POLYMERS AND POLYMER MATRIX COMPOSITES |
|
|
|
|
|
Preparation of LDH-Thermal Expansion Microcapsules and Comprehensive Properties of Foamed EVA Composites |
CHEN Yuxing1, WANG Tianhao1, LI Xiaojie1, FU Hai1, HE Li2, GONG Wei1,2
|
1 School of Material and Architectural Engineering, Guizhou Normal University, Guiyang 550025, China 2 National Composite Modified Polymer Engineering Technology Research Center, Guiyang 550014, China |
|
|
Abstract Hydrotalcite LDH-thermal expansion microcapsules were prepared by shell loading under suspension polymerization, foamed ethylene-vinyl acetate (EVA) composite was prepared using thermal expansion microcapsules. Expansion properties of LDH-thermal expansion microcapsule and comprehensive properties of foamed EVA composites were investigated by SEM-EDS, TG. The results showed that loading of LDH increased the expansion temperature of the microcapsules, the expansion ratio of LDH-microcapsules is more than 5 times, and the stable foam temperature reaches about 36 ℃. LDH-microcapsules significantly improved the foaming quality and mechanical properties of foamed EVA composite, its cell average diameter was 52.4 μm, the tensile strength is increased by 26.3% compared with the addition of unmodified microcapsules. At the same time, LDH-microcapsules/EVA composite has excellent thermal insulation properties, and the thermal conductivity was 0.090 8 W/(m·K).
|
Published: 23 February 2021
|
|
Fund:This work was supported by the Guizhou Province 100-level Talent Project([2016]5673), Guizhou Provincial Research Institute Service Enterprise Action Plan Project ([2018]4010). |
Corresponding Authors:
gw20030501@163.com
|
About author:: Yuxing Chen is studying for a master's degree in the School of Materials and Construction Engineering of Guizhou Normal University, mainly engaged in the research of polymer foam materials and thermal expansion microcapsules. Wei Gong, Ph.D, professor, he is engaged in research of the structure and properties of polymer materials. |
|
|
1 He S Y, Qi H M, Liu F, et al. Plastics Industry, 2013, 4(5),96(in Chinese). 何思阳, 齐会民, 刘峰, 等. 塑料工业, 2013, 4(5), 96. 2 Shahabudin N, Yahya R, Gan S N. Polymers, 2016, 8(4),125. 3 Hou Z S, Xia Y R, Qu W Q, et al. International Journal of Polymeric Materials and Poymeric Biomaterials, 2015, 64(8),427. 4 Ji L J, Jiang Y S, Qiao W, et al. Acta Polymerica Sinica, 2015(8), 906(in Chinese). 纪立军, 姜亚帅, 乔炜,等. 高分子学报, 2015 (8), 906. 5 Fu H, Gong W, Chen B, et al. Journal of Macromolecular Science Part A, 2019, 26(1), 1. 6 Jeoung S K, Hwang Y J, Lee H W, et al. In: The International Confe-rence of the Polymer Processing Society. AIP Publishing LLC, Jeju Island, Korea, 2016, pp.1713. 7 Chen S Y, Sun Z C, Li L H, et al. Packaging Engineering,2017,38(1),51(in Chinese). 陈姝颖, 孙志成, 李路海, 等. 包装工程,2017, 38(1),51. 8 Chen X S, Gao Y B, Liu R X, et al.Rubber Industry, 2011,58(2),101(in Chinese). 陈晓松, 高炜斌, 刘日鑫, 等. 橡胶工业, 2011, 58(2),101. 9 Wang L J, Yang X, Zhang J,et al. Composites Part B: Engineering, 2014, 56(5),724. 10 Safajou-Jahankhanemlou M, Abbasi F. Colloid and Polymer Science, 2016, 294(6),1. 11 Kim J G, Jin U H, Sun K J, et al. Colloid and Polymer Science, 2015, 293(12),1. 12 Ji H B, Kim Y, Jin U H, et al. Polymer Korea, 2015, 39(1),78. 13 Chen S Y, Sun Z C, Li L H, et al. Chinese Chemical Letters, 2017, 28(3),658. 14 Cingi H E,Balmer J A, Armes S P, et al. Polymer Chemistry, 2010, 1(8),1323. 15 Schmid A, Sutton L R, Armes S P, et al. Soft Matter, 2009, 5(2), 407. 16 Vamvounis G, Jonsson M, Malmström E, et al. European Polymer Journal, 2013, 49(6),1503. 17 Lu Y, Broughton J, Winfield P. International Journal of Adhesion and Adhesives, 2016, 66,33. 18 Chi J, Yu H, Qin B, et al. ACS Applied Materials & Interfaces, 2017, 9(1), 464. 19 Qu Z, Yin D, Zhou H, et al. European Polymer Journal, 2019, 116,291. 20 Sun D, Li G Q, Ai Y Y, et al.Journal of Aerodynamics, 2019, 34(8),163(in Chinese). 孙丹, 李国勤, 艾延廷, 等. 航空动力学报, 2019, 34(8),163. 21 Gong P, Zhai S, Lee R E, et al. Industrial & Engineering Chemistry Research, 2018, 57(15),5464. 22 Baetens R, Jelle B P. Energy & Buildings, 2011, 43(4),761. |
|
|
|