INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
An Unstable Eutectic Growth Mode: Research Progress of Tilt Eutectic Growth |
WEI Cen, LI Xiangming
|
School of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093 |
|
|
Abstract The preparation process of eutectic structure refers to the process of precipitating two or more different solid phases closely adjacent to each other during cooling in the alloy melt with a certain concentration of solute. If the two closely adjacent two or many different solid phase processes are formed, at the same time, the precipitated solid can be distributed regularly in the matrix, a variety of eutectic material with special properties can be prepared. And eutectic structure materials are widely used in aerospace and nuclear industry. On the basis of eutectic theory, some scientists have proposed a new process of preparing regular porous metal structure by directional solidification method, and the unique mechanical and thermal properties of porous metal indicate that it has a broad application prospect. The essential problem in the preparation of eutectic microstructure is that how to effectively control the solidification process of eutectic under given preparation conditions. Dynamics of eutectic solidification process, formation and evolution of eutectic solid-liquid interface and solid-solid in-terface are two basic problems in eutectic solidification, they constitutes an indivisible nonlinear dynamical system. Meanwhile, they determine the quality and properties of final product materials,so they are needed to be studied deeply. The key factor of eutectic growth theory is to explore the coupling behavior of the two in eutectic growth. Therefore, the theoretical results of eutectic growth will enable people to understand the formation of microstructures and the evolution of interfaces. So, we can better control the solidification process and obtain better mechanical properties of the product. It has been known for a long time that, the directional solidification of eutectic alloys at near eutectic compositions, the theoretical orientation of lamellar eutectic growth is consistent with that of temperature gradient. But there are certain growth conditions, the eutectic solid-liquid interface will move along in the vertical direction of the pulling speed, so it will result in a certain angle of inclination between the solid-solid interface and the traction velocity, Thus, another mode of eutectic growth is produced: inclined eutectic growth. The theory of eutectic solidification can be further improved, the properties of eutectic materials can be improved and the problem of preparing eutectic materials in industrial production can be solved, if we study the tilt growth of eutectic. A large number of theoretical and experimental studies have been carried out on the influence factors and morphology of the layered eutectic tilt growth. In this paper, the research progress and methods of stratified eutectic slant growth from the development of oblique eutectic growth and orientation solidification technology are described. The influence of various parameters and anisotropic on the morphology of tilt eutectic growth is summarized. We point out some questions in current researches, and propose the new perspectives for future research.
|
Published: 02 July 2019
|
|
Fund:This work was supported by the National Natural Science Foundation of China (51561016), and Yunnan Science and Technology Program (2016FB089). |
|
|
[1] |
Evans A G, Hutchinson J W, Ashby M F. Progress in Materials Science,1998,43(3),171.
|
[2] |
Hyun S K, Murakami K, Nakajima H. Materials Science & Engineering A,2001,299(1),241.
|
[3] |
Nakajima H, Fabrication H. Proceedings of the Japan Academy, Series B,2010,86(9),884.
|
[4] |
Karami M, Mahmudi R. Materials Science & Engineering A,2013,576(4),156.
|
[5] |
Zhu T, Cui C, Zhang T, et al. Materials & Design,2014,57,245.
|
[6] |
Qu Z, Wu L, Wu R, et al. Materials & Design,2014,54(2),792.
|
[7] |
Mahmudi R, Shalbafi M, Karami M, et al. Materials & Design,2015,75(2),184.
|
[8] |
Dong H W, Wang L M, Liu K, et al. Materials & Design,2016,90,157.
|
[9] |
Collinsj B, Levin H. Physical Review B,1985,31(9),6119.
|
[10] |
Langer J S, Müller-Krumbhaar H. Acta Metallurgica,1978,26(11),1689.
|
[11] |
Gaginal P G, Fife P C. Physical Review B,1986,33(11),7792.
|
[12] |
Gaginal P G, Fife P C. Physical Review B,1986,34(7),4940.
|
[13] |
Fife P C, Gill G S. Physica D: Nonlinear Phenomena,1989,35(1),267.
|
[14] |
Fife P C, Gill G S. Physical Review A,1991,43(2),843.
|
[15] |
Langer J S. Physical Review Letters,1980,44(15),1023.
|
[16] |
Akamatsu S, Bottin-Rousseau S. Physical Review Letters,2004,93(17),175701.
|
[17] |
Andrea Parisi. Acta Materialia,2008,56(6),1348.
|
[18] |
Parisi A, Plapp M. Materials Science,2010,90,26010.
|
[19] |
Mikael Perrut, Sabine Bottin-Rousseau. Acta Materialia,2013,61(18),6802.
|
[20] |
Lahiri A, Tiwary C, Chattopadhyay K, et al. Computational Materials Science,2017,130,109.
|
[21] |
Noubary K D, Kellner M, Steinmetz P, et al. Computational Materials Science,2017,138,403.
|
[22] |
Akamatsu S, Ihle T. Physical Review E,1997,56(56),4479.
|
[23] |
Alain K, Armand S. Metallurgical & Materials Transactions A,1996,27(3),635.
|
[24] |
Akamatsu S, Faivre G. Physical Review E,2000,61,3757.
