纤维增强复合材料与铝合金自冲铆接研究进展

doi:10.11896/cldb.19040060

Abstract
Figure/Table
References
Related Citation (9)

Download:

Full Text ( PDF ) (10284KB)
Export: BibTeX | EndNote (RIS)

Abstract To reduce vehicle exhaust emissions and improve energy efficiency, lightweight automotive bodies are a mainstream trend of automotive design and manufacture. In recent years, new lightweight materials such as aluminium alloys, magnesium alloys, titanium alloys and fiber reinforced polymers (FRP) have been widely used in automotive and aerospace industries due to their low density, high specific strength and stiffness. FRP have high specific modulus, corrosion resistance, excellent thermophysical and fatigue properties, as well as the advantages of damping and easy to design, and the application of FRP in automobiles is continually expands.
With the application of light materials in automotive bodies, the multi-material structures put challenges to the joining technology. Resistance spot welding, laser welding, traditional riveting and adhesive bonding are commonly joining technologies used for automotive bodies. With the application of aluminium body and multi-material body, new joining technologies such as self-piercing riveting (SPR), mechanical clinching and friction stir welding have been popularized and applied. In engineering applications, FRP are often connected with aluminium alloys. SPR, as a new technology for joining light sheets, provides a solution for the connection between composites and metals. The damage of FRP in riveting region will be induced during SPR process, which affects the appearance and mechanical properties of the joints. Therefore, the damage of composite materials and its effect on joint performance are the core issues concerned by automotive enterprises.
At present, the research on SPR of composite materials mainly focuses on the joining of carbon fiber composites, glass fiber composites with aluminium alloys. The matrix of the FRP studied is epoxy resin and polyamide. The tissue of the reinforced fibers can be divided into short-cut type, braided type and unidirectional type. As a kind of thermosetting matrix, epoxy resin-base fiber reinforced composites can only be placed as upper sheets to achieve effective joining, while thermoplastic resin matrix composites with better ductility can be used as upper or lower sheet. The for-ming process of the joints affects the damage degree of the composite materials. The use of rivet with the round head, increasing riveting speed and controlling the height of the rivet head higher than the surface of the upper sheet can reduce the damage of the composite materials, and lead to the joints obtain better mechanical properties.
This review offers a retrospection of the research efforts with respect to the SPR of composite materials and aluminium alloys. The forming quality, riveting damage, mechanical properties, failure modes and numerical simulation of the joints are discussed, and the prospect of related research ideas and methods are suggested in order to provide a reference for the application of fiber reinforced polymers in automobive body.

Key words： fiber reinforced polymers self-piercing riveting aluminium alloy lightweighting of automotive body

Published: 13 May 2020

CLC number:

TH131.1

Fund:This work was financially supported by the National Natural Science Foundation of China (51775227,51375201), National Key R & D Plan (2016YFB0101601), Special Project of Co-constructing by Jilin Province and the University (SXGJSF2017-2-1-5).

About author:: Yang Liu is currently pursuing his Ph.D. at the College of Automotive Engineering, Jilin University under the supervision of Prof. Weimin Zhuang. His research has focused on lightweight design of body structure.
Weimin Zhuang received her Ph.D. degree in vehicle engineering from the College of Automotive Enginee-ring, Jilin University, in 2006. During the period from 2007 to 2008, she conducted a visiting study at Impe-rial College London, mainly engaged in the research work of lightweight design of body structure. She is currently a full professor in Jilin University.
Dongxuan Xie received his B.E. and Ph.D. degrees in College of Automotive Engineering from Jilin University in 2012 and 2017, respectively. His research interests are body structure design and optimization, finite element analysis and metal forming technology. He is currently a product engineer in Technical Development Department of FAW-Volkswagen Automotive Co., Ltd.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Yang
	ZHUANG Weimin
	XIE Dongxuan

Cite this article:

LIU Yang,ZHUANG Weimin,XIE Dongxuan. Research Progress on Self-piercing Riveting of Fiber Reinforced Polymers and Aluminium Alloy Sheets[J]. Materials Reports, 2020, 34(11): 11053-11063.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.19040060 OR http://www.mater-rep.com/EN/Y2020/V34/I11/11053

