METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Numerical Simulation of Arc Physical Behavior in Gas Metal Arc Welding with a Single Cable-typed Wire |
PU Juan, XIE Yiru, HU Qingxian, XU Guoxiang, ZHU Caichen
|
Provincial Key Laboratory of Advanced Welding Technology, School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003 |
|
|
Abstract This paper reports the numerical simulation for the arc physical behavior in gas metal arc welding (GMAW) with a single cable-typed wire,using a three-dimensional numerical model of arc established by Gambit software. We explored from the simulation results the welding current dependences of the distribution characteristics with respect to current density, electromagnetic field, temperature field, velocity field and pressure field of GMAW arc. The results showed that all the maximums in current density, electromagnetic field, temperature field, velocity field and pressure field had obvious positive correlation with the welding current. It was found that the maximum current density and highest temperature of arc occurred on the tip of single cable-typed wire, while the maximum velocity of plasma arc was located on the arc column area. Meanwhile, the transfer of location of the highest arc pressure from velocity inlet to wire tip induced by the increasing welding current was also observed. Under the same welding process parameter, the accuracy and validity of the established simulation model could be verified by a good coincidence between the simulated arc shape and the actual arc shape taken by high-speed camera system.
|
Published: 11 March 2019
|
|
Fund:This work was financially supported by the National Natural Science Foundation Youth Fund of China (51505200), the National Natural Science Foundation of China (51675249), the Doctoral Research Initiation Fund of Jiangsu University of Science and Technology and Innovation Program for Undergraduates of Jiangsu University of Science and Technology. |
|
|
1 |
胡特生.电弧焊,机械工业出版社,2002.2 殷树言.气体保护焊工艺基础及应用,机械工业出版社,2012.3 Herold H, Irmer W, Probst T. Welding and Cutting,1997,5,32.4 Yao S, Qian W F, Qin X M. Welding Technology,2002,31(B12),43(in Chinese).姚舜,钱伟方,秦笑梅.焊接技术,2002,31(B12),43.5 Zhao B, Fan C L, Yang C L, et al. Welding and Joining,2008(2),11(in Chinese).赵博,范成磊,杨春利,等.焊接,2008(2),11.6 Fang C F, Chen Z W, Xu G X, et al. Acta Metallurgica Sinica,2012,48(11),1299(in Chinese).方臣富,陈志伟,胥国祥,等.金属学报,2012,48(11),1299.7 Fang C F, Bin H E, Zhao Z C, et al. Journal of Iron and Steel Research,2013,20(4),81.8 Xiao G D. Study of high efficiency, energy saving and weld formation in submerged arc welding using a cable-typed welding wire.Master’s Thesis, Jiangsu University of Science and Technology,China,2015(in Chinese).肖国栋.缆式焊丝埋弧焊高效节能及焊缝成形研究.硕士学位论文,江苏科技大学,2015.9 Zhou H Y. Study of coupling arc produced by multi-arc rotation and its temperature field in CO2 gas metal arc welding using a cable-typed wel-ding wire.Master’s Thesis, Jiangsu University of Science and Technology, China,2012(in Chinese).周航宇.缆式焊丝CO2气保焊多弧旋转耦合电弧及温度场研究.硕士学位论文,江苏科技大学,2012.10 Fang C F, Yang Z D, Chen Y, et al. Transactions of the China Welding Institution,2016,37(11),1(in Chinese).方臣富,杨志东,陈勇,等.焊接学报,2016,37(11),1.11 Fang C F, Wang H S, Liu C, et al. Transactions of the China Welding Institution,2012,33(5),17(in Chinese).方臣富,王海松,刘川,等.焊接学报,2012,33(5),17.12 Wang X W. The numerical simulation of metal transfer in MIG based on magnetron-welding technology.Master’s Thesis, Nanchang Hangkong University,China,2013(in Chinese).王小伟.基于磁控技术MIG焊接熔滴行为的模拟研究.硕士学位论文,南昌航空大学,2013.13 Quinn T P, Szanto M, Gilad I, et al. Science and Technology of Welding and Joining,2013,10(1),113.14 Nemchinsky V. Journal of Physics D: Applied Physics,2011,44(44),1.
|
|
|
|