液体高速冲蚀与防护涂层研究现状

Abstract
Figure/Table
References
Related Citation (4)

Download:

Full Text ( PDF ) (4959KB)
Export: BibTeX | EndNote (RIS)

Abstract This paper studies the water droplet erosion that is widely used in equipment used in energy industries such as natural gas, wind power, thermal power generation, etc.,and further reviewed the damage mechanism, influencing factors of droplet erosion and coating protection technique. Meanwhile, this article also lists the equipment used in the water drop erosion experiment, industry standards, and the detection me-thods after the erosion test. The impact of physical properties such as fracture toughness, thickness, structure, and residual stress of the coating on the water droplet erosion resistance of the enhanced material. Through these methods, the experimental results of the water drop erosion experiment can be effectively obtained to provide a positive reference for the experiment and industrial production.

Key words： gas-liquid two-phase flow water droplet erosion protective coating erosion mechanism water erosion test

Published: 09 December 2021

CLC number:	TG156.88
	TB114.2

Fund:This work was supported by National Basic Research Program of China(2018YFA0704603), the National Natural Science Foundation of China(51601029, U1508218), and the Fundamental Research Funds for the Central Universities of Ministry of Education of China(DUT19JC52).

About author:: Changlong Chen received his B.E. Degree from Shen-yang University of Technology in 2016. He is currently pursuing master degree at the School of Materials Science and Engineering, Dalian University of Technology, under the guidance of associate professor Yuge Li. His research has focused on strength and toughness of CrN_x coatings .
Yuge Li, member of the Youth Committee of the Surface Engineering Branch of the Chinese Mechanical Engineering Society, and project secretary of the National 973 Program. After receiving his Ph.D. degree from Shanghai Jiao Tong University in 2013, he joined the Surface Engineering Laboratory of Dalian University of Technology in the same year. He has been engaged in material surface engineering theory and application research for a long time, and his research interests are high power pulsed plasma technology and equipment, the strengthening and toughening mechanism of hard coatings, and the development and application of service coatings in extreme environment.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHEN Changlong
	ZHAO Yini
	LI Yuge

Cite this article:

CHEN Changlong,ZHAO Yini,LI Yuge. Research Status of Liquid Erosion and Protective Coating[J]. Materials Reports, 2021, 35(z2): 361-366.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2021/V35/Iz2/361

