Please wait a minute...
《材料导报》期刊社  2018, Vol. 32 Issue (7): 1139-1144    https://doi.org/10.11896/j.issn.1005-023X.2018.07.014
  材料综述 |
用于高频电机磁芯的金属软磁复合材料研究进展
李旺昌, 王兆佳, 李晶鑫, 车声雷
浙江工业大学材料科学与工程学院,磁电功能材料研究所,杭州 310000
A Review on Soft Magnetic Composites Applying to Magnetic Cores of High Speed Electric Motors
LI Wangchang, WANG Zhaojia, LI Jingxin, CHE Shenglei
Research Center of Magnetic and Electronic Materials, College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310000
下载:  全 文 ( PDF ) ( 1646KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 金属软磁复合材料(Soft magnetic composite, SMC)具有较高的电阻率和饱和磁感应强度,在高速电机、开关电源和电力工业等方面有广泛的应用,尤其是作为高速电机磁芯材料潜力巨大。研制能效更高、体积更小、应用范围更广的新型软磁复合材料成为当前一大热点。本文介绍了软磁复合材料的生产工艺、结构特征以及金属磁性材料和绝缘包覆材料,阐述了各要素对材料性能的影响,概述了软磁复合材料在电机中的应用,并综述了近几年软磁复合材料的发展。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
李旺昌
王兆佳
李晶鑫
车声雷
关键词:  软磁复合材料(SMC)  有机/无机包覆  高速电机  磁芯    
Abstract: Soft magnetic composites (SMCs) possess high electrical resistivity and saturation induction, which have found wide application in high speed electric motors, switching power supply and electric industry, with an especially pronounced potential as the candidate materials for magnetic cores. The hotspots in recent years have been focus on new-type soft magnetic composites with high energy efficiency, small volume and favorable adaptability. This paper introduces the manufacturing techniques, structural composition, core materials and coating materials of the soft magnetic composites, elaborates the performance’s dependences on these factors, introduces the application of soft magnetic composite materials in electric motor, and also offers a brief presentation of the recent advances in SMCs.
Key words:  soft magnetic composite(SMC)    organic/inorganic coating    high speed electric motor    magnetic core
               出版日期:  2018-04-10      发布日期:  2018-05-11
ZTFLH:  TB33  
  TM271.2  
基金资助: 国家自然科学基金(51602283); 浙江省自然科学基金(LQ15E020003)
通讯作者:  车声雷:通信作者,男,教授,主要从事无机功能材料(磁性材料、复合材料、电子陶瓷、粉体材料)和电子元器件的研究 E-mail:cheshenglei@zjut.edu.cn   
作者简介:  李旺昌:男,1986年生,副教授,主要从事金属软磁复合材料研究
引用本文:    
李旺昌, 王兆佳, 李晶鑫, 车声雷. 用于高频电机磁芯的金属软磁复合材料研究进展[J]. 《材料导报》期刊社, 2018, 32(7): 1139-1144.
LI Wangchang, WANG Zhaojia, LI Jingxin, CHE Shenglei. A Review on Soft Magnetic Composites Applying to Magnetic Cores of High Speed Electric Motors. Materials Reports, 2018, 32(7): 1139-1144.
链接本文:  
http://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2018.07.014  或          http://www.mater-rep.com/CN/Y2018/V32/I7/1139
1 Shokrollahi H, Janghorban K. Different annealing treatments for improvement of magnetic and electrical properties of soft magnetic composites[J].Journal of Magnetism and Magnetic Materials,2007,317(1-2):61.
2 Arkinson S. Soft magnetic PM materials show their strengths and uses[J].MPR,1998,53:12.
3 Lefebvre L P, Gélinas C, Mongeon P E. Consolidation of a lubricated ferromagnetic powder mix for AC soft magnetic applications[C]∥Bose A,German R M. Advances in Powder Metallurgy & Particulate Materials-2002.Princeton,NJ:MPIF,2002:86.
4 Laxminarayana T A, Manna S K, Fernandes B G,et al. Study of AC magnetic properties and core losses of Fe/Fe3O4-epoxy resin soft magnetic composite physics procedia,2015,75:1396.
5 Gheisari K, Javadpour S, Shokrollahi H, et al. Magnetic losses of the soft magnetic composites consisting of iron and Ni-Zn ferrite[J].Journal of Magnetism and Magnetic Materials,2008,320(8):1544.
6 Doering J, Steinborn G, Hofmann W. Torque, power, losses, and heat calculation of a transverse flux reluctance machine with soft magnetic composite materials and disk-shaped rotor[J].IEEE Tran-sactions on Industry Applications,2015,51(2):1494.