|
[25] |
Ghosh S, Choudhury A, Plapp M, et al. Physical Review E,2015,91(2),022407.
|
[26] |
Nestler B, Wheeler A. Physica D: Nonlinear Phenomena,2000,138(1),114.
|
[27] |
Faivre G, Mergy J. Physical Review A,1992,45(10),7320.
|
[28] |
Faivre G, Mergy J. Physical Review A,1992,46(2),963.
|
[29] |
Faivre G. Journal of Crystal Growth,1996,166(1-4),29.
|
[30] |
Akamatsu S, Faivre G. Physical Review E,2000,61(4 Pt A),3757.
|
[31] |
Witusiewiczn V T, Sturz L, Hecht U, et al. Journal of Crystal Growth,2014,386(386),69.
|
[32] |
Plapp M, Bottin-Rousseau S, Faivre G, et al. Comptes Rendus Mécanique,2017,345(1),56.
|
[33] |
Datye V, Langer J S. Physical Review B,1981,24(8),4155.
|
[34] |
Karma A. Physical Review Letters,1987,59(1),71.
|
[35] |
Karma A, Sarkissian A. Metallurgical & Materials Transactions A,1996,27(3),635.
|
[36] |
Ginibre M, Akamatsu S, Faivre G. Physical Review E,1997,56(1),780.
|
[37] |
Akamatsu S, Sabine B R, Faivre G. Physical Review Letters,2004,93(17),175701.
|
[38] |
Faivre G, Cheveigne D E, Guthmann C, et al. Europhysics Letters,1989,9,779.
|
[39] |
Coullet P, Goldstein R E, Gunaratne G H. Physical Review Letters,1989,63(18),1954.
|
[40] |
Kassner K, Misbah C. Physical Review A,1992,45(10),7372.
|
[41] |
Akamatsu S, Bottin-Rousseau S, Serefoglu M, et al. Acta Materialia,2012,60(6-7),3199.
|
[42] |
Faivre G, Bottin-Rousseau S, Akamatsu S. Comptes Rendus-Physique,2013,14(2-3),149.
|
[43] |
Akamatsu S, Bottin-Rousseau S, Serefoglu M, et al. Acta Materialia,2012,60(6-7),3206.
|
[44] |
Bottin-Rousseau S, Serefoglu M, Akamatsu S, et al. Materials Science and Engineering,2011,27,012088.
|
[45] |
Ghmadh J, Debierre J M, Deschamps J, et al. Acta Materialia,2014,74(4),255.
|
[46] |
Collins J B, Levin H. Physical Review B,1985,31(9),6119.
|
[47] |
Langer J S. Review of Modern Physics,2007,52(1),1.
|
[48] |
Gaginal P G, Fife P C. Physical Review B,1986,33(11),7792.
|
[49] |
Xu J J. Theoretical guidance of solidification kinetics and interface stability, Science Press, China,2006(in Chinese).
|
|
徐鉴君.凝固过程动力学与交界面稳定性理论导引,科学出版社,2006.
|
[50] |
Gaginal P G, Fife P C. Physical Review B,1986,34(7),4940.
|
[51] |
Gaginal P G. Physical Review A,1989,39(11),5887.
|
[52] |
Fife P C, Gill G S. Physica D: Nonlinear Phenomena,1989,35(1),267.
|
[53] |
Fife P C, Gill G S. Physical Review A,1991,43(2),843.
|
[54] |
Supriyo Ghosh, Mathis Plapp. Acta Materialia,2017,140,140.
|
[55] |
Somboonsuk K, Mason J T, Trivedi R. Metallurgical & Materials Transactions A,1984,15(6),967.
|
[56] |
Seetharaman V, Trivedi R. Metallurgical Transactions A,1988,19(12),2955.
|
[57] |
Mergy J, Faivre G, Guthmann C, et al. Journal of Crystal Growth,1993,134(3-4),353.
|
[58] |
Borzsonyi T, Toth-Katona T, Buka A, et al. Physical Review E,2000,62,7817.
|
[59] |
Akamatsu S, Plapp M, Faivre G, et al. Physical Review E,2002,66(1),030501.
|
[60] |
Akamatsu S, Bottin-Rousseau S, Perrut M, et al. Journal of Crystal Growth,2007,299(2),418.
|
[61] |
Hunt J D, Jackson K A. Transactions of the Metallurgical Society of AIME,1966,236(6),843.
|
[62] |
Jackson K A, Hunt J D. Dynamics of Curved Fronts,1988,236(8),363.
|
[63] |
Zener C. Transactions of the Metallurgical Society of AIME,1946,167(1946),550.
|
[64] |
Utter B, Bodenschatz E. Physical Review E,2002,66(1),051604.
|
[1] |
YANG Jinxiang, SHI Shuang, JIANG Dachuan, LI Xu, LI Pengting, TAN Yi, YAO Yujie, CHI Ming, ZHANG Runde, ZHANG Jianshuai. Effect of Temperature on Solidification Rate During Directional Solidification of Multicrystaline Silicon[J]. Materials Reports, 2019, 33(z1): 28-32. |
|
|
|
|