工业固体废弃物制备二氧化硅功能材料的研究进展

doi:10.11896/cldb.19120139

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (7653KB)
Export: BibTeX | EndNote (RIS)

Abstract In recent years, about 3.3 billion tons of solid waste are produced in China every year. The solid waste produced in the process of industrial production is often open stored in the natural environment, which pollutes the soil, water and air environment, and also brings great potential danger to the survival of human beings. The low efficiency of comprehensive utilization and small space of increment is one of the main reasons for the massive accumulation of the solid waste. Therefore, it is urgent to seek efficient and comprehensive disposal methods of the solid waste.
Phosphorus slag of electric furnace, slag produced in iron and steel smelting and nonferrous metal smelting process, fly ash produced in the domains of building materials and electric power are common bulk solid wastes. These wastes are rich in silica, which mainly exists in the form of silicate, crystalline silica and amorphous silica. In addition, depending on the origins and production methods of solid waste, there are also diffe-rent mineral phase components, and sometimes there are rare earth elements, alumina and other high-value non-ferrous metals.White carbon black and silica aerogels can be prepared after separating rare earth metals and valuable elements such as alumina from the solid wastes, and zeolite can also be prepared by using silica and alumina from the solid wastes.
White carbon black is an amorphous nano-silica material with high porosity, high dispersion and good thermal stability. It is an important raw material for preparing catalysts, rubber reinforcing agents, thixotropic agents, thermal insulators and other materials.It is widely used in rubber, chemical industry, electronics, medicine and other fields. Silica aerogel has the advantages of large specific surface area, low volume density and low thermal conductivity, which can be used as a carrier for preparing catalysts, heat preservation and insulation materials, electronic film mate-rials and radio luminescent devices. Zeolite can be synthesized by aluminum silicate gel preparing from alumina and silicon in the solid wastes firstly, followed by water heated treatment. Resulted from developed pore structure it can accommodate a variety of cationic, zeolite has one or more properties of adsorption, ion exchange and catalysis, and therefore is widely used for industrial adsorbent, catalyst, membrane materials and the processing additives, ion exchange materials and chemical sensors, etc. The preparation of white carbon black, silica aerogel or zeolite after extracting valuable elements from solid waste rich in silicon dioxide is an effective way to improve the utilization rate and value-added rate of the solid wastes.
In this paper, the composition of several typical solid wastes rich in silicon dioxide and the mineral-phase characteristics of silica in them are compared and analyzed, and the research progress of silica separation and preparation of functional materials such as white carbon black, silica aerogel and zeolite are reviewed. So as to provide reference for the preparation of silica functional materials with solid wastes.

Key words： solid waste silicon dioxide white carbon black aerogel zeolite comprehensive utilization

Published: 19 February 2021

CLC number:

TF09

Fund:This work was financially supported by the National Natural Science Foundation of China (21978122, 21566017), Analysis and Test Fund of Kunming University of Science and Technology (2019M20182202021).

About author:: Bowen Su received his bachelor of engineering degree from Liaoning Shihua University in July 2017. He is currently pursuing his master degree at the Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology under the supervision of Prof. Yalong Liao. His research has focused on materials preparation with friendly environmental process from mineral wastes.
Yalong Liao received his B.E. degree in chemical engineering from Sichuan University in 1988 and received his Ph.D. degree in metallurgical engineering from Kunming University of Science and Technology in 2007. He is currently a full professor in Kunming University of Science and Technology. His research interests are resource utilization, and metallurgical physical chemistry.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	SU Bowen
	SHI Gongchu
	LIAO Yalong
	ZHANG Yu
	WANG Wei
	XI Jiajun

Cite this article:

SU Bowen,SHI Gongchu,LIAO Yalong, et al. Research Progress on Functional Materials Preparation of Silica from Industrial Solid Wastes[J]. Materials Reports, 2021, 35(3): 3026-3032.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.19120139 OR http://www.mater-rep.com/EN/Y2021/V35/I3/3026