7 Frayman L, Quinn S, Quinn R, et al. Advanced soft magnetic composite materials for AC applications with reduced iron losses[J].Powder Metallurgy,2015,58(5):335.
8 Yang B, Wu Z, Zou Z, et al. High-performance Fe/SiO2 soft magnetic composites for low-loss and high-power applications[J].Journal of Physics D Applied Physics,2010,43(36):365003.
9 Erdal Bayramli, Özgür Gölgelioglu, Bülent Ertan H. Powder metal development for electrical motor applications[J].Journal of Materials Processing Technology,2005,161:83.
10Guo Y, Zhu J, Dorrell D G. Design and analysis of a claw pole permanent magnet motor with molded soft magnetic composite core[J].IEEE Transactions on Magnetics,2009,45(10):4582.
11Ishikawa T, Takahashi K, Ho Q V, et al. Analysis of novel brushless DC motors made of soft magnetic composite core[J].IEEE Transactions on Magnetics,2012,48(2):971.
12Nishiyama N, Tanimoto K, Makino A. Outstanding efficiency in energy conversion for electric motors constructed by nanocrystalline soft magnetic alloy “NANOMET?” cores[J].Aip Advances,2016,6(5):2410.
13 Rudnev V. Handbook of induction heating[J].Pediatric Neurosurgery,2002,7(1):15.
14 Tian Jianjun, Cui Jianmin, Yuan Yong,et al. Review of insulated iron powder based soft magnetic composite materials[J].Metallic Functional Materials,2010,17(4):50(in Chinese).
田建军,崔建民,袁勇,等.绝缘铁粉基软磁复合材料的研究进展[J].金属功能材料,2010,17(4):50.
15 GKN Sinter Metals develops motor using SMC materials[J].Metal Powder Report,2013,68(4):45.
16 Oikonomou C, Nikas D, Hryha E, et al. Evaluation of the thickness and roughness of homogeneous surface layers on spherical and irre-gular powder particles[J].Surface and Interface Analysis,2014,46(10-11):1028.
17 Zhao G, Wu C, Yan M. Enhanced magnetic properties of Fe soft magnetic composites by surface oxidation[J].Journal of Magnetism And Magnetic Materials,2016,399:51.
18 Peng Y, Nie J, Zhang W, et al. Effect of the addition of Al2O3 nanoparticles on the magnetic properties of Fe soft magnetic composites[J].Journal of Magnetism & Magnetic Materials,2016,399:88.
19 Yaghtin M, Taghvaei A H, Hashemi B, et al. Effect of heat treatment on magnetic properties of iron-based soft magnetic composites with Al2O3 insulation coating produced by sol-gel method[J].Journal of Alloys & Compounds,2013,58(51):293.
20Wu S, Sun A, Xu W, et al. Iron-based soft magnetic composites with Mn-Zn ferrite nanoparticles coating obtained by sol-gel method[J].Journal of Magnetism & Magnetic Materials,2012,324(22):3899.
21Taghvaei A H, Ebrahimi A, Ghaffari M, et al. Magnetic properties of iron-based soft magnetic composites with MgO coating obtained by sol-gel method[J].Journal of Magnetism & Magnetic Materials,2010,322(7):808.
22Wu S, Sun A, Lu Z, et al. Magnetic properties of iron-based soft magnetic composites with SiO2 coating obtained by reverse microemulsion method[J].Journal of Magnetism & Magnetic Materials,2015,381:451.
23 Malik M A, Wani M Y, Hashim M A. Microemulsion method: A novel route to synthesize organic and inorganic nanomaterials : 1st Nano Update[J].Arabian Journal of Chemistry,2012,5(4):397.
24 Sunday K J, Darling K A, Hanejko F G, et al. Al2O3 “self-coated” iron powder composites via mechanical milling[J].Journal of Alloys & Compounds,2015,653:61.
25 Taghvaei A H, Shokrollahi H, Ghaffari M, et al. Influence of particle size and compaction pressure on the magnetic properties of iron-phenolic soft magnetic composites[J].Journal of Physics & Chemistry of Solids,2010,71(1):7.
26 宛德福,马兴隆.磁性物理学[M].成都:电子科技大学出版社,1999:416.
27 Narasimhan K, Hanejko F, Marucci M L. ChemInform abstract: Growth opportunities with soft magnetic materials[J].Cheminform,2008,41:9.
