等离子弧粉末堆焊熔覆材料的研究现状与进展

doi:10.11896/cldb.18120076

Abstract
Figure/Table
References
Related Citation (4)

Download:

Full Text ( PDF ) (1985KB)
Export: BibTeX | EndNote (RIS)

Abstract Since the industrial application of plasma arc powder surfacing technology, it has been widely concerned in mechanical engineering all over the world, and has achieved encouraging results in the repair of mechanical parts and the surface life of components. With the development of modern science and technology, plasma arc powder surfacing equipment is continuously optimized and improved, and its automation, systemization and numerical control level are continuously improved, thus its industrial applications are more convenient and efficient. However, at present, it is given priority to self-fluxed alloy powder with researching of cladding materials, and a few high-performance new cladding materials have been reported. How to discover the technical advantages of the new equipment for plasma arc powder surfacing, and meet the needs of special performances for cladding material, such as high strength, high vacuum, high temperature, wear-resistant, corrosion-resistant, etc., which is big challenge for workers on surfacing welding cladding material.
In nearly a decade, the researcher focus at home and abroad is mainly concentrated on the compound design of self-fluxing alloy powder and its reinforced powder. Although some achievements have been achieved, it has not broadened the new research fields of cladding materials. In recent years, some researchers have begun to apply new powders, such as metal ceramic base, nano-particles, self-lubricating and high entropy alloys as cladding materials, which have been applied to the surface strengthening or repair of plasma arc powder surfacing, but the selection principle, composition optimization and preparation processes of composite powder need to be further research. In addition, it is lack of a set of systematic and scientific theory for the research of plasma powder surfacing welding cladding material.
At present, the domestic and international plasma cladding material systems mainly include: (1) alloying self-fluxed composite materials by adding some functional metal elements, which can improve the microstructure and properties of cladding layer by the solid solution strengthening, precipitation strengthening, dispersion strengthening and fine grain strengthening of added elements; (2) reinforced self-fluxed composite mate-rials by metal ceramic particles, which can improve the performance of cladding layer; (3) rare earth doped self-fluxed composite materials, which can purify the cladding layer microstructure by exerting the unique chemical activity of the rare earth; (4) metal-based self-lubricating composite materials, which consist of a metal or alloy as the base phase and a solid lubricant as the dispersed phase; (5) high entropy alloy compo-site materials, which mixed five or more metal powder. In addition, there are metal-based cladding materials, such as copper-based, zirconium-based, titanium-based, aluminum-based, and nano-based.With the help of some properties of these materials, the surfacing layer achieves functions such as wear resistance, corrosion resistance, anti-friction, high temperature resistance, oxidation resistance and biological compatibility.
This paper introduces the general design principle and basic composition optimization methods of cladding powder materials. The existing systems and research status of cladding materials are summarized and the problems of plasma arc surfacing welding cladding material are analyzed, and its developing trend of the surfacing welding cladding materials is prospected.

Key words： plasma arc surfacing welding design and optimization orthogonal analysis cladding material

Published: 27 April 2020

CLC number:

TG422

Fund:This work was financially supported by the National Natural Science Foundation of China(51861025), the Key Research Program of Jiangxi Province, China(20171BBE50043).

About author:: Shiyong Wei is the associate researcher in Institute of Applied Physics, Jiangxi Sciences Academy,and received his B.S. degree in Metal Material Engineering from Nanchang Aviation University in 2003, he is currently pursuing his Ph.D. at the Materials Science and Engineering College, Nanchang University under the supervision of Prof. Wenyi Peng. His research interests are metal materials and its surface modification, including coating of cemented carbide, high entropy alloys, self-lubricating,etc. In recent years,he has published more than 20 papers in the field of metal material and its surface modification.
Wenyi Peng, professor, vice chairwoman of Department of Materials Science and Engineering, School of Materials Science and Engineering, Nanchang University. She gained Talent Project in the New Millennium of Jiangxi Province granted by Jiangxi Provincial Government in 2009, Technical Innovation Award in Jiangxi Province, “Surface strengthening technology of Tantalum spinnerets” in 2002 and Progress Prize in Science and Technology in Jiangxi Province, “Application of multi-arc plasma plating to tool and die steels” in 1996 respectively.She obtained her Ph.D.at Shanghai Jiaotong University in 2006.
Xiaohua Deng, professor, doctoral supervisor, vice president of Nanchang University, distinguished professor for the Cheung Kong Scholars Program of the Ministry of Education(2002). He gained the National Science Fund for Distinguished Yong Scholars in 2003. He presided over the major projects from the NSFC, the major projects of scientific and technological Cooperation.His research interests include physics of plasma and its applications, Terahetz material and so on. His papers have been published in the prestigious international journals, such as Nature, Science, Physics of Plasma, Journal of Plasma Physics, etc.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WEI Shiyong
	PENG Wenyi
	CHEN Bin
	ZHAO Wenchao
	ZHOU Yingyu
	DENG Xiaohua

