高机械品质因数压电陶瓷材料的研究进展及应用

Abstract
Figure/Table
References
Related Citation (2)

Download:

Full Text ( PDF ) (2198KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper, the theoretical basis of high mechanical quality factor (Q_m) piezoelectric ceramic materials is elaborated from the physical mec-hanism, Q_m and its influencing factors such as grain size, lattice constant, domain wall motion and space charge, etc. Then several systems and research status of high Q_m piezoelectric ceramics are introduced. It is pointed out that doping modification, exploring new systems and processes are effective ways to improve the high Q_m of piezoelectric ceramic materials.Finally, the article gives a brief introduction to high Q_m piezoelectric ceramic devices.

Key words： high Q_m piezoelectric ceramics lattice constant space charge mechanical quality factor

Published: 05 July 2019

CLC number:

TM282

About author:: Tao Chu received his M.S. degrees in June 2013 from Fujian Institute of Research on the structure in engineering. From July 2013, he worked at Guizhou Zhenhua Hongyun Electronics Co., Ltd, focusing on the research of piezoelectric ceramic materials and devices.Wusong Wang is a senior engineer in Guizhou Zhenhua Electronic Information Industry Technology Research Co., Ltd. He received his Ph.D. degree in science from Tongji University in 2012. He is mainly engaged in the research of piezoelectric ceramic materials, microwave ferrite ceramic materials and microwave functional devices. He has participated in many projects of PLA General Equipment Department and Guizhou Science and Technology Program. He has published more than 20 articles and 3 patents in important periodicals at home and abroad.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHU Tao
	WANG Wusong
	WANG Xuejie
	ZHANG Tiancai
	YANG Gui
	ZHAI Jiwei

Cite this article:

CHU Tao,WANG Wusong,WANG Xuejie, et al. Research Progress and Application of High Mechanical Quality Factor Piezoelectric Ceramics[J]. Materials Reports, 2019, 33(z1): 165-170.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2019/V33/Iz1/165

1 钟维烈.铁电体物理学,科学出版社,1996.
2 雷淑梅,匡同春,白晓军.佛山陶瓷,2005,15(3),36.
3 李丽,何宏,林玉池.压电与声光,2010,32(6),942.
4 莫喜平.物理,2009,38(3),149.
5 石维,朱建国,肖定全,等.压电与声光,2013,35(4),549.
6 侯育冬,高峰,朱满康,等.电子元件与材料,2003,22(11),160.
7 朱婷.电子科技,2016,25(9),13.
8 孔凡国,陈然然,段文科.功能材料与器件,2015,21(5),133.
9 David Ruiz, José Carlos Bellido, Alberto Donoso. Archives of Computational Methods in Engineering,2018,25,313.
10 Alberto Donoso, José Carlos Bellido. Computer Methods in Applied Mechanics and Engineering,2018,338,27.
11 邓云云.低频纵-径振动转换水声换能器的研究.硕士学位论文,陕西师范大学,2018.
12 曹龙轩, 朱云龙, 金学健,等.压电与声光,2018,40(3),384.
13 周瑜, 涂其捷, 杨荣耀,等.声学技术,2018,37(3),286.
14 张卫珂,张敏,尹衍升.现代技术陶瓷,2005,1,38.
15 廖擎玮,陈小随,郭栋.应用声学,2013,32(6),508.
16 石伟丽,邢志国,王海斗.润滑与密封,2014,39(5),111.
17 Yamauchi F, Takahashi M. Journal of the Physical Society of Japan,1970,28,313.
18 李远, 秦自楷, 周志刚, 等. 压电与铁电材料的测量.第一版,科学出版社,1984.
19 Sadayuki Takahashi, Masao Takahashi. Japanese Journal of Applied Phy-sics,1972,11(1),31.
20 Masao Takahashi. Journal of the Physical Society of Japan,1970,9(10),1236.
21 刘静,丁凌峰,周静.功能材料,2000,31(2),18.
22 杜红亮,杜红娜,周万城,等.硅酸盐学报,2005,33(6),776.
23 山东大学压电铁电物理教研室.压电陶瓷及其应用,山东人民出版社,1974.
24 祁卫.PMN-PZT系压电陶瓷的性能和掺杂改性研究.硕士学位论文,山东大学,2014.
25 Tipakontitikul R, Suwan Y, Niyompan A. Ferroelectrics,2009,381,144.
26 刘亚威.铌锰—锆钛酸铅压电陶瓷材料的研究.硕士学位论文,天津大学,2009.
27 Li L, Yao Y, Han M. Ferroelectrics,1980,28(1),403.
28 祝兰.PMS-PZT压电陶瓷的制备及性能研究.硕士学位论文,暨南大学,2010.
29 Rahed A I, Shashank P, Ahmed A. Journal of Materials Sciences,2007,42,10053.
30 Deng Y, Zhou D, Zhuang Z. Journal of Wuhan University of Technology-Materials Science Edition,2007,22(4),722.
31 Li H, Yang Z, Wei L, et al. Materials Research Bulletin,2009,44,638.
32 Liao Q, Chu X, Zhang J, et al. In: Proceedings of the 3rd International Symposium on Advances in Functional Materials. Changchun, China,2012.
33 Du H, Pei Z, Zhou W, et al. Materials Science and Engineering A,2006,421,286.
34 杜景红,孙加林,史庆南,等.昆明理工大学学报,2002,27(6),32.
35 宗喜梅,杨祖培,李慧.功能材料,2006,37(3),383.
36 刘少恒,晁小练,皇晓辉,等.陕西师范大学学报,2012,40(3),58.
37 Yoo J H,Yoon H S,Yoon K H,et al. In: Ultrasonics Symposium 1998. Sendai, Japan,1998.
38 Yoo J H,Lee Y W,Yoon K H,et al.Japanese Journal of Applied Physics,2001,40(5A),3256.
39 沈建兴,李传山,张雷.压电与声光,2008,30(2),193.
40 贺连星,高敏,李承恩.无机材料学报,2001,16(2),337.
41 乔骄阳,林书玉.陕西师范大学学报(自然科学版),2016,44(1),43.
42 Du Jinlong, Hu Junhui, KingJet Tseng.Ceramics International,2004,30,1797.
43 左斌,邵华. 机械设计与研究,2013,29(2),26.
44 胡淑芳,上官明宇.声学技术,2013,32(5),436.
45 秦雷, 鲜晓军, 贾俊博,等.压电与声光,2018,30(4),501.
46 Pang Zongqiang, Zhang Yue, Zhou Zeqing, et al. Nanotechnology and Precision Engineering,2018,1(1),23.
47 Liu Lige, Ge Weifeng, Meng Wenjie,et al. Review of Scientific Instruments,2018,89,033704.
48 宋晓龙.基于压电驱动的网孔型超声雾化器研究.硕士学位论文,南京航空航天大学,2017.