聚丙烯纤维增强尾砂胶结充填体力学及流动性能研究

doi:10.11896/cldb.20080287

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (4798KB)
Export: BibTeX | EndNote (RIS)

Abstract Aiming at the influence of polypropylene fiber content, length and slag content on the mechanical and flow properties of polypropylene fiber reinforced cemented tailings backfill, an orthogonal experimental design was carried out. Through the range and variance analysis of the test results, the degree of influence and significant influence factors of the three factors are obtained, and the mechanism of the influence of fibers on the mechanical properties of the cemented tailings backfill is revealed with the help of scanning electron microscope (SEM). The research results show that: the slump of filler slurry decreased by 8.7% and 4.3% with the increase of fiber content and length indicating that the incorporation of fibers can have an adverse effect on the fluidity of the slurry; the compressive strength and tensile strength of the cemented tailings backfill at 28 d both increase first and then decrease with the increase of the fiber content and reach the maximum when the fiber content is 0.6%, but the improvement effect of the tensile strength of the polypropylene fiber by the fiber is obviously better than compressive strength; the incorporation of slag has no significant effect on the fluidity of the cemented tailings backfill, but the increase in slag content reduces the compressive and tensile strength of the backfill by 17.9% and 19.7%, which shows that the incorporation of slag will adversely affect the mechanical properties of the fiber reinforced cemented tailings backfill; the incorporation of fibers can effectively limit the propagation of cracks in the cemented tailings backfill and the failure characteristics of the cemented tailings backfill change from brittleness to ductility with the increase of fiber content; the key to the mechanical properties of the fiber-reinforced backfill is that there is a bonding force between the fiber and the mortar matrix, so that the fibers across the cracks can form an “anchor” effect thereby improving the overall mechanical properties of the backfill.

Key words： polypropylene fiber cemented tailings backfill mechanical property flow property orthogonal test

Published: 03 November 2021

CLC number:

TD853

Fund:National Key Laboratory of Nickel and Cobalt Resources Comprehensive Utilization (201902), the Key Program of National Natural Science Foundation of China(51734001), Fundamental Research Funds for the Central Universities(FRF-TP-18-003C1).

About author:: Yongqiang Hou is a Ph.D. student at the School of Civil and Resource Engineering, University of Science and Technology Beijing. He is mainly engaged in the study of filling body mechanics and filling materials.
Shenghua Yin, a professor of mining engineering at the School of Civil and Resource Engineering, University of Science and Technology Beijing, and a doctoral supervisor. His research interests are leaching mining, high-efficiency mining of metal mines and mine rock mechanics.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HOU Yongqiang
	YIN Shenghua
	ZHAO Guoliang
	ZHANG Pengqiang
	YANG Shixing
	ZHANG Minzhe
	LIU Hongbin

Cite this article:

HOU Yongqiang,YIN Shenghua,ZHAO Guoliang, et al. Study on the Mechanical and Flow Properties of Polypropylene Fiber Reinforced Cemented Tailings Backfill[J]. Materials Reports, 2021, 35(19): 19030-19035.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20080287 OR http://www.mater-rep.com/EN/Y2021/V35/I19/19030

1 Han B, Wang X L, Xiao W G. Journal of Mining & Safety Engineering, 2012,29(5),714(in Chinese).
韩斌,王贤来,肖卫国.采矿与安全工程学报, 2012,29(5),714.
2 Wang X M, Xue X L, Zhang Q L, et al. Journal of Central South University (Science and Technology), 2015,46(10), 3767(in Chinese).
王新民, 薛希龙, 张钦礼, 等.中南大学学报(自然科学版), 2015,46(10),3767.
3 Xu W B, Du J H, Song W D, et al. Rock and Soil Mechanics, 2013,34(8),2295(in Chinese).
徐文彬, 杜建华, 宋卫东, 等.岩土力学, 2013,34(8),2295.
4 Gao J K, Yang C X. Chinese Journal of Rock Mechanics and Enginee-ring, 2003,22(Sup2),2625(in Chinese).
高建科, 杨长祥. 岩石力学与工程学报,2003,22(增刊2):2625.
5 Cheng A P, Dai S Y, Zhang Y S, et al. Chinese Journal of Rock Mecha-nics and Engineering, 2019,38(S1), 3053(in Chinese).
程爱平, 戴顺意, 张玉山, 等.岩石力学与工程学报,2019,38(S1),3053.
6 Li X B, Liu B, Yao J R, et al. The Chinese Journal of Nonferrous Metals, 2018, 28(9),1845(in Chinese).
李夕兵, 刘冰, 姚金蕊, 等. 中国有色金属学报,2018,28(9),1845.
7 Zhang X X, Qiao D P. The Chinese Journal of Nonferrous Metals, 2015, 25(1),258(in Chinese).
张修香, 乔登攀. 中国有色金属学报, 2015, 25(1), 258.
8 Yu R C. Mining Technology, 2011, 11(3), 1(in Chinese).
于润沧.采矿技术, 2011, 11(3),1.
9 Liu F Y, Ding W Q, Qiao Y F. Construction and Building Materials, 2019,212,675.
10 Chen L J, Zhang X X, Liu G M. 2020. Construction and Building Materials, 2020,254,119167.
11 Liu X, Wu T, Yang X, et al. Journal of Building Materials, 2019,22(5),700(in Chinese).
刘喜, 吴涛, 杨雪, 等. 建筑材料学报, 2019,22(5),700.
12 Wang C Q, Wu K R. Journal of Building Materials,2005(3),250(in Chinese).
王成启, 吴科如. 建筑材料学报, 2005(3),250.
13 Chen X, Shi X Z, Zhou J, et al. Construction and Building Materials, 2018,190,211.
14 Yi X W, Ma G W, Fourie A. Geotextiles and Geomembranes, 2015,43,207.
15 Cao S, Yilmaz E, Song W D. Construction and Building Materials,2019,223,44.
16 Xue G L, Yilmaz E, Song W D, et al. Construction and Building Mate-rials, 2020,241,118113.
17 Xu Z J. Technology and application of fiber reinforced concrete, China Architecture & Building Press,China,2003(in Chinese).
徐志军. 纤维混凝土技术与应用, 中国建筑工业出版社, 2003.
18 Zhong H, Zhang M Z. Journal of Cleaner Production, 2020,259,120914.
19 Li X, Sun Q H, Yuan Y, et al. 2020. Tunnelling and Underground Space Technology, 2020, 103, 103506.