28 Liu Y P, He S J, Bao D X, et al. Developing tendency of soft magnetic materials[J].Journal of Magnetic Materials and Devices,2003(3):26(in Chinese).
刘亚丕,何时金,包大新,等.软磁材料的发展趋势[J].磁性材料及器件,2003(3):26.
29 才鸿年,马建平.热处理手册.第1卷,工艺基础[M].第4版.北京:化学工业出版社,2010:693.
30Anhalt M. Systematic investigation of particle size dependence of magnetic properties in soft magnetic composites[J].Journal of Magnetism & Magnetic Materials,2008,320(14):e366.
31Verduzco J A, Betancourt I,Ortiz N, et al. Electric and magnetic properties of Fe-Ni powders-polymeric matrix composites[J].Materials Letter,2006,60(1):2033.
32Dias M M, Mozetic H J, Barboza J S, et al. Influence of resin type and content on electrical and magnetic properties of soft magnetic composites (SMCs)[J].Powder Technology,2013,237(3):213.
33 Nowosielski R, Wyslocki J J, Wnuk I, et al. Nanocrystalline soft magnetic composite cores[J].Journal of Materials Processing Technology,2006,175:324.
34 Kollár P, Kováô J, Füzer J, et al. The structure and magnetic pro-perties of a powder FeCuNbSiB material[J].Journal of Magnetism and Magnetic Materials,2000,215-216:560.
35 Yuan W J, Pang S J, Liu F J, et al. Frequency and magnetic field dependences of coercivity and core loss in Fe-Mo-Si-P-C-B amorphous alloys[J].Journal of Alloys & Compounds,2010,504(15):S142.
36 Wu C, Chen H, Lv H, et al. Interplay of crystallization, stress relaxation and magnetic properties for FeCuNbSiB soft magnetic composites[J].Journal of Alloys & Compounds,2016,673:278.
37 Bahrami A H, Ghayour H, Sharafi S. Evolution of microstructural and magnetic properties of mechanically alloyed Fe80-xNi20Six nanostructured powders[J].Powder Technology,2013,249:7.
38 Taghvaei A H, Ebrahimi A, Ghaffari M, et al. Retraction notice to “Magnetic properties of iron-based soft magnetic composites with MgO coating obtained by sol-gel method”[J].Journal of Magnetism & Magnetic Materials,2012,324(19):3227.
39 Suryanarayana C, Koch C C. Nanocrystalline materials—Current research and future directions[J].Hyperfine Interactions,2000,130(1):5.
40Taghvaei A H, Shokrollahi H, Janghorban K, et al. Eddy current and total power loss separation in the iron-phosphate-polyepoxy soft magnetic composites[J].Materials & Design,2009,30(10):3989.
41Lemieux P, Guthrie R, Isac M. Optimizing soft magnetic composites for power frequency applications and power-trains[J].JOM,2012,64(3):374.
42Ren L, Zhao J, Wang S J, et al. Dielectric and magnetic properties of Fe@FexOy/epoxy resin nanocomposites as high-performance electromagnetic insulating materials[J].Composites Science & Technology,2015,114(55):57.
43 Wang M, Zan Z, Deng N, et al. Preparation of pure iron/Ni-Zn ferrite high strength soft magnetic composite by spark plasma sintering[J].Journal of Magnetism and Magnetic Materials,2014,361:166.
44 Zhao G, Wu C, Yan M. Evolution of the insulation matrix and influe-nces on the magnetic performance of Fe soft magnetic composites during annealing[J].Journal of Alloys & Compounds,2016,685:231.
[1] 王晋枝,姜淑文,朱小鹏. 添加WS2/MoS2固体润滑剂的自润滑复合涂层研究进展[J]. 材料导报, 2019, 33(17): 2868-2872.
[2] 魏波,周金堂,姚正军,钱逸,钱崑. 环氧树脂基体的原位增韧技术研究进展[J]. 材料导报, 2019, 33(17): 2976-2988.
[3] 樊凯,卢雪峰,吕凯明,钱坤. C/C复合材料孔隙结构的研究进展[J]. 材料导报, 2019, 33(13): 2184-2190.
[4] 丁晓飞, 范同祥. 石墨烯增强铜基复合材料的研究进展[J]. 材料导报, 2019, 33(z1): 67-73.
[5] 张谦. 不同铺层角含孔复合材料板拉伸性能数值模拟[J]. 材料导报, 2019, 33(z1): 145-148.
[6] 冉涛, 张骞, 黎邦鑫, 刘旸, 李筠连. g-C3N4/泡沫镍整体式光催化剂的构建及光氧化去除NO[J]. 材料导报, 2019, 33(z1): 337-342.
