Please wait a minute...
材料导报  2018, Vol. 32 Issue (24): 4319-4323    https://doi.org/10.11896/j.issn.1005-023X.2018.24.020
  金属与金属基复合材料 |
不同材料对双极高频电刀温度场的影响
黄嘉平, 崔海坡, 宋成利, 周宇
上海理工大学现代微创医疗器械及技术教育部工程研究中心,上海 200093
Influence of Different Materials on the Temperature Field of Bipolar High-frequency Electric Knife
HUANG Jiaping, CUI Haipo, SONG Chengli, ZHOU Yu
Shanghai Institute for Minimally Invasive Therapy, University of Shanghai for Science and Technology, Shanghai 200093
下载:  全 文 ( PDF ) ( 1683KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 基于有限元分析软件ANSYS,对双极高频电刀工作过程中的温度场进行了详细的电热耦合仿真分析,研究了四种不同绝缘层材料和四种不同电极材料对双极高频电刀温度场的影响规律。结果表明,对于304不锈钢、316不锈钢、317不锈钢和Ti6Al4V这四种材料而言,选取Ti6Al4V作为电极制作材料时,通电后电极产生的温度最高;在连续通电2 s的时间内,当电极材料为Ti6Al4V时,绝缘层的温度接近其制作材料的热变形温度,从而易导致绝缘层发生软化,影响电刀的正常使用性能;对于PA6、PC、PP以及ABS这四种材料而言,后两种材料更适宜作为高频电刀绝缘层的制作材料;高频电刀连续通电时间不宜超过2 s,否则会对电极周围的正常人体组织造成电灼伤。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
黄嘉平
崔海坡
宋成利
周宇
关键词:  高频电刀  电热耦合  绝缘层材料  电极材料    
Abstract: Based on the ANSYS software, the electric-thermal coupling simulation analysis was performed for the temperature field during the bipolar high-frequency electric knife being work. The influence of 4 different insulating layer materials and 4 different electrode materials on the temperature field of bipolar high-frequency electric knife was researched. The results indicated that, for the 304 stainless steel, 316 stainless steel, 317 stainless steel and Ti6Al4V, the electrode temperature is highest for choosing Ti6Al4V being the electrode material. And in 2 s for continuous power, the temperature of the insulating layer is close to the thermal deformation temperature of the insulating material, which leads to the softening of the insulating layer and affects the normal service performance of the electric knife. For the PA6, PC, PP and ABS, the latter two materials are more suitable for the manufacture of insulating layer of high-frequency electrical knife. The continuous power time for the high-frequency electric knife should not exceed 2 s, otherwise it will cause electrical burns to normal human tissue around the electrode.
Key words:  high-frequency electric knife    electric-thermal coupling    insulating layer material    electrode material
                    发布日期:  2019-01-23
ZTFLH:  TB333  
基金资助: 国家自然科学基金(51377024;51735003)
通讯作者:  崔海坡:通信作者,男,1978年生,博士,副教授,主要研究方向为材料的设计、分析与应用 E-mail:h_b_cui@163.com   
作者简介:  黄嘉平:男,1994年生,硕士研究生,主要研究方向为高频电刀的设计 E-mail:1071554196@qq.com
引用本文:    
黄嘉平, 崔海坡, 宋成利, 周宇. 不同材料对双极高频电刀温度场的影响[J]. 材料导报, 2018, 32(24): 4319-4323.
HUANG Jiaping, CUI Haipo, SONG Chengli, ZHOU Yu. Influence of Different Materials on the Temperature Field of Bipolar High-frequency Electric Knife. Materials Reports, 2018, 32(24): 4319-4323.
链接本文:  
http://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2018.24.020  或          http://www.mater-rep.com/CN/Y2018/V32/I24/4319
1 Pérez J J, D’Avila A, Aryana A, et al. Electrical and thermal effects of esophageal temperature probes on radiofrequency catheter ablation of atrial fibrillation: Results from a computational modeling study[J].Materials Science in Semiconductor Processing,2015,40(5):708.
2 Massarweh N N, Cosgriff N, Slakey D P. Electrosurgery: History, principles, and current and future uses[J].Journal of the American College of Surgeons,2006,202(3):520.
3 Duan Yahui. Development of intelligent high-frequency scalpel electric knife[D]. Hefei:University of Science and Technology of China,2009(in Chinese).
段亚辉.智能高频手术刀电刀研制[D].合肥:中国科学技术大学.2009.
4 Boyd D E, Palmer J H M. Surgical diathermy[J].Anaesthesia & Intensive Care Medicine,2013,14(10):431.
5 Wang K, Advincula A P. "Current thoughts" in electrosurgery[J].International Journal of Gynecology & Obstetrics,2007,97(3):245.
6 Gallagher K, Dhinsa B, Miles J. Electrosurgery[J].Surgery,2011,29(2):70.
7 Yang Sha, Pan Jipeng, Zhang Leiting. Problems in high frequency electric knife calibration and their solutions[J].Chinese Medical Equipment,2017,14(3):155(in Chinese).
杨莎,潘继鹏,张雷廷.高频电刀校准中的问题及解决方法[J].中国医学装备,2017,14(3):155.
8 Lu Jian, Xian Qinglong. Evaluation of uncertainty of measured value of high-frequency electric output[J].Measurement and Testing Techniques,2017(4):73(in Chinese).
鹿剑,鲜青龙.高频电刀输出功率的测量值的不确定度评定[J].计量与测试技术,2017(4):73.
9 Su Jingchang, Su Junchang, Wang Li. Analysis of key factors in quality control and application safety of high frequency electric[J].Chinese Medical Device Information,2016,22(10):113(in Chinese).