Ilutiu-Varvara D A.Polish Journal of Environmental Studies,2016,25(1),147.2 Malik A, Grohmann E.Environmental protection strategies for sustainable development, Springer Netherlands, Netherlands,2012.3 National Bureau of Statistics of China. China statistical yearbook, China Statistics Press, China,2018(in Chinese).国家统计局.中国统计年鉴,中国统计出版社,2018.4 Reuter M, Xiao Y, Boin U.In: VII International conference on molten slags fluxes and salts, The South African Institute of Mining and Metallurgy. Johannesburg, South Africa,2004,pp.349.5 Cabanova K, Vlcek J, Seidlerova J, et al.Materials Today: Proceedings,2018,5,S2.6 Ye Y P, Zeng X Q, Qian W L, et al.Fuel,2008,87(10),1880.7 Urosevic D M, Dimitrijevic M D, Jankovic Z D, et al.Physicochemical Problems of Mineral Processing,2015,51(1),73.8 Chen Q J, Ding W J, Sun H J, et al.Energy,2019,188,116102.9 Kuwahara Y, Ohmichi T, Mori K, et al.Journal of Materials Science,2008,43(7),2407.10 Li C, Wan J H, Sun H H, et al.Journal of Hazardous Materials,2010,179(1-3),515.11 Quan X G, Wang H J.Chinese Journal of Chemical Engineering,2014,22(9),1055.12 Wang Z J, Zhang T, Zhou L.Cement and Concrete Composites,2016,74,174.13 Xu K J, Sun Q W, Guo Y Q, et al.Research on Chemical Intermediates,2014,40(5),1965.14 Manchanda C K, Khaiwal R, Mor S.Journal of Sol-Gel Science and Technology,2017,83(3),574.15 Gao H Y, Song Z Z, Yang L, et al.Energy & Fuels,2016,30(11),9645.16 Bochevskaya E G, Karshigina Z B, Abisheva Z S, et al.KnE Materials Science,2017,2017,116.17 Abisheva Z S, Karshigina Z B, Bochevskaya Y G, et al.Hydrometallurgy,2017,173,271.18 Su Y, Li G B, Xia J P, et al.Environmental Engineering,2008,26(5),98(in Chinese).苏毅,李国斌,夏举佩,等.环境工程,2008,26(5),98.19 Lin H Y, Wan L, Yang Y F.Advanced Materials Research,2012,512-515,1548.20 Sun P M, Li G M, Tong J W, et al.Journal of China Coal Society,2007,32(7),744(in Chinese).孙培梅,李广民,童军武,等.煤炭学报,2007,32(7),744.21 Tang Y, Chen F L.Mining and Metallurgical Engineering,2008,28(6),73(in Chinese).唐云,陈福林.矿冶工程,2008,28(6),73.22 Wang X H, Wang B D, Xiao Y F, et al.Advanced Materials Research,2014,878,264.23 Wang Y W.Global Geology,2014,17(3),182.24 Zhang Z J, Sun Y M, Yao Q, et al.Acta Mineralogica Sinica,2007,27(2),137(in Chinese).张战军,孙俊民,姚强,等.矿物学报,2007,27(2),137.25 Shoppert A, Loginova I V, Chaikin L I, et al.KnE Materials Science,2017,2017,89.26 Wang L.Preparation of silica aerogel from high-alumina fly ash: an expe-rimental study. Master's Thesis, China University of Geosicences (Beijing), China,2006(in Chinese).王蕾. 利用高铝粉煤灰制备氧化硅气凝胶的实验研究.硕士学位论文,中国地质大学(北京),2006.27 Dorcheh A S, Abbasi M H.Journal of Materials Processing Technology,2008,199(1-3),10.28 Tadjarodi A, Haghverdi M, Mohammadi V.Materials Research Bulletin,2012,47(9),2584.29 Shi F, Liu J X, Song K, et al.Journal of Non-Crystalline Solids,2010,356(43),2241.30 Shi F, Wang L J, Liu J X.Materials Letters,2006,60(29-30),3718.31 Wu X D, Fan M H, Mclaughlin J F, et al.Powder Technology,2018,323,310.32 Ye Z Q, Huang Z L, Wang F K, et al.Mining and Metallurgical Engineering,2018,38(3),86(in Chinese).叶子青,黄自力,王福坤,等.矿冶工程,2018,38(3),86.33 Hu W B, Li M M, Chen W, et al.Colloids and Surfaces A: Physicoche-mical and Engineering Aspects,2016,501,83.34 Maleki H, Duraes L, Garcia-Gonzalez C A, et al.Advances in Colloid and Interface Science,2016,236,1.35 Liu G W, Zhou B, Ni X Y, et al.Journal of the Chinese Ceramic Society,2012,40(1),160(in Chinese).刘光武,周斌,倪星元,等.硅酸盐通报,2012,40(1),160.36 Strom R A, Masmoudi Y, Rigacci A, et al.Journal of Sol-Gel Science and Technology,2007,41(3),291.37 Yun D S, Kim H J, Yoo J W.Bulletin of the Korean Chemical Society,2005,26(12),1927.38 Blaszczynski T, Slosarczyk A, Morawski M.Procedia Engineering,2013,57(1),200.39 Li T, Wang T.Materials Chemistry and Physics,2008,112(2),398.40 Charkhi A, Kazemeini M, Ahmadi S J, et al.Powder Technology,2012,231,1.41 Sue-Aok N, Srithanratana T, Rangsriwatananon K, et al.Applied Surface Science,2010,256(12),3997.42 Bogdanchikova N, Simakov A, Smolentseva E, et al.Applied Surface Science,2008,254(13),4075.43 Fathizadeh M, Aroujalian A, Raisi A.Journal of Membrane Science,2011,375(1-2),88.44 Mintova S, Bein T.Microporous and Mesoporous Materials,2001,50(2-3),159.45 Deng H, Ge Y.RSC Advances,2015,5(12),9180.46 Soe J T, Kim S S, Lee Y R, et al.Bulletin of the Korean Chemical Society,2016,37(4),490.47 Belviso C, Agostinelli E, Belviso S, et al.Microporous and Mesoporous Materials,2015,202,208.48 Kazemian H, Naghdali Z, Kashani T G, et al.Advanced Powder Techno-logy,2010,21(3),279.49 Chen D, Hu X, Shi L, et al.Applied Clay Science,2012,59-60,148.50 Anuwattana R, Khummongkol P.Journal of Hazardous Materials,2009,166(1),227.51 Bukhari S S, Behin J, Kazemian H, et al.Fuel,2015,140,250.52 Gordon J, Kazemian H, Rohani S.Microporous and Mesoporous Materials,2012,162,36.53 Sabouni R, Kazemian H, Rohani S.Chemical Engineering Journal,2010,165(3),966.54 Belviso C, Cavalcante F, Lettino A, et al.Ultrasonics Sonochemistry,2011,18(2),661.55 Anuwattana R, Balkus K J, Asavapisit S, et al.Microporous and Mesoporous Materials,2008,111(1-3),260.56 Wang S N, Wang Y R, Du H, et al.The Chinese Journal of Nonferrous Metals,2017,27(8),1729(in Chinese).王少娜,王亚茹,杜浩,等.中国有色金属学报,2017,27(8),1729.57 Ding J, Ma S H, Zheng S L, et al.Hydrometallurgy,2016,161,58.