MATERIALS AND SUSTAINABLE DEVELOPMENT: ADVANCED MATERIALS FOR CLEAN ENERGY UTILIZATION |
|
|
|
|
|
A Review on Cathode Interfacial Layers of Organic Solar Cells |
ZHOU Dan1, QIN Yuancheng1, XU Haitao2, LI Mingjun1
|
1 School of Environmental and Chemical Engineering, Nanchang Hangkong University, Nanchang 330063; 2 College of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063 |
|
|
Abstract Bulk heterojunction polymer solar cells (PSCs) have attracted enormous attention due to their various advantages of low-cost, favorable flexibility and feasibility for large-scales roll-to-roll fabrication. Considerable progress has been made in researches of PSCs in recent years. Nevertheless, several scientific issues and challenges of PSCs like poor charge carrier separation, transfer and collection, have been hindering their application in large-scale commercial production. Stable and effective interfacial contact plays a critical role in enhancing the performance of PSCs. This article summarizes the functions and classifications of the interfacial layer in polymer solar cells, including inorganic interlayers, fullerene derivatives, water/alcohol-soluble neutral conjugated polymers, water/alcohol-soluble ionic conjugated polymers electrolyte, hyperbranched small molecule electrolytes and perylene diimide derivatives.
|
Published: 01 August 2018
|
|
|
|
1 Zhao W, Li S, Yao H, et al. Molecular optimization enables over 13% efficiency in organic solar cells[J].Journal of the American Chemical Society,2017,139(21):7148. 2 Bulliard X, Ihn S G, Yun S, et al. Enhanced performance in polymer solar cells by surface energy control[J].Advanced Functional Mate-rials,2010,20(24):4381. 3 Chen L M, Xu Z, Hong Z, et al. Interface investigation and engineering-achieving high performance polymer photovoltaic devices[J].Journal of Materials Chemistry,2010,20(13):2575. 4 Duan C, Zhong C, Liu C, et al. Highly efficient inverted polymer solar cells based on an alcohol soluble fullerene derivative interfacial modification material[J].Chemistry of Materials,2012,24(9):1682. 5 Lee R H, Syu J Y, Huang J L. Photovoltaic properties of the polymer solar cells comprising crosslinked maleimide polymers and fullerene-derivative PCBM[J].Polymers for Advanced Technologies,2011,22(12):2110. 6 Lai Y Y, Cheng Y J, Hsu C S. Applications of functional fullerene materials in polymer solar cells[J].Energy & Environmental Science,2014,7(6):1866. 7 Mei Q, Li C, Gong X, et al. Enhancing the performance of polymer photovoltaic cells by using an alcohol soluble fullerene derivative as the interfacial layer[J].ACS Applied Materials & Interfaces,2013,5(16):8076. 8 He C, Zhong C, Wu H, et al. Origin of the enhanced open-circuit voltage in polymer solar cells via interfacial modification using conjugated polyelectrolytes[J].Journal of Materials Chemistry,2010,20(13):2617. 9 Zhang L, He C, Chen J, et al. Bulk-heterojunction solar cells with benzotriazole-based copolymers as electron donors: Largely improved photovoltaic parameters by using PFN/Al bilayer cathode[J].Macromolecules,2010,43(23):9771. 10 He Z, Zhang C, Xu X, et al. Largely enhanced efficiency with a PFN/Al bilayer cathode in high efficiency bulk heterojunction photovoltaic cells with a low bandgap polycarbazole donor[J].Advanced Materials,2011,23(27):3086. 11 Gu C, Chen Y, Zhang Z, et al. Achieving high efficiency of PTB7-based polymer solar cells via integrated optimization of both anode and cathode interlayers[J].Advanced Energy Materials,2014,4(8):1301771. 12 Duan C, Wang L, Zhang K, et al. Conjugated zwitterionic polyelectrolytes and their neutral precursor as electron injection layer for high-performance polymer light-emitting diodes[J].Advanced Materials,2011,23(14):1665. 13 Li Y L, Cheng Y S, Yeh P N, et al. Structure tuning of crown ether grafted conjugated polymers as the electron transport layer in bulk-heterojunction polymer solar cells for high performance[J].Advanced Functional Materials,2014,24(43):6811. 14 Dong Y, Hu X, Duan C, et al. A series of new medium-bandgap conjugated polymers based on naphtho[1,2-c:5,6-c]bis(2-octyl-[1,2,3]triazole) for high-performance polymer solar cells[J].Advanced Materials,2013,25(27):3683. 15 He Z, Zhong C, Su S, et al. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure[J].Nature Photonics,2012,6(9):591. 16 Albrecht S, Janietz S, Schindler W, et al. Fluorinated copolymer PCPDTBT with enhanced open-circuit voltage and reduced recombination for highly efficient polymer solar cells[J].Journal of the American Chemical Society,2012,134(36):14932. 17 Blom P W M, Mihailetchi V D, Koster L J A, et al. Device physics of polymer: Fullerene bulk heterojunction solar cells[J].Advanced Materials,2007,19(12):1551. 18 Park S H, Roy A, Beaupré S, et al. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%[J].Nature Photonics,2009,3(5):297. 19 Zhao Y, Xie Z, Qin C, et al. Enhanced charge collection in polymer photovoltaic cells by using an ethanol-soluble conjugated poly-fluorene as cathode buffer layer[J].Solar Energy Materials and Solar Cells,2009,93(5):604. 