同轴送粉金属激光3D打印熔池流动、成分分布以及组织生长数值模拟的研究进展

doi:10.11896/j.issn.1005-023X.2018.21.010

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (5284KB)
Export: BibTeX | EndNote (RIS)

Abstract In the exceptional historical opportunity of “Made in China 2025”, the “National Advanced Manufacturing Strategic Plan” of the United States, the “Amazing Plan” of European Space Agency, the Japanese “Additive Manufacturing Research Program”, the “Industrial Additive Manufacturing Project” in Singapore and the EU “3D Printing Standardization Roadmap”, the metal laser 3D printing has become the focus of research among scholars at home and abroad. Metal laser 3D printing is a technique that integrate computer-aided design, material processing and forming technology, and manufacture products by stacking and solidifying special materials through software and numerical control system based on the digital model files. Different from traditional machining mode of cutting and assembling raw materials, it is a innovative technique that manufacture products from scratch based on the materials accumulation principle. Just because of the technological characteristics of addictive manufacturing, it has attracted worldwide attention, and will evoke a series of profound changes to the traditional manufacturing industry.The coaxial powder feeding type me-tal laser 3D printing technique possesses broad application prospects in the field of aviation, aerospace, transportation, medical treatment and energy, because of its large forming size, wide range of available materials and excellent material properties of shaped parts, which has become the main stream technology of additive manufacturing.
There are complex dynamic physical metallurgical processesincluding heat transfer, convection, mass transfer, gas-liquid interface metallurgy and solid-liquid interface diffusion in the 3D printing pool. The fluid dynamic behavior of the weld pool directly affects the homogeneity and compactness of the material structure. Therefore, there still exist several key problems to be figured out in me-tal laser 3D printing, which are the simulation of the fluid dynamic process of the weld pool by fluid mechanics, establishment of three-dimensional unsteady model of the temperature and flow field of the weld pool, the influence of buoyancy, surface tension, powder impact force on the temperature field, velocity field and molten pool shape of 3D printing.
Numerical simulation is one of the important methods to study the dynamic processin the welding pool of co-axial powder feeding metal laser 3D printing. At present, research on the numerical simulations of coaxial powder laser metal 3D printing and laser wel-ding have included more comprehensive multiscale numerical models, such as light-powder coupling numerical model of molten pool, the interface tracing model of gas-liquid interface and solid-liquid mixed zone in molten pool, the temperature field and fluid flow analysis model of instantaneous variation of molten pool, the mesoscopic model for the distribution of alloying elements in the molten pool and the model for the morphology of the molten pool and the cellular automata for microstructure solidification based on the phase field method.
This article mainly elaborates the domestic and international researches on simulation of the coaxial powder metal laser 3D prin-ting, which mainly focus on the analysis of thermal field and flow field with instantaneous variations in the molten pool, the distribution process of the alloying elements, the morphology of the molten pool and solidification of the microstructure during the 3D prin-ting process. Owing to the universal applicability of numerical simulation method and in order to introduce the numerical simulation methods related to coaxial powder feeding metal laser 3D printing technique in a more comprehensive manner, this article also involves a small amount of numerical simulation about coaxial powder laser cladding and laser arc welding.

Key words： coaxial powder feeding 3D printing molten pool flow composition distribution numerical simulation

Published: 21 November 2018

CLC number:

TG495

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	AN Xiaolong
	LYU Yunzhuo
	QIN Zuoxiang
	LU Xing

Cite this article:

AN Xiaolong,LYU Yunzhuo,QIN Zuoxiang, et al. Progress in Numerical Simulation of Laser 3D Printing of Metal by Coaxial Powder Feeding: Flow in Welding Pool, Composition Distribution and Tissue Growth[J]. Materials Reports, 2018, 32(21): 3743-3753.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.21.010 OR http://www.mater-rep.com/EN/Y2018/V32/I21/3743

