纤维素纳米晶基导电复合材料的应用进展

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2737KB)
Export: BibTeX | EndNote (RIS)

Abstract Cellulose nanocrystals (CNC) with characteristics of renewable,biodegradable, large aspect ratio and high specific surface area, has considered as an ideal nano-reinforcement material. With the development of conductive composites in the field of electronics and energy in recent years, CNC has been raised lots of interests in conductive composites with different conducting active material (conductive polymer and carbon material, metal oxide, etc.) to serve as matrix, templates, dispersant and reinforcing agents. In this paper, the characteristics of the preparation of CNC by acid hydrolysis and enzymatic hydrolysis are introduced. On this basis, the research progress of the CNC conductive composites made by the combination of CNC and various conductive active materials in the fields of conductive films, supercapacitors and sensors are summarized. Finally, the suggest of CNC in the field of electronics is proposed.

Key words： cellulose nanocrystals conductive film supercapacitor sensor

Published: 08 January 2021

CLC number:

TQ352

Fund:This work was financially supported by the National Key R & D Program of China (2017YED0600804) and the National Natural Science Foundation of China (31500497, 31670565).

About author:: Kexia Jin received her B.S. degree in wood science and technology from Central South University of Forestry and Technology in 2015. She is currently pursuing her Ph.D. at the International Center for Bamboo and Rattan. Her research has focused on bamboo cell wall and pre-paration and properties of nanocrystalline composite films. Xing'e Liu received her B.S., M.S., and Ph.D. degrees in wood science and technology from Anhui Agricultural University and Chinese Academy of Forestry in 1997, 2000, and 2005, respectively. In 2014, she became a professor at International Center for Bamboo and Rattan. She was a postdoctoral fellow at Chinese Academy of Forestry from 2006 to 2007. Her current research interests include the structure and properties of bamboo and rattan, and biomass-based carbon material.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JIN Kexia
	JIANG Zehui
	MA Jianfeng
	FU Feng
	YANG Shumin
	LIU Xing'e

Cite this article:

JIN Kexia,JIANG Zehui,MA Jianfeng, et al. Application Progress of Cellulose Nanocrystals-based Electroconductive Composites[J]. Materials Reports, 2020, 34(Z2): 521-524.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2020/V34/IZ2/521

1 Hoeng F, Denneulin A, Bras J. Nanoscale, 2016, 8(27), 13131
2 Grishkewich N, Mohammed N, Tang J, et al. Current Opinion in Colloid and Interface Science, 2017, 29, 32.
3 Chen W, Yu H, Lee S Y, et al.Chemical Society Reviews, 2018, 47(8), 2837.
4 Klemm D, Kramer F, Moritz S, et al. Angewandte Chemie, 2011, 50(24), 5438.
5 Vasconcelos N F, Feitosa J P A, Gama F M P D, et al. Carbohydrate Polymers, 2017, 155, 425.
6 Liu Y, Wang H, Yu G, et al. Carbohydrate Polymers, 2014, 110(1), 415.
7 Chen L, Zhu J, Baez C, et al. RSC Green Chemistry, 2016, 18(13), 3835.
8 Sèbe G, Hampichavant F, Ibarboure E, et al. Biomacromolecules, 2012, 13(2), 570.
9 Yue Y, Zhou C, French A D, et al. Cellulose, 2012, 19(4), 1173.
10 Khili F, Borges J, Almeida P L, et al. Waste & Biomass Valorization, 2018, 22, 1.
11 金克霞, 江泽慧, 刘杏娥, 等. 材料导报, 2019, 33(9), 2997.
12 Chen L, Wang Q, Hirth K, et al. Cellulose, 2015, 22(3), 1753.
13 卓治非, 房桂干, 沈葵忠, 等. 江苏造纸, 2015(1), 14.
14 Zhang Y, Xue G X, Zhang X M, et al. Advanced Materials Research, 2012, 441, 754.
15 Tang Y, Shen X, Zhang J, et al. Carbohydrate Polymers, 2015, 125, 360.
16 Milena M T, Masson M M, Silva Natália C, et al. Carbohydrate Polymers, 2018, 198, 61.
17 Xiong R, Hu K, Grant A M, et al. Advanced Materials, 2016, 28(7), 1501.
18 万思杰, 虎伟, 江雷, 等. 科学通报, 2017, 62(27), 61.
19 Berg O V D, Schroeter M, Capadona J R, et al. Journal of Materials Chemistry, 2007, 17(26), 2746.
20 Hamad W Y, Atifi S. US patent, US9384867, 2016.
21 Wang S, Wei C, Gong Y, et al. RSC Advances, 2016, 6(12), 10168.
22 Valentini L, Bon S B, Fortunati E, et al. Journal of Materials Science, 2014, 49(3), 1009.
23 Valentini L, Cardinali M, Fortunati E, et al. Applied Physics Letters, 2014, 105(15), 153111.
24 Chen Q, Liu P, Sheng C, et al. RSC Advances, 2014, 4(74), 39301.
25 Nan F, Chen Q, Liu P, et al. RSC Advances, 2016, 6(96), 93673.
26 Meng Q, Manas-Zloczower I. Composites Science and Technology, 2015, 120, 1.
27 Wang F, Drzal L T, Qin Y, et al. Composites Part B Engineering, 2015, 79, 521.
28 Lizundia E, Nguyen T D, Vilas J L, et al. Journal of Materials Chemistry A, 2017, 5(36),19184.
29 Liew S, Walsh D, Thielemans W. RSC Advances, 2013, 3(24), 9158.
30 Huang Z, Wang A, Macdiarmid A G, et al. Langmuir, 1997, 13(13), 6480.
31 Wu X, Tang J, Duan Y, et al. Journal of Materials Chemistry A, 2014, 2(45), 19268.
32 Jung S M, Mafra D L, Lin C T, et al. Nanoscale, 2015, 7(10), 4386.
33 Wu X, Shi Z, Tjandra R, et al. Journal of Materials Chemistry A, 2015, 3(47), 23768.
34 Yang X, Shi K, Zhitomirsky I, et al. Advanced Materials, 2015, 27(40), 6104.
35 Shi K, Yang X, Cranston E D, et al.Advanced Functional Materials, 2016, 26(35), 6437.
36 Chen G, Chen T, Hou K, et al. Carbon, 2018, 127, 218.
37 Tang J, Song Y, Berry R, et al. RSC Advances, 2014, 4(104), 60249.
38 Sadasivuni K K, Ponnamma D, Ko H U, et al.Sensors and Actuators B Chemical, 2016, 233, 633.
39 Xu G, Liang S, Fan J, et al.Microchimica Acta, 2016, 183(6), 2031.
40 Cao J, Zhang X, Wu X, et al. Carbohydrate Polymers, 2016, 140, 88.
41 Sadasivuni K K, Kafy A, Zhai L, et al.Small, 2015, 11(8), 994.
42 Kafy A, Akther A, Shishir M I R, et al.Sensors and Actuators A Physical, 2016, 247, 221.
43 Yan C, Wang J, Kang W, et al.Advanced Materials, 2014, 26(13), 2022.
44 Wang S, Zhang X, Wu X, et al. Soft Matter, 2016, 12(3), 845.
45 Chen L, Lai C, Marchewka R, et al.Nanoscale, 2016, 8(27), 13288.