TNW700高温钛合金热过程中的相组织变化分析

doi:10.11896/j.issn.1005-023X.2018.20.016

Abstract
Figure/Table
References
Related Citation (7)

Download:

Full Text ( PDF ) (4428KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper, the phase and element distribution of TNW700 titanium alloys were analyzed by means of EPMA (Electron probe microanalysis), SEM, EDS, etc. The phase transition and surface oxides of the alloy during heating process and thermal exposure were analyzed by using in-situ X-ray diffraction (XRD) technique. The result showed that the TNW700 titanium alloy is a high aluminum-equivalent alloy whose creep durability can be improved by the synergistic effect of precipitation strengthening of silicon and α₂ phase. During the heating process, zirconium begins to dissolve into titanium forming solid solution at 600 ℃, and reaches saturation at 900 ℃ saturated. TiC and Ti₃Al phases increase with the rising temperature exceeding 880 ℃. 700 ℃thermal exposure test confirmed that the generated surface oxides are mainly Ti₆O and Ti₃O with a low increment rate and only a little TiO₂ and Al₂O₃ generated. It seems that the TNW700 alloy exhibits a satisfactory short-term resistance to high-temperature surface oxidation.

Key words： TNW700 high-temperature titanium alloy in-situ X-ray diffraction phase transition

Published: 22 November 2018

CLC number:

TG44

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YAO Gang
	FU Mingjie

Cite this article:

YAO Gang,FU Mingjie. Analysis of Phase Change in the Thermal Process of TNW700 High-temperature Titanium Alloy[J]. Materials Reports, 2018, 32(20): 3584-3589.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.20.016 OR http://www.mater-rep.com/EN/Y2018/V32/I20/3584

1 Zhang H L. Microstructure and mechanical properties of a high temperature alloy for short-term use at 700 ℃ [D]. Harbin: Harbin Institute of Technology,2012(in Chinese).
张会亮.700 ℃短时用高温钛合金的组织性能研究[D].哈尔滨:哈尔滨工业大学,2012.
2 Mao X N, Zhao Y Q, Yang G J. Development situation of the overseas titanium alloys used for aircraft engine [J]. Rare Metals Letters,2007,26(5):1(in Chinese).
毛小南,赵永庆,杨冠军.国外航空发动机用钛合金的发展现状[J].稀有金属快报,2007,26(5):1.
3 Wang Q J, Liu J R, Yang R. High temperature titanium alloys: Status and perspective [J]. Journal of Aeronautical Materials,2014,34(4):1(in Chinese).
王清江,刘建荣,杨锐.高温钛合金的现状与前景[J].航空材料学报,2014,34(4):1.
4 Cai J M, Cao C X. Alloy design and application expectation of a new generation 600 ℃ high temperature titanium alloy [J]. Journal of Aeronautical Materials,2014,34(4):27(in Chinese).
蔡建明,曹春晓.新一代600 ℃高温钛合金材料的合金设计及应用展望[J].航空材料学报,2014,34(4):27.
5 Lin P, Feng A H, Yuan S J, et al. Microstructure and texture evolution of a near-α titanium alloy during hot deformation[J]. Material Science & Engineering,2013,56(3):16.
6 Fu M J, Zhang T, Han X Q, et al. Super plastic deformation beha-vior of TNW700 titanium alloy sheet[J].Chinese Journal of Rare Metals,2016,40(1):1(in Chinese).
付明杰,张涛,韩秀全,等.TNW700高温钛合金板材超塑变形行为研究[J].稀有金属,2016,40(1):1.
7 Liu B S, Wu W. Experimental research on thermal forming limit of TNW700[J].Forging& Stamping Technology,2015,40(10):20(in Chinese).
刘宝胜,吴为.TNW700钛合金热成形极限试验研究[J].锻压技术,2015,40(10):20.
8 Dong F, He G Q, Zhang G T. Research development of the effect of Si element on titanium alloy[J]. Heat Treatment of Metals,2007,32(11):5(in Chinese).
董飞,何国强,张贵田.合金元素Si在钛合金中作用的研究进展[J].金属热处理,2007,32(11):5.
9 Hui S X, Zhang Z, Xiao J S, et al. Progress of research on thermal stability of high temperature titanium alloys[J]. Chinese Journal of Rare Metals,1999,23(2):125(in Chinese).
惠松骁,张翥,萧今声,等.高温钛合金热稳定性研究进展[J].稀有金属,1999,23(2):125.
10 Zhang S Z, Wang B, Liu Z Q, et al. Effect of carbon on microstructures and mechanical properties of Ti-60 high-temperature titanium alloy[J].Chinese Journal of Materials Research,2007,21(4):433(in Chinese).
张尚洲,王波,刘子全,等.碳对高温钦合金Ti-60组织和性能的影响[J].材料研究学报,2007,21(4):433.
11 Li D, Wan X J. On the thermal stability of Ti alloys[J]. Acta Me-tallurgica Sinica,1984,20(6):391(in Chinese).
李东,万晓景.钛合金热稳定性研究[J].金属学报,1984,20(6):391.
12 Zhang S Z, Liu G F, Wang G D, et al.Effect of carbon on microstructural stability of high-temperature titanium alloy[J].Transactions of Materials and Heat Treatment,2009,30(5):149(in Chinese).
张尚洲,刘高峰,王广东,等.碳对高温钛合金组织稳定性的影响[J].材料热处理,2009,30(5):149.