METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Electron Beam Welding Process and Microstructure and Properties of Joint of GH4065A Alloy |
ZHAO Tong1, TANG Zhenyun1, LIU Qiaomu2, HUANG Shuo3, ZHANG Wenyun3, ZHANG Beijiang3
|
1 Science and Technology on Power Beam Processes Laboratory, AVIC Manufacturing Technology Institute, Beijing 100024, China 2 AECC Gas Turbine Establishment, Chengdu 610500, China 3 High Temperature Material Research Institute, Central Iron and Steel Research Institute, Beijing 100081, China |
|
|
Abstract In this paper, the weld quality of GH4065A alloy under different electron beam welding (EBW) conditions was studied. The causes of welding cracks and the mechanism of crack suppression by double-spot EBW were discussed. The microstructure and mechanical properties of the welded joint were tested and analyzed. It was found that the double-spot EBW can effectively connect GH4065A alloy, and the weld quality can meet the requirements of grade I in HB7608-1998. However, the conventional EBW was easy to crack. The results showed that the weld zone (WZ) of the EBW joint was dominated by dendrites, and there was segregation of Nb and Ti elements. The γ′ strengthening phase gradually coarsened from the weld to the matrix. The difference of microstructure between the WZ and the matrix was the main reason for the reduction of tensile plasticity at high temperature. The simulation results showed that the double-spot EBW can reduce the energy concentration in the welding process, improve the cooling speed of the weld, and reduce the tendency of cracking. After aging treatment, the strength coefficient of welded joint at 25—750 ℃ was over 96%, and the elongation of welded joint at 750 ℃ was 9%, indicating that EBW was an effective joining method of GH4065A alloy structure.
|
Published: 02 December 2020
|
|
Fund:This work was financially supported by the Special Foundation for State Major Basic Research Program of China (61429080102). |
About author:: Tong Zhaoreceived his M.S. degree in June 2014 from Beijing University of Chemical Technology. Since August 2014, he has worked in Science and Technology on Power Beam Processes Laboratory, AVIC Manufacturing Technology Institute, mainly engaged in the research of electron beam processing technology. |
|
|
1 |
Pollock T M, Tin S. Journal of Propulsion and Power, 2006, 22(2),361.2 Martin R, Evans D. JOM, 2000, 52(3),24.3 Sims C T, Stoloff N S, Hagel W C. Superalloys II—high temperature materials for aerospace and industrial power, John wiley & Sons, New York, 1987.4 Donachie M J, Donachie S J. Superalloys: a technical guide. 2nd Edition. ASM International, Ohio, 2002.5 Shi C X, Zhong Z Y. Acta Metallurgica Sinica, 1997, 33(1), 1(in Chinese).师昌绪, 仲增墉.金属学报, 1997, 33(1),1.6 Preliand F R, Furrer D.In: 8th International Symposium on Superalloys 718 and Derivatives. Pittsburgh, TMS, 2014, pp.3.7 Liu Y C, Zhang H J, Guo Q Y, et al. Acta Metallurgica Sinica,2018, 54(11), 1653(in Chinese).刘永长, 张宏军, 郭倩颖,等.金属学报, 2018, 54(11), 1653.8 Xie X S, Dong J X, Fu S H, et al. Acta Metallurgica Sinica, 2010, 46(11),1289(in Chinese).谢锡善, 董建新, 付书红,等.金属学报, 2010, 46(11), 1289.9 Zhang B J, Zhao G P, Zhang W Y, et al. Acta Metallurgica Sinica, 2015, 51(10), 1227(in Chinese).张北江, 赵光普, 张文云,等.金属学报, 2015(10),1227.10 Zhao G P, Huang S, Zhang B J, et al. Journal of Iron and Steel Research International, 2015, 27(2), 37(in Chinese).赵光普,黄烁,张北江,等. 钢铁研究学报, 2015, 27(2), 37.11 Qu S, Li Y, Ni J C, et al. Aeronautical Manufacturing Technology, 2015, 58(20), 53(in Chinese).曲伸, 李英, 倪建成,等. 航空制造技术, 2015, 58(20),53.12 Zhang B G, Wu L, Feng J C. Welding & Joining, 2004(2), 5(in Chinese).张秉刚, 吴林, 冯吉才.焊接, 2004(2), 5.13 Zhang L, Han X F, Wang L. Aeronautical Manufacturing Technology, 2015, 480(11),96.张露, 韩秀峰, 王伦.航空制造技术, 2015, 480(11),96.14 Hanning F, Andersson J. Welding in the World, 2018, 62(1),395.15 Dupont J N, Notis M R, Marder A R, et al. Metallurgical & Materials Transactions A, 1998, 29(11),2785.16 Richards N L, Chaturvedi M C, Liu Y G, et al. International Journal of Materials & Product Technology, 1996, 11(3-4),284.17 Richards N L, Nakkalil R, Chaturvedi M C. Metallurgical and Materials Transactions A (Physical Metallurgy and, Materials Science), 1994, 25(8),1733.18 Andersson J. Weldability of precipitation hardening superalloys: influence of microstructure. Ph.D. Thesis, Chalmers University of Technology, Sweden, 2011.19 Li Y J, Xia C Z, Shi L. Modern Welding Technology, 2010(7), 1(in Chinese).李亚江, 夏春智, 石磊.现代焊接, 2010(7), 1.20 Chinese Mechanical Engineering Society Welding Society. Welding ma-nual, 2nd Edition, China Machine Press, China, 2001(in Chinese).中国机械工程学会焊接学会.焊接手册, 第2版, 机械工业出版社, 2001.21 Xie W J. Effect of heat treatment on structures and properties of K445 superalloy. Master's Thesis, Xi'an University of Technology, China,2007(in Chinese).谢文江.热处理对K445高温合金组织及性能的影响.硕士学位论文,西安理工大学, 2007.22 Zhou B, Guo S Q, Liu W H, et al. Welding & Joining, 2010(7), 38(in Chinese).周标, 郭绍庆, 刘文慧,等.焊接, 2010(7), 38.23 Xie Y J, Wang M C, Wang M S. China Surface Engineering, 2010, 23(5), 1(in Chinese).谢玉江, 王茂才, 王明生.中国表面工程, 2010, 23(5), 1.24 Carter W T, Jones R M F. JOM, 2005, 57(4), 52.25 Long Z D, Zhuang J Y. Acta Metallurgica Sinica, 1999, 35(11), 1211(in Chinese).龙正东, 庄景云.金属学报, 1999, 35(11), 1211.26 Zhang B J, Zhao G P, Xu G H, et al. Acta Metallurgica Sinica, 2005, 41(11), 1207(in Chinese).张北江, 赵光普, 胥国华,等.金属学报, 2005, 41(11), 1207.27 Valitov V A, Mukhtarov S K, Raskulova Y A. Physics of Metals and Me-tallography, 2006, 102(1), 97.28 Franklin J E, Savage W F. Optics Express, 1974, 23(8),10653.
|
|
|
|