineering, 2019, 7(22), 18690. [40] Xing L, Chen X, Tan Z, et al. ACS Sustainable Chemistry & Enginee-ring, 2019, 7(7), 6601. [41] Hao P, Zhao Z, Tian J, et al. Nanoscale, 2014, 6(20), 12120. [42] Chen W, Luo M, Liu C, et al. Carbohydrate Polymers, 2019, 219, 229. [43] Cheng J, Xu Q, Wang X, et al. Sustainable Energy & Fuels, 2019, 3(5), 1215. [44] Cao J, Zhu C, Aoki Y, et al. ACS Sustainable Chemistry & Engineering, 2018, 6(6), 7292. [45] Deng J, Xiong T, Xu F, et al. Green Chemistry, 2015, 17(7), 4053. [46] Deng Q, Abbas S C, Li Z, et al. Journal of Colloid and Interface Science, 2020, 574, 33. [47] You J, Li M, Ding B, et al. Advanced Materials, 2017, 29(19), 1606895. [48] Fu F, Yang D, Zhang W, et al. Chemical Engineering Journal, 2020, 392, 123721. [49] Chang B, Yin H, Zhang X, et al. Chemical Engineering Journal, 2017, 312, 191. [50] Tian W, Gao Q, Zhang L, et al. Journal of Materials Chemistry A, 2016, 4(22), 8690. [51] Deng L, Young R J, Kinloch I A, et al. ACS Applied Materials & Interfaces, 2013, 5(20), 9983. [52] Fang K, Chen M, Chen J, et al. Applied Surface Science, 2019, 475, 372. [53] Kang Y J, Chun S J, Lee S S, et al. ACS Nano, 2012, 6(7), 6400. [54] Chen L F, Huang Z H, Liang H W, et al. Energy & Environmental Science, 2013, 6(11), 3331. [55] You J, Zhu L, Wang Z, et al. Chemical Engineering Journal, 2018, 344, 498. [56] Zheng S, Cui Y, Zhang J, et al. RSC Advances, 2019, 9(19), 10976. [57] Duan B, Gao X, Yao X, et al. Nano Energy, 2016, 27, 482. [58] Long C, Qi D, Wei T, et al. Advanced Functional Materials, 2014, 24(25), 3953. [59] Chen Q, Tan X, Liu Y, et al. Journal of Materials Chemistry A, 2020, 8(12), 5773. [60] Chen H, Liu D, Shen Z, et al. Electrochimica Acta, 2015, 180, 241. [61] Wu Z S, Winter A, Chen L, et al. Advanced Materials, 2012, 24(37), 5130. [62] Wu Z S, Parvez K, Winter A, et al. Advanced Materials, 2014, 26(26), 4552. [63] Chen W, Wang X, Hashisho Z, et al. Microporous and Mesoporous Materials, 2019, 280, 57. [64] Kappe C O. Angewandte Chemie International Edition, 2004, 43(46), 6250. [65] Menéndez J A, Arenillas A, Fidalgo B, et al. Fuel Processing Technology, 2010, 91(1), 1. [66] Li X Q, Chang L, Zhao S L, et al. Acta Physico-Chimica Sinica, 2017, 33(1), 130(in Chinese). 李雪芹, 常琳, 赵慎龙, 等. 物理化学学报, 2017, 33(1), 130. [67] Liu W J, Jiang H,Yu H Q. Chemical Reviews, 2015, 115(22), 12251. [68] Li H, Zhao Y, Liu S, et al. Microporous and Mesoporous Materials, 2020, 297, 109960. [69] Li X, Guan B Y, Gao S, et al. Energy & Environmental Science, 2019, 12(2), 648. [70] Yao L, Wu Q, Zhang P, et al. Advanced Materials, 2018, 30(11), 1706054. [71] Li L, Jia C, Shao Z, et al. Chemical Engineering Journal, 2019, 370, 508. [72] Liu B, Yang M, Chen H, et al. Journal of Power Sources,2018,397,1. [73] Titirici M M, White R J, Brun N, et al. Chemical Society Reviews, 2015, 44(1), 250. [74] Wang H, Xu Z, Kohandehghan A, et al. ACS Nano, 2013, 7(6), 5131. [75] Xue Y, Zhang Q, Wang W, et al. Advanced Energy Materials, 2017, 7(19), 1602684. [76] You J, Li M, Ding B, et al. Advanced Materials, 2017, 29(19), 1606895. [77] Cao Q, Zhang Y, Chen J, et al. Industrial Crops and Products, 2020, 148, 112181. [78] Chen L F, Huang Z H, Liang H W, et al. Advanced Functional Mate-rials, 2014, 24(32), 5104. [79] Wu X, Zhang M, Song T, et al. ACS Applied Materials & Interfaces, 2020, 12(11), 13096. [80] Gao Y, Xia Y, Wan H, et al. Electrochimica Acta, 2019, 301, 294. [81] Gao L, Xiong L, Xu D, et al. ACS Applied Materials & Interfaces, 2018, 10(34), 28918. [82] Smirnov M A, Sokolova M P, Bobrova N V, et al. Journal of Energy Chemistry, 2018, 27(3), 843. |
|
|
|