1 Rao J S. Mechanism and Machine Theory, 1998, 33(5), 599.
2 Heymann F J. Transaction of the ASME. 1968, 90(3), 400.
3 Lesser M. Proceedings of the Royal Society of London Series A-Mathematical Physical and Engineering Sciences, 1981, 377(1770), 289.
4 Zhou Q, Li N, Chen X, et al. International Journal of Impact Engineering, 2009, 36, 1156.
5 Field J. Wear, 1999, 233, 1.
6 Gohardani O. Progress in Aerospace Sciences, 2011, 47, 280.
7 Mohamed E I, Materials, 2020, 13, 157.
8 Najafabadi A H, Razavi R S, Moza R, et al. Metalurgicall and Materials Transactions A-Physical Metallurgy and Materials Science, 2014, 45, 2522.
9 Lee M K, Kim W W, Rhee C K, et al. Metalurgicall and Materials Transactions A-Physical Metallurgy and Materials Science, 1999, 30, 961.
10 Ma D, Harvey T J, Wellman R G, et al. Journal of Alloys and Compounds, 2019, 788, 719.
11 Tobin E F, Young T M, Raps D, et al. Wear, 2011, 271, 2625.
12 Ma D, Mostafa A, Kevorkov D, et al. Metals, 2015, 5, 1462.
13 Mahdipoor M, Tarasi F, Moreau C, et al. Wear, 2015, 330, 338.
14 Kirols H S, Mahdipoor M S, Kevorkov D, et al. Material and Design, 2016, 104, 76.
15 Oka Y I, Hayashi H. Wear, 2011, 271, 1397.
16 Luiset B, Sanchette F, Billard A, et al. Wear, 2013, 303, 459.
17 Mahdipoor M S, Kirols H S, Scientific Reports, 2015, 5, 14182.
18 Kirols H S, Kevorkov D, Uihlein A, et al. Wear, 2015, 342, 198.
19 Marzbali M, Dolatabadi A. Physics of Fluids, 2020, 32(11), 112101.
20 Fujisawa N, Takano S, Fujisawa K, et al. Wear, 2018, 398, 158.
21 Sasaki H, Ochiai N, Iga Y. International Journal of Fluid Machinery and Systems, 2016, 9, 57.
22 Xiong J, Koshizuka S, Sakai M. Journal of Nuclear Science and Technology,2012, 41, 145.
23 Saeedi R, Razavi R S, Bakhsh S R, et al. Ceramics International, 2021, 47, 4097.
24 Oka Y I, Hayashi H. Wear. 2009, 267, 1804.
25 Cortes E, Sanchez F, Domenech L, et al. Materials, 2017, 10, 1146.
26 Zhang Z Y, Zhang D, Xie Y H. Wear, 2019, 432, 202950.
27 Borawski B, Todd J, Singh J, et al.Wear, 2011,271, 2890.
28 Mahdipoor M S, Kevorkov D, Jedrzejowski P, et al. Materials and Design, 2016, 89, 1095.
29 魏荣华. 中国表面工程, 2009, 22(1), 1.
30 Hovsepian P E, Ehiasarian A P, Purandare Y P, et al. Journal of Alloys and Compounds, 2018, 746, 583.
31 Chen H, Zheng B C, Li Y G, Wu Z L, Lei M K. Thin Solid Films, 2019, 669, 377.
32 Zhang R F, Argon A S, Veprek S. Physical Review Letters, 2009, 102, 015503.
33 Yue Y, Gao Y, Hu W. Nature, 2020, 582,370.
34 Li Y G, Yuan H, Jiang Z T, Pan N, et al. Surface and Coatings Techno-logy, 2020, 385, 125387.
35 SuY L, Yao S H, Wei C S, et al. Thin Solid Films, 1998, 315, 153.
36 Knapp J A, Follstaedt D M. Journal of Materials Research, 2004, 19, 218.
37 Koehler J S. Physical Review Letters, 1970, B2, 547.
38 Misra A, Kung H. Advanced Engineering Materials, 2001, 3, 217.
39 Holleck H, Schier V. Surface and Coatings Technology, 1995, 76-77(95), 328.
40 Urakami A, Fine M E. Scripta Metallurgica, 1970, 4(9), 667.
41 Clegg W J, Kendall K, Alford N M, et al. Nature, 1990, 347(6292), 455.
42 Lackner J M, Major L, Kot M. Bulletin of the Polish Academic of Sciences Technical Sciences, 2011, 59, 343.
43 Shang H F, Li J, Shao T M. Applied Surface Science, 2014, 310, 317.
44 Ali R, Sebastiani M, Bemporad E. Materials and Design, 2015, 75, 47.
45 Major L, Morgiel J, Major B, et al. Surface and Coatings Technology, 2006, 200, 6190.
46 Buchmann M, Gadow A, Tabellion J.Materials Science & Engineering A, 2000, 288, 154.
47 Bian D, Yang D L, Zhao Z L,et al. Ceramics International, 2015, 41, 9088.
48 Qiu L S, Zhu X D, Xu K W.Surface and Coatings Technology, 2017, 332, 267.
49 Xiao L R, Nie Y C, Zhao X J, et al.Surface Technology, 2020, 49, 203.
50 Keckes J, Bartosik M, Daniel R, et al. Scripta Materialia, 2012, 67, 748.
51 Stefenelli M, Todt J, Riedl A, et al. Journal of Applied Crystallography, 2013, 46, 1378.