1 Zhang J Y, Jiang Z, Li Z Y, et al. Automotive Engineering, 2018, 40(10), 1166 (in Chinese).
张君媛, 姜哲, 李仲玉, 等. 汽车工程, 2018, 40(10), 1166.
2 Song Y L, Yang L, Guo W, et al. Materials Reports A: Review Papers, 2016, 30(17), 16 (in Chinese).
宋燕利, 杨龙, 郭巍,等. 材料导报:综述篇, 2016, 30(17), 16.
3 González C, Vilatela J J, Molina-aldareguía J M, et al. Progress in Materials Science, 2017, 89, 194.
4 Zhang D W, Zhang Q, Fan X G, et al. Rare Metal Materials and Engineering, 2019, 48(1), 44.
5 Pramanik A, Basak A K, Dong Y, et al. Composites: Part A, 2017, 101, 1.
6 Lambiase F, Paoletti A. Journal of Manufacturing Processes, 2018, 31, 812.
7 He X C, Pearson I, Young K.Journal of Materials Processing Technology, 2008, 199(1), 27.
8 Zhuang W M, Liu Y, Wang P Y, et al.Journal of Jilin University(Engineering and Technology Edition), 2019(6),1836(in Chinese).
庄蔚敏, 刘洋, 王鹏跃, 等. 吉林大学学报(工学版), 2019(6),1836.
9 Liu Y, Zhuang W M, Shi H D. Materials Reports A: Review Papers, 2019, 33(11), 1825 (in Chinese).
刘洋, 庄蔚敏, 施宏达. 材料导报:综述篇, 2019, 33(11), 1825.
10 Zhang J, He X C, Ding W Y.Ordnance Material Science and Enginee-ring, 2018, 288, 41(3), 54 (in Chinese).
张杰, 何晓聪, 丁文有. 兵器材料科学与工程, 2018, 288, 41(3), 54.
11 Kang J, Rao H, Zhang R, et al. IOP Conference Series: Materials Science and Engineering, 2016, 137, 012025.
12 Fratini L, Ruisi V F. International Journal of Advanced Manufacturing Technology, 2009, 43(1-2), 61.
13 Ding W Y, He X C, Liu J M, et al. Science Technology and Engineering, 2018, 18(25), 143 (in Chinese).
丁文有, 何晓聪, 刘佳沐, 等. 科学技术与工程, 2018, 18(25), 143.
14 Deng C. Research on riveting process and performance of sandwich structures self-piercing riveted joints. Master's Thesis, Kunming University of Science and Technology, China, 2018 (in Chinese).
邓聪. 三明治结构自冲铆接头成形工艺研究. 硕士学位论文, 昆明理工大学, 2018.
15 Zhang J, Yang S. Journal of Composite Materials, 2015, 49(12), 1493.
16 Wu X D, Wang M, Kong L, et al. Machinery Design & Manufacture,2017(2), 210 (in Chinese).
吴小丹,王敏,孔谅,等. 机械设计与制造, 2017(2), 210.
17 Liang J, Jiang H, Zhang J, et al. Archives of Civil and Mechanical Engineering, 2019, 19, 240.
18 Meschut G, Gude M, Augenthaler F, et al. Procedia CIRP, 2014, 18, 186.
19 Gay A, Roche J, Lapeyronnie P, et al. International Journal of Damage Mechanics, 2017, 26(8), 1127.
20 Rao H M, Kang J, Huff G, et al.International Journal of Fatigue, 2018, 113, 11.
21 Franco G D, Fratini L, Pasta A, et al. International Journal of Material Forming, 2010, 3(1 Supplement), 1035.
22 Rao H M, Kang J, Huff G, et al. SAE International Journal of Materials and Manufacturing, 2017, 10(2), 167.
23 Zhao L, He X C, Xing B Y, et al. Journal of Materials Processing Technology, 2017, 249, 246.
24 Han L, Chrysanthou A, Young K W, et al. Fatigue & Fracture of Engineering Materials & Structures, 2006, 29(8), 646.
25 Li D Z, Chrysanthou A , Patel I, et al. The International Journal of Advanced Manufacturing Technology, 2017, 92, 1777.
26 Franco G D, Fratini L, Pasta A. Materials & Design, 2012, 35, 342.
27 Gay A, Lefebvre F, Bergamo S, et al. International Journal of Fatigue, 2016, 83, 127.
28 Li Y B, Ma Y W, Lou M, et al. Journal of Mechanical Engineering, 2016, 52(24), 1 (in Chinese).
李永兵, 马运五, 楼铭, 等. 机械工程学报, 2016, 52(24), 1.
29 Lei L, He X C, Zhao D S, et al. Thin-Walled Structures, 2018, 131, 393.
30 Franco G D, Fratini L, Pasta A. International Journal of Adhesion and Adhesives, 2013, 41, 24.
31 Lu J W,He X C,Ding W Y, et al. Ordnance Material Science and Engineering, 2019, 42(2), 77 (in Chinese).
卢嘉伟, 何晓聪, 丁文有, 等. 兵器材料科学与工程, 2019, 42(2) , 77.
32 Fiore V, Alagna F, Galtieri G, et al. Composites: Part B, 2013, 45, 911.
33 Franco G D, Fratini L, Pasta A. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2012, 226(3), 230.
34 Mandel M, Kruger L. Materials Today: Processings, 2015, 2(S1), S131.
35 Mandel M, Kruger L. Materialwissenschaft Und Werkstofftechnik, 2012, 43(4), 302.
36 Mandel M, Kruger L. Materialwissenschaft Und Werkstofftechnik, 2014, 45(12), 1123.
37 Mandel M, Kruger L. Corrosion Science, 2013, 73, 172.
38 Liang J W, Li X, Wang F J, et al. Journal of Jiangsu University of Science and Technology (Natural Science Edition), 2018, 32(5), 678 (in Chinese).
梁佳炜, 黎雄, 王凤江, 等. 江苏科技大学学报(自然科学版), 2018, 32(5), 678.
39 Li X, Rao Z H, Wang F J, et al.Journal of Central South University (Science and Technology), 2018, 49(10), 2447.
黎雄, 饶政华, 王凤江, 等. 中南大学学报(自然科学版), 2018, 49(10), 2447.
40 Amro E, Kouadri-Henni A. In: Proceedings of the 21st International Esaform Conference on Material Forming: Esaform 2018. Palermo, 2018, pp. 050001-1.
41 Welf-Guntram D, Reinhard M, Raik G, et al. Key Engineering Mate-rials, 2013, 554-557, 1045.
42 Hirsch F, Müller S, Machens M, et al. Journal of Materials Processing Technology, 2017, 241, 164.