20 Liao S H, Li Y L, Jen T H, et al. Multiple functionalities of poly-fluorene grafted with metal ion-intercalated crown ether as an electron transport layer for bulk-heterojunction polymer solar cells: Optical interference, hole blocking, interfacial dipole, and electron conduction[J].Journal of the American Chemical Society,2012,134(35):14271. 21 Xu X, Cai W, Chen J, et al. Conjugated polyelectrolytes and neutral polymers with poly (2, 7-carbazole) backbone: Synthesis, characterization, and photovoltaic application[J].Journal of Polymer Science Part A: Polymer Chemistry,2011,49(5):1263. 22 Sun J, Zhu Y, Xu X, et al. High efficiency and high Voc inverted polymer solar cells based on a low-lying HOMO polycarbazole donor and a hydrophilic polycarbazole interlayer on ITO cathode[J].The Journal of Physical Chemistry C,2012,116(27):14188. 23 Guan X, Zhang K, Huang F, et al. Amino N-oxide functionalized conjugated polymers and their amino-functionalized precursors: New cathode interlayers for high-performance optoelectronic devices[J].Advanced Functional Materials,2012,22(13):2846. 24 Zhu Y, Xu X, Zhang L, et al. High efficiency inverted polymeric bulk-heterojunction solar cells with hydrophilic conjugated polymers as cathode interlayer on ITO[J].Solar Energy Materials and Solar Cells,2012,97:83. 25 Tang Z, Andersson L M, George Z, et al. Interlayer for modified cathode in highly efficient inverted ITO-free organic solar cells[J].Advanced Materials,2012,24(4):554. 26 Oh S H, Na S I, Jo J, et al. Water-soluble polyfluorenes as an interfacial layer leading to cathode-independent high performance of organic solar cells[J].Advanced Functional Materials,2010,20(12):1977. 27 Zhang Y Y,Wang Y H,Lu Y Q,et al. Simulation optimizing of bifacial HIT solar cell on N-type substrate with AMPS[J].Journal of Chongqing University of Technology(Natural Science),2017,31(5):75(in Chinese). 张研研,王宇航,路钰清,等.利用AMPS对N型衬底上双面HIT太阳电池的模拟优化[J].重庆理工大学学报(自然科学版),2017,31(5):75. 28 Yang T, Wang M, Duan C, et al. Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte[J].Energy & Environmental Science,2012,5(8):8208. 29 Jo J, Pouliot J R, Wynands D, et al. Enhanced efficiency of single and tandem organic solar cells incorporating a diketopyrrolopyrrole-based low-bandgap polymer by utilizing combined ZnO/polyelectrolyte electron-transport layers[J].Advanced Materials,2013,25(34):4783. 30 Shi T, Zhu X, Yang D, et al. Thermal annealing influence on poly (3-hexyl-thiophene)/phenyl-C61-butyric acid methyl ester-based solar cells with anionic conjugated polyelectrolyte as cathode interface layer[J].Applied Physics Letters,2012,101(16):161602. 31 Chen Y, Jiang Z, Gao M, et al. Efficiency enhancement for bulk he-terojunction photovoltaic cells via incorporation of alcohol soluble conjugated polymer interlayer[J].Applied Physics Letters,2010,100(20):203304. 32 Rider D A, Worfolk B J, Harris K D, et al. Stable inverted polymer/fullerene solar cells using a cationic polythiophene modified PEDOT∶PSS cathodic interface[J].Advanced Functional Materials,2010,20(15):2404. 33 Zilberberg K, Behrendt A, Kraft M, et al. Ultrathin interlayers of a conjugated polyelectrolyte for low work-function cathodes in efficient inverted organic solar cells[J].Organic Electronics,2013,14(3):951. 34 Yao K, Chen L, Chen Y, et al. Influence of water-soluble polythiophene as an interfacial layer on the P3HT/PCBM bulk heterojunction organic photovoltaics[J].Journal of Materials Chemistry,2011,21(36):13780. 35 Duan C, Zhang K, Guan X, et al. Conjugated zwitterionic polyelectrolyte-based interface modification materials for high performance polymer optoelectronic devices[J].Chemical Science,2013,4(3):1298. 36 Chang Y M, Leu C Y. Conjugated polyelectrolyte and zinc oxide stacked structure as an interlayer in highly efficient and stable orga-nic photovoltaic cells[J].Journal of Materials Chemistry A,2013,1(21):6446. 37 Kesters J, Govaerts S, Pirotte G, et al. High-permittivity conjugated polyelectrolyte interlayers for high-performance bulk heterojunction organic solar cells[J].ACS Applied Materials & Interfaces,2016,8(10):6309. 38 Subbiah J, Mitchell V D, Hui N K C, et al. A green route to conjugated polyelectrolyte interlayers for high-performance solar cells[J].Angewandte Chemie,2017,129(29):8551. 39 Zhang K, Hu Z, Xu R, et al. High-performance polymer solar cells with electrostatic layer-by-layer self-assembled conjugated polyelectrolytes as the cathode interlayer[J].Advanced Materials,2015,27(24):3607. 40 Kang R, Oh S H, Kim D Y. Influence of the ionic functionalities of polyfluorene derivatives as a cathode interfacial layer on inverted po-lymer solar cells[J].ACS Applied Materials & Interfaces,2014,6(9):6227. 41 Ouyang X, Peng R, Ai L, et al. Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte[J].Nature Photo-nics,2015,9(8):520. 42 Zhang Z G, Qi B, Jin Z, et al. Perylene diimides: A thickness-insensitive cathode interlayer for high performance polymer solar cells[J].Energy & Environmental Science,2014,7(6):1966. |
|
|
|