Cite this article:

WEI Shiyong,PENG Wenyi,CHEN Bin, et al. Current Status and Progress of Cladding Materials for Plasma Arc Powder Surfacing[J]. Materials Reports, 2020, 34(9): 9143-9151.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.18120076 OR http://www.mater-rep.com/EN/Y2020/V34/I9/9143

1 Mehmetolu M T, Gauvin W H. Aiche Journal,2010,29(2),207.
2 Zhang S, Wang S, Wu C L, et al. Engineering Failure Analysis,2017,76,115.
3 Chen G Q, Fu X S, Wei Y H, et al. Surface & Coatings Technology,2013,228(228),S276.
4 Deng Dewei, Chen Rui, Zhang Hongchao. Joural of Mechanical Engineering,2013,49(7),106(in Chinese).
邓德伟,陈蕊,张洪潮.机械工程学报, 2013,49(7),106.
5 Srimath N, Murugan N. Procedia Engineering,2012,38(5),15.
6 Wolfe T B, Henein H. Canadian Metallurgical Quarterly,2015,54(3),328.
7 Ravichandran M, Sabarirajan N, Sathish T, et al. Applied Mechanics and Materials,2016,852,324.
8 JB/T 7744-2011. Alloy powder used plasma arc overlaying welding for valve sealing surface,2011(in Chinese).
JB/T 7744-2011.阀门密封面等离子弧堆焊用合金粉末,2011.
9 Fu L M. Plasma surfacing, Agricultural Press,China,1989(in Chinese).
傅立明.等离子堆焊,农业出版社,1989.
10 Song W L, Zhu B D, Zhang J, et al. Laser Technology,1998, 22(1),34(in Chinese).
宋武林,朱蓓蒂,张杰,等.激光技术,1998,22(1),34.
11 Li J R. Ceramic-metal composite materials, Metallurgical Industry Press,China,2004(in Chinese).
李荣久.陶瓷-金属复合材料,冶金工业出版社,2004.
12 Liu K Q,Xu Q,et al. The preparation and application of metal ceramic,Metallurgical Industry Press,China,2008(in Chinese).
刘开琪,徐强,等.金属陶瓷的制备与应用,冶金工业出版社,2008.
13 Chen K. Experimental design and analysis,Tsinghua University Press,China,2005 (in Chinese).
陈魁.试验设计与分析,清华大学出版社,2005.
14 Lu J b, Yao S, Lou S N, et al. Materials for Mechanical Engineering,2006,30(3),36(in Chinese).
鲁建波,姚舜,楼松年,等.机械工程材料,2006,30(3),36.
15 Dong L H, Zhu S, Xu B S, et al. Journal of Materials Protection,2004,37(7),7(in Chinese).
董丽虹,朱胜,徐滨士,等.材料保护,2004,37(7),7.
16 Dong S Y,Ma Y Z,Xu B S, et al. Material Review,2006,20(6),5(in Chinese).
董世运,马运哲,徐滨士,等.材料导报,2006,20(6),5.
17 Ulutan M, Koray Kiliçay,et al. Journal of Materials Processing Technology,2016, 236,26.
18 Buytoz S, Orhan A,Gur A K, et al. Arabian Journal for Science and Engineering,2013,38,2197.
19 Cao H T,Dong X P,Pan Z,et al. Materials and Design,2016,100,223.
20 Liu S, Song Z, Cui W, et al. Transactions of the China Welding Institution,2017,38(4),39.
21 Azimi G, Shamanian M, et al. Journal of Alloys and Compounds,2010,505(2),598.
22 Li G D, Li Z X, Yang J Y, et al. Hot Working Technology,2014(23),196(in Chinese).
李国栋,栗卓新,杨津瑜,等.热加工工艺,2014(23),196.
23 Liu Y, Zhang G S, Wei S Z, et al. Chinese Jouranl of Materials Research,2013(6),641(in Chinese).
刘跃,张国赏,魏世忠,等.材料研究学报,2013(6),641.
24 Deng X K, Zhang G J, Wang T, Ren S, et al. Surface & Coatings Technology,2018,350,480.
25 Luo Y, Lei Y, Gong C, et al. Journal of Materials Engineering,2015,43(1),59.
26 Luo H, Tang L L, Zhang Y B. Journal of Shandong Jianzhu University,2010,25(1),14.
27 Mei Z, Yan Y W, Cui K. Materials Letters,2003,57(3),175.
