硬质合金切削刀具研究进展

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (4684KB)
Export: BibTeX | EndNote (RIS)

Abstract The performance characteristics of iron-based cemented carbides are reviewed, especially concerning on the state-of the-art of WC-Co-based cemented carbides. The effects of different components on the properties of cemented carbides are summarized, and the powder preparation, sintering process, phase transformation in the preparation process and interfacial reaction are introduced. It is pointed out that the lattice matching of WC/Co thin layer interface makes it show excellent service performance. However, high-speed cutting poses new challenges to the properties of cemented carbide tools such as strength, hardness, wear resistance and high-temperature oxidation resistance, the development of new cemented carbides still has a long way to go

Key words： cemented carbide cemented carbide cut tool wear resistance interface

Published: 05 July 2019

CLC number:	TG135.5
	TG711

About author:: Qingchao Tian received his B.S. degree (1992) in metal materials and heat treatment from Nanchang Institute of Aeronautic technology, M.S. degree (1999) in materials science from Nanjing University of Science and Technology and Ph.D. degree (2002) in materials science from Shanghai Jiaotong University. He has been engaged in the development of new materials, new products, new processes and failure analysis in Central Research Institute of Baosteel, National Institute of Materials of Japan and Baosteel Iron & Steel Co. Ltd. Since 2016, he worked in the School of Materials Science and Engineering, Shanghai University. His research interest is mainly on the relationship between microstructure and properties of materials.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	XUE Yi
	TIAN Qingchao

Cite this article:

XUE Yi,TIAN Qingchao. Research Progress on Cemented Carbide Cut Tools[J]. Materials Reports, 2019, 33(z1): 353-357.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2019/V33/Iz1/353

1 Liu S. International Journal of Refractory Metals and Hard Materials,2009,27(3),528.
2 Ortner H M, Ettmayer P, Kolaska H. International Journal of Refractory Metals and Hard Materials,2014,44,148.
3 Katiyar P K, Singh P K, Singh R, et al. International Journal of Refractory Metals and Hard Materials,2016,54,27.
4 Pervaiz S, Kannan S, Kishawy H. Journal of Cleaner Production,2018,197,134.
5 Goindi G S, Sarkar P. Journal of Cleaner Production,2017,165,1557.
6 Chen J, Yang J, Chen B, et al. Surface and Coatings Technology,2016,305,23.
7 龙坚战, 陆必志, 易茂中, 等. 硬质合金,2015,32(3),204.
8 Abolaji R S, Bingxue Z, Anbalgam K, et al. Progress in Solid State Chemistry,2018,50,1.
9 Chicardi E, Bermejo R, Gotor F J, et al. International Journal of Refractory Metals and Hard Materials,2018,71,82.
10 Tarraste M, Kübarsepp J, Juhani K, et al. International Journal of Refractory Metals and Hard Materials,2018,73,183.
11 Mingard K P, Roebuck B, Marshall J, et al. Acta Materialia,2011,59(6),2277.
12 Toller L, Jacobson S, Norgren S. Wear,2017,376,1822.
13 Gao Y, Luo B H, He K J, et al. Ceramics International,2018,44(2),2030.
14 黄道远. 热/力作用下钴基硬质合金组织性能变化及相关机理的研究. 博士学位论文, 中南大学,2010.
15 Adorjan A, Schubert W D, Schön A, et al. International Journal of Refractory Metals and Hard Materials,2006,24(5),365.
16 Farag S, Konyashin I, Ries B. International Journal of Refractory Metals and Hard Materials,2018,77,12.
17 Soleimanpour A M, Abachi P, Simchi A. International Journal of Refractory Metals and Hard Materials,2012,31,141.
18 王红彬. 一步还原法制备(W-Ti-Ta-Nb)C复合碳化物的研究. 硕士学位论文, 中南大学,2009.
19 Li X, Liu Y, Wei W, et al. Materials & Design,2016,90,562.
20 丁勇. 一步法制备超细WC-Co基硬质合金的组织控制及性能. 硕士学位论文, 华南理工大学,2013.
21 朱敏. 华南理工大学学报 (自然科学版),2002,30(11),89.
22 王明超, 赵志伟, 杨德青, 等. 材料导报,2015,29(专辑25),26.
23 García J, Colladoés V, Blomqvist A, et al. International Journal of Refractory Metals and Hard Materials,2018,80,40.
24 Liu S, Huang Z L, Liu G, et al. International Journal of Refractory Me-tals & Hard Materials,2006,24(6),461.
25 蔡惠坤, 翁泽钜, 顾开选, 等. 材料导报:综述篇,2019,33(1),175.
26 尹福兰, 丁国富, 杨大治, 等. 金属热处理,2018,43(9),23.
27 Bounhoure V, Lay S, Loubradou M, et al. Journal of Materials Science,2008,43(3),892.
28 Konyashin I, Sologubenko A, Weirich T, et al. Materials Letters,2017,187,7.
29 Johansson S A E, Wahnström G. Current Opinion in Solid State and Materials Science,2016,20(5),299.
30 Mingard K P, Roebuck B, Marshall J, et al. Acta Materialia,2011,59(6),2277.
31 Weidow J, Andrén H O. International Journal of Refractory Metals and Hard Materials,2011,29(1),38.
32 Garcia J. International Journal of Refractory Metals and Hard Materials,2012,30(1),114.
33 Andren H O. Materials Chemistry and Physics,2001,67(1-3),209.
34 Shatov A V, Firstov S A, Shatova I V. Materials Science and Enginee-ring: A,1998,242(1-2),7.
35 贺从训, 毛昌辉, 汪有明, 等. 硬质合金,1996,13(1),23.
36 Zhang L, Schubert W D, Huang B Y, et al. P/M Science & Technology Briefs,2003,5(3),17.
37 Xu C H, Ai X, Huang C Z, et al. Chinese Rare Earths,1997,18(3),55.
38 Chen B, Yang J, Zhang Q, et al. Materials & Design,2015,75,24.
39 Spear J C, Ewers B W, Batteas J D. Nano Today,2015,10(3),301.
40 Zhang X, Zhang D, Tang H, et al. Materials Research Bulletin,2014,53,96.
41 Chen J, Yang J, Chen B, et al. Surface and Coatings Technology,2016,305,23.