1 Lu Bingheng, Li Dichen.Technical development of additive manufacturing (3D printing)[J].Machinery Manufacturing and Automation,2013,42(4):1(in Chinese).
卢秉恒,李涤尘.增材制造(3D打印)技术发展[J].机械制造与自动化,2013,42(4):1.
2 Keicher D M, Smugeresky J E, Romero J A, et al.Using the laser engineered net shaping (LENS) process to produce complex components from a CAD solid model[C]∥Proceedings of the SPIE—The International Society for Optical Engineering. Lasers as Tools for Manufacturing. Orlando,1997.
3 Huang Weidong, Li Yanmin, Feng Liping, et al.Laser solid for-ming of metal powder materials[J].Journal of Material Engineering,2002(3):40(in Chinese).
黄卫东,李延民,冯莉萍,等.金属材料激光立体成形技术[J].材料工程,2002(3):40.
4 Jia Wenpeng, Lin Xin, Chen Jing, et al.Temperature/stress field numerical simulation of hollow blace produced by laser rapid forming[J].Chinese Lasers,2007,34(9):1308(in Chinese).
贾文鹏,林鑫,陈静,等.空心叶片激光快速成形过程的温度场/应力场数值模拟[J].中国激光,2007,34(9):1308.
5 黄卫东,林鑫,陈静,等.激光立体成形[M].西安:西北工业大学出版社,2007:225.
6 David S A, DebRoy T. Current issues and problems in welding science[J].Science,1992,257(12):497.
7 Qi H, Mazumder J, Green L, et al.Laser beam analysis in direct metal deposition process[J].Journal of Laser Applications,2005,17(3):136.
8 Tang Q, Pang S, Chen B, et al.A three dimensional transient model for heat transfer and fluid flow of weld pool during electron beam freeform fabrication of Ti-6-Al-4-V alloy[J].International Journal of Heat and Mass Transfer,2014,78(6):203.
9 Hu Y, He X, Yu G, et al.Heat and mass transfer in laser dissimilar welding of stainless steel and nickel[J].Applied Surface Science,2012,258(15):5914.
10 Kumar A, Roy S.Effect of three-dimensional melt pool convection on process characteristics during laser cladding[J].Computational Materials Science,2009,46(2):495.
11 Gan Z, et al.Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel[J].International Journal of Heat and Mass Transfer,2017,104(1):28.
12 Gan Zhengtao, Yu Gang, He Xiuli, et al.Surface-active element transport and its effect on liquid metal flow in laserassisted additive manufacturing[J].International Communications in Heat and Mass Transfer,2017,86(11):206.
13 Acharyar, Bansalr, Gambone J J, et al. A coupled thermal, fluid flow, and solidification model for the processing of single-crystal alloy CMSX-4 through scanning laser epitaxy for turbine engine hot-section component repair (Part Ⅰ)[J].Metallurgical and Materials Transactions B,2014,45(6):2247.
14 Manvatkar V, de A Debroyt. Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process[J].Materials Science and Technology,2015,31(8):924.
15 Chatterjee D, Chakrabortys. A hybrid lattice Boltzmann model for solidliquid phase transition in presence of fluid flow[J].Physics Letters A,2006,351(4-5):359.
16 Geiger M, Leitz K H, Koch H, et al.A 3D transient model of keyhole and melt pool dynamics in laser beam welding applied to the joining of zinc coated sheets[J].Production Engineering,2009,3(2):127.
17 Zhao Lin, Tsukamoto Susumu, Arakane Goro,et al.Distribution of wire feeding elements in laser-arc hybrid welds[J].Chinese Journal of Lasers,2015(4):210(in Chinese).
赵琳,塚本进,荒金吾郎,等.激光-电弧复合焊焊缝合金元素分布的研究[J].中国激光,2015(4):210.
18 Cho W, Na S,Cho M, et al.Numerical study of alloying element distribution in CO₂ laser-GMA hybrid welding[J].Computational Materials Science,2010,49(4):792.
19 Wei H L, Mazumder J, Debroyt. Evolution of solidification texture during additive manufacturing[J].Scientific Reports,2015,5:16446.
20 Zhou J T H L. Investigation of mixing and diffusion processes in hybrid spot laser-mig keyhole welding[J].Journal of Physics D: Applied Physics,2009,42(9):95502.
21 Fallah V, Amoorezaei M, Provatas N, et al.Phase-field simulation of solidification morphology in laser powder deposition of Ti-Nb alloys[J].Acta Materialia,2012,60(4):1633.
22 Yin H, Felicelli S D.Dendrite growth simulation during solidification in the LENS process[J].Acta Materialia,2010,58(4):1455.
23 Wei Lei, Lin Xin,Wang Meng, et al.Cellular automaton simulation of the molten pool of laser solid forming process[J].Acta Physica Sinica,2015,64(1):348(in Chinese).
魏雷,林鑫,王猛,等.激光立体成形中熔池凝固微观组织的元胞自动机模拟[J].物理学报,2015,64(1):348.