28 Deng X, Zhang G, Wang T, et al. Materials Characterization,2017,131,517.
29 Zhuang M, Li M, Wang J, et al. Journal of Materials Engineering & Performance,2017,26(12),6182.
30 Zhang D, Xue H, Wang K, et al. Rare Metal Materials & Engineering,2018,47(2),469.
31 Yuan Y, Li Z. Applied Surface Science,2017,423,225.
32 Sundaramoorthy R, Tong S X, Parekh D, et al. Wear,2017,s376-377(377),1720.
33 Celik Nuri O. Applied Surface Science,2013,274,334.
34 Liu Y F, Mu J S, Xu X Y, et al. Materials Science & Engineering A, 2007,458(1),366.
35 Shi K, Hu S, Zheng H. Surface & Coatings Technology, 2011, 206(6),1211.
36 Li M X, Liu J, Li D K. Transactions of Materials & Heat Treatment,2015,36(11),214.
37 Zhang H, Zou Y, Zou Z, et al. Journal of Alloys & Compounds,2015,622,62.
38 Rai P, Kim Y S, Kang S K, et al. Plasma Chemistry & Plasma Proces-sing,2012,32(2),211.
39 Huang Z, Hou Q, Wang P. Surface & Coatings Technology,2008,202(13),2993.
40 Si S H, Yu W P, Zhang L, et al. Materials for Mechanical Engineering,2015,39(8),94(in Chinese).
斯松华,于婉萍,张磊,等.机械工程材料,2015,39(8),94.
41 Acevedo-Davila J R, Munoz-Arroyo R, Hdz-García H M, et al. Acuum,2017,143,14.
42 Mishra S B, Chandra K,Prakash S. Surface & Coatings Technology,2013,216,23.
43 Khademinia S, Behzad M. Nano Letters,2015,5,101.
44 Kim S J, Woo Y B, Lee S J, et al. Japanese Journal of Applied Physics,2013,52(11S),11NJ09.
45 Camélia Demian, Alain Denoirjean, Lech Pawłowski, et al. Surface & Coatings Technology,2016,300,104.
46 Zhang D K, Xue H B, Wang K H, et al. Rare Metal Materials & Engineering,2018,47(2),469.
47 Hou Q Y, Wang J T. Surface & Coatings Technology,2010,204,2677.
48 Praveen K, Sivakumar S, Ananthapadmanabhan P V. Ceramics International,2018,44,6417.
49 Han Y, Wang Y J, Wang S R. Applied Mechanics & Materials,2014,470,108.
50 Liu Y F, Feng Z C, Pu F, et al. Surface & Coatings Technology,2018,345,61.
51 Skarvelis P, Papadimitriou G D. Surface & Coatings Technology,2009,203(10),1384.
52 Skarvelis P, Papadimitriou G D. Tribology International,2009,42(11),1765.
53 Wang Y H. Research of wear-resistant self-lubricating coating by plasma surfacing welding on titanium alloy surface. Master’s Thesis, Tianjin Polytechnic University, China,2016(in Chinese).
王永海.钛合金表面等离子堆焊耐磨自润滑涂层的研究.硕士学位论文,天津工业大学,2016.
54 He Q, Ding Z, Ye Y, et al. JOM, 2017, 69,2092.
55 Lu J B, Peng Z Q, Ma M X, et al. Heat Treatment of Metals,2016, 41(4),51(in Chinese).
卢金斌,彭竹琴,马明星,等.金属热处理,2016,41(4),51.
56 Cheng J B, Liang X B, Xu B S. Surface & Coatings Technology,2014,240(7),184.
57 Cheng J, Liu D, Liang X, et al. Surface & Coatings Technology,2015,281,109.
58 Leylavergne M, Chartier T, Denoirjean A, et al. Thin Solid Films,2001,391(1),1.
59 Liu Y F, Zhou Y L, et al. Journal of Alloys & Compounds,2014,591(591),251.
60 Deuis R L, Bee J V, Subramanian C. Scripta Materialia,1997,37(6),721.
61 Yugeswaran S, Kobayashi A, et al. Current Applied Physics,2011,11(6),1394.
62 Birol Y, Kayihan A B. Metallurgical & Materials Transactions A,2011,42(11),3277.