[7] 崔海坡, 张伟东, 宋成利, 王成勇, 张涛, 张春晓, 程千莉. 微创血管夹不同齿型对血管力学性能的影响[J]. 材料导报, 2019, 33(z1): 432-435.
[8] 郭建业, 赵英民, 张丽娟, 苏力军, 李文静, 杨洁颖. 高温可重复使用二氧化硅气凝胶复合材料性能研究[J]. 材料导报, 2019, 33(z1): 202-205.
[9] 李茂源, 卢林, 戴珍, 洪义强, 陈为为, 张玉平, 乔英杰. 玻璃微珠和ZrB2改性石英酚醛复合材料的耐烧蚀性能[J]. 材料导报, 2019, 33(8): 1302-1306.
[10] 王应武, 左孝青, 冉松江, 孔德昊. TiB2含量及T6热处理对原位TiB2/ZL111复合材料显微组织和硬度的影响[J]. 材料导报, 2019, 33(8): 1371-1375.
[11] 郑云武, 陶磊, 康佳, 黄元波, 刘灿, 郑志锋. 不同原料烘焙炭的理化特性及对亚甲基蓝的吸附性能[J]. 材料导报, 2019, 33(8): 1276-1284.
[12] 韩银娜, 张小军, 李龙, 周德敬. 铝基层状复合材料界面金属间化合物的研究现状[J]. 材料导报, 2019, 33(7): 1198-1205.
[13] 赵媛媛, 王德军, 赵朝成. 电催化氧化处理难降解废水用电极材料的研究进展[J]. 材料导报, 2019, 33(7): 1125-1132.
[14] 司雯, 曹明莉, 冯嘉琪. 纤维增强水泥基复合材料的流动性与流变性研究进展[J]. 材料导报, 2019, 33(5): 819-825.
[15] 郭帅, 焦学健, 李丽君, 董抒华, 孙丰山, 单海瑞. 近场动力学方法研究复合材料失效的进展[J]. 材料导报, 2019, 33(5): 826-833.
[1] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[2] Huimin PAN,Jun FU,Qingxin ZHAO. Sulfate Attack Resistance of Concrete Subjected to Disturbance in Hardening Stage[J]. Materials Reports, 2018, 32(2): 282 -287 .
[3] Siyuan ZHOU,Jianfeng JIN,Lu WANG,Jingyi CAO,Peijun YANG. Multiscale Simulation of Geometric Effect on Onset Plasticity of Nano-scale Asperities[J]. Materials Reports, 2018, 32(2): 316 -321 .
[4] Xu LI,Ziru WANG,Li YANG,Zhendong ZHANG,Youting ZHANG,Yifan DU. Synthesis and Performance of Magnetic Oil Absorption Material with Rice Chaff Support[J]. Materials Reports, 2018, 32(2): 219 -222 .
[5] Ninghui LIANG,Peng YANG,Xinrong LIU,Yang ZHONG,Zheqi GUO. A Study on Dynamic Compressive Mechanical Properties of Multi-size Polypropylene Fiber Concrete Under High Strain Rate[J]. Materials Reports, 2018, 32(2): 288 -294 .
[6] XU Zhichao, FENG Zhongxue, SHI Qingnan, YANG Yingxiang, WANG Xiaoqi, QI Huarong. Microstructure of the LPSO Phase in Mg98.5Zn0.5Y1 Alloy Prepared by Directional Solidification and Its Effect on Electromagnetic Shielding Performance[J]. Materials Reports, 2018, 32(6): 865 -869 .
[7] ZHOU Rui, LI Lulu, XIE Dong, ZHANG Jianguo, WU Mengli. A Determining Method of Constitutive Parameters for Metal Powder Compaction Based on Modified Drucker-Prager Cap Model[J]. Materials Reports, 2018, 32(6): 1020 -1025 .
[8] WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing[J]. Materials Reports, 2017, 31(1): 64 -71 .
[9] HUANG Dajian, MA Zonghong, MA Chenyang, WANG Xinwei. Preparation and Properties of Gelatin/Chitosan Composite Films Enhanced by Chitin Nanofiber[J]. Materials Reports, 2017, 31(8): 21 -24 .
[10] YUAN Xinjian, LI Ci, WANG Haodong, LIANG Xuebo, ZENG Dingding, XIE Chaojie. Effects of Micro-alloying of Chromium and Vanadium on Microstructure and Mechanical Properties of High Carbon Steel[J]. Materials Reports, 2017, 31(8): 76 -81 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed