Materials Reports 2020, Vol. 34 Issue (Z1): 316-321 |
METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Research on Melting Process of Ultralight Magnesium-Lithium Alloys |
SONG Wenjie1, LIU Jie1, DONG Huiping1, ZHANG Guang2, WANG Tong3
|
1 College of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China; 2 School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China3 Shanxi Bada Magnesium Co.,Ltd., Yuncheng 043800, China |
|
|
Abstract Magnesium-lithium alloy as the lightest metal structural material at present, it has broad application prospects in aerospace, weapons and equipment, automotive and other fields due to its outstanding advantages such as low density, high specific strength, and high specific stiffness.However, in order to realize the large-scale application of ultralight magnesium-lithium alloys, it is necessary to solve the problem of difficult melting. This article reviews the current melting process of magnesium-lithium alloys, and takes Mg-8Li-3Al-3Zn-1Y as the research object, adopts SF6 gas protection casting air cooling, covering agent surface protection furnace cooling, covering agent comprehensive protection furnace coo-ling, covering agent and Ar gas protection casting air cooling and vacuum induction melting and Ar gas protection casting furnace cooling five melting processes to prepare magnesium-lithium alloys. The effects and mechanical properties of magnesium-lithium alloys prepared by five melting processes were compared and analyzed. Summarize the advantages and disadvantages of each melting process. The research in this paper has important guidance and reference significance for obtaining complete, defect-free, structure-optimized and high-performance cast magnesium-lithium alloys, as well as optimizing the large-scale production and preparation of magnesium-lithium alloys.
|
Published: 01 July 2020
|
|
Fund:This work was financially supported by the National Funds for Equipment Pre-Research (61409220408), the Program of China Scholarships Council (201808615136),the Key Research and Development Plan Project of Shaanxi Province (2019KW-23) and the Doctoral Scientific Research Starting Foundation of Shaanxi University of Science and Technology (2016GBJ-02). |
About author:: Wenjie Song is an associate professor and master's tutor of the School of Mechanical and Electrical Enginee-ring in Shaanxi University of Science and Technology. In 2016, he graduated from Northwestern Polytechnical University with a doctorate degree in materials processing engineering (Master and Doctor). He is the winner of excellent doctoral dissertation of Northwestern Polytechnical University. In the same year, he joined the School of Mechanical and Electrical Engineering of Shaanxi University of Science and Technology. He has been engaged in research on the melting process, microstructure and mechanical properties of magnesium-lithium alloys. Dr. Song has presided over 5 projects including the National Defense Basic Scientific Research Program of China, the Program of China Scholarships Council, the Key Research and Development Plan Project of Shaanxi Province, the Northwestern Polytechnical University Doctoral Dissertation Innovation Fund and the Doctoral Scientific Research Starting Foundation of Shaanxi University of Science and Technology. He also has participated in 5 projects including the National Defense Basic Scientific Research Project, the National Major Project, the State Key Laboratory of Solidification Technology and the Shanxi Province Key Laboratory of Advanced Magnesium-based Materials. Dr. Song has published more than 10 high-level SCI papers in important domestic and foreign journals such as Journal of Power Sources, Applied Surface Science, Journal of Alloys and Compounds, and has applied for 4 invention patents. He has participated in international and domestic academic conference reports six times, including two invited reports. |
|
|
1 Guo F, Liu L, Ma Y L, et al. Materials Science and Engineering A,2020,772,138792. 2 Sun Y H, Wang R C, Peng C Q, et al. Transactions of Nonferrous Metals Society of China,2017,27(7),1455. 3 Sahoo B N, Panigrahi S K. Materials & Design,2016,109,300. 4 王昌,赵曦,艾迪,等.广东化工,2017,44(20),132. 5 Chang L L, Shi C C, Cui H W. Transactions of Nonferrous Metals Society of China,2018,28(1),30. 6 Cao F R, Zhou B J, Ding X, et al. Journal of Alloys & Compounds,2018,745,436. 7 Guo F, Jiang L Y, Ma Y L, et al. Scripta Materialia,2020,179,16. 8 王祝堂.轻合金加工技术,2018,46(1),48. 9 Mahmudi R, Shalbafi M, Karami M, et al. Materials & Design,2015,75,184. 10 Zou Y, Zhang L H, Li Y, et al. Journal of Alloys and Compounds,2018,735,2625. 11 Zhang Z Y, Peng X D, Yan L, et al. Rare Metal Materials and Enginee-ring,2017,46(8),2055. 12 Tang Y, Le Q C, Misra R D K, et al. Materials Science and Engineering A,2018,712,266. 13 Król M. Journal of Thermal Analysis & Calorimetry,2018,133(1),237. 14 Tan Q Y, Atrens A, Mo N, et al. Corrosion Science,2016,112,734. 15 Czerwinski F. International Materials Reviews,2015,60(5),264. 16 严雄仲.中国化工贸易,2017,9(8),65. 17 张英,任智森,杨国英.有色金属加工,2007,36(4),14. 18 秦凯伦,孙婷婷,豆昌露,等.科学技术创新,2018(6),8. 19 Zhang J, Zhang Y, Wu G H, et al. Materials Science & Engineering A,2015,621,198. 20 姚新兆.镁锂合金熔铸工艺及组织性能的研究.硕士学位论文,湖南大学,2006. 21 张诗昌,段汉桥,蔡启舟,等.特种铸造及有色合金,2000(6),51. 22 李克杰,李全安.热加工工艺,2012,41(5),27. 23 Chen B, Lu C, Lin D L, et al. Transactions of Nonferrous Metals Society of China,2012,22(4),773. 24 Kim J H, Kim Y H, Yoo H S, et al. Journal of Nanoscience & Nanotechnology,2016,16(11),11233. 25 Cashion S P, Ricketts N J, Hayes P C. Journal of Light Metals,2002,2(1),37. 26 李明照.太原理工大学学报,2003,34(3),318. 27 穆彦青,靳玉春,黄志伟,等.热加工工艺,2011,40(11),21. 28 Ha W, Kim Y J. Journal of Alloys and Compounds,2006,422(1),208. 29 付彭怀,王渠东,蒋海燕,等.铸造技术,2005,26(6),489. 30 Li Y M, Peng X D, Hu F P, et al. Rare Metal Materials and Enginee-ring,2017,46(7),1775. 31 Zhao J, Zhang J, Liu W C, et al. Materials Science & Engineering A,2016,650,240. 32 Ding H B, Liu Q, Zhou H T, et al. Transactions of Nonferrous Metals Society of China,2017,27(12),2587. 33 杨云龙,曾建民.铸造技术,2018,39(5),960. 34 Yu X W, Shen S J, Jiang B, et al. Applied Surface Science,2016,370,357. 35 樊建锋,谢辉,杨根仓,等.热加工工艺,2003(5),46. 36 陈虎魁,刘建睿,沈淑娟,等.材料导报,2004,18(4),82. 37 严炎祥,姚敏.特种铸造及有色合金,1996(4),41. 38 杜鹏.稀土Y、Gd对镁锂合金组织及性能的影响.硕士学位论文,东北大学,2014. 39 董天顺,刘金海,陈刚,等.铸造工程,2013,37(3),5. 40 Singh P B, Sabat R K, Kumaran S, et al. Journal of Materials Enginee-ring & Performance,2018,27(2),864. |
|
|
|