苏京昌,苏军昌,王丽.高频电刀质量控制及应用安全的关键因素分析[J].中国医疗器械信息,2016,22(10):113.
10 Liu Yaxin, Zhang Xing. The damage characteristics high-frequency electric knife on tonsil tissue thermal[J].Chinese Community Doctors,2014,30(20):66(in Chinese).
刘亚昕,张幸.高频电刀对扁桃体组织热损伤的特点分析[J].中国社区医师,2014,30(20):66.
11 Zhao X X, Pan Y L, Din H, et al. The influence of gold nanoparticles on Sil-2R and TGF-β of hepatocellular carcinoma bearing mice before and after the electric knife treatment[J].Nanomedicine,2016,12(2):564.
12 Kawakami T. Clinical application of a high frequency electric knife with coblation technology for temporomandibular joint arthroscopic surgery[J].Journal of Oral and Maxillofacial Surgery,2014,72(9):220.
13 Kristin D, Gary M, Jeffrey R, et al. Vessel sealing instrument with electrical cutting mechanism:US,8,333,765 B2[P].2012-12-18.
14 Campbell P A, Cresswell A B, Song C, et al. Real-time thermography during energized vessel sealing and dissection[J].Surgical Endoscopy,2003,17(10):1640.
15 杨鸣波,唐志玉.高分子材料手册[M].北京:化学工业出版社,2009.
16 Song C, Tang B, Campbell P A, et al. Thermal spread and heat absorbance differences between open and laparoscopic surgeries during energized dissections by electrosurgical instruments[J].Surgical Endoscopy,2009,23(11):2480.
[1] 张传涛, 邢宝林, 黄光许, 张双杰, 张传祥, 史长亮, 朱阿辉, 姚友恒, 张青山. 水热炭化-KOH活化制备核桃壳活性炭电极材料的研究[J]. 《材料导报》期刊社, 2018, 32(7): 1088-1093.
[2] 王赫, 王洪杰, 王闻宇, 金欣, 林童. 聚丙烯腈基碳纳米纤维在超级电容器电极材料中的应用研究进展[J]. 《材料导报》期刊社, 2018, 32(5): 730-734.
[3] 吴亚鸽, 冉奋. 纤维素基多孔碳膜的制备及其电化学性能研究[J]. 《材料导报》期刊社, 2018, 32(5): 715-718.
[4] 苏婷, 宋永辉, 张珊, 田宇红, 兰新哲. 硝酸活化时间对煤基电极材料结构及性能的影响[J]. 《材料导报》期刊社, 2018, 32(4): 528-532.
[5] 张苗苗,刘旭燕,钱炜. 聚吡咯电极材料在超级电容器中的研究进展[J]. 《材料导报》期刊社, 2018, 32(3): 378-383.
[6] 何云龙, 沈沪江, 王炜, 袁慧慧. 柔性染料敏化太阳能电池和柔性钙钛矿太阳能电池关键电极材料研究进展[J]. 材料导报, 2018, 32(21): 3677-3688.
[7] 史长亮, 邢宝林, 曾会会, 张双杰, 郭晖, 贾建波, 张传祥, 田野, 朱阿辉, 张青山. 梯级孔生物质活性炭的制备及其电容特性研究[J]. 材料导报, 2018, 32(19): 3318-3324.
[8] 谭永涛, 孔令斌, 康龙, 冉奋. Nano-Au@PANI蛋黄空心结构电极材料的构筑及超级电容性能[J]. 《材料导报》期刊社, 2018, 32(1): 47-50.
[9] 梁兴, 高国华, 吴广明. 氧化钒作锂离子电池正极材料的研究进展[J]. 《材料导报》期刊社, 2018, 32(1): 12-33.
[10] 张亚婷, 任绍昭, 党永强, 刘国阳, 李可可, 周安宁, 邱介山. 煤基三维石墨烯基电极在不同电解液中的电化学性能*[J]. 《材料导报》期刊社, 2017, 31(16): 1-5.
[11] 余剑武, 胡其丰, 段文, 何利华, 沈湘. 电加工8418钢的能量分配与表面粗糙度模型*[J]. 《材料导报》期刊社, 2017, 31(14): 153-157.
[12] 何博, 潘宇飞, 陆敏. 石墨烯基储能材料的增材制造研究进展[J]. 《材料导报》期刊社, 2017, 31(13): 126-130.
[1] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[2] Huimin PAN,Jun FU,Qingxin ZHAO. Sulfate Attack Resistance of Concrete Subjected to Disturbance in Hardening Stage[J]. Materials Reports, 2018, 32(2): 282 -287 .
[3] Siyuan ZHOU,Jianfeng JIN,Lu WANG,Jingyi CAO,Peijun YANG. Multiscale Simulation of Geometric Effect on Onset Plasticity of Nano-scale Asperities[J]. Materials Reports, 2018, 32(2): 316 -321 .
[4] Xu LI,Ziru WANG,Li YANG,Zhendong ZHANG,Youting ZHANG,Yifan DU. Synthesis and Performance of Magnetic Oil Absorption Material with Rice Chaff Support[J]. Materials Reports, 2018, 32(2): 219 -222 .
[5] Ninghui LIANG,Peng YANG,Xinrong LIU,Yang ZHONG,Zheqi GUO. A Study on Dynamic Compressive Mechanical Properties of Multi-size Polypropylene Fiber Concrete Under High Strain Rate[J]. Materials Reports, 2018, 32(2): 288 -294 .
[6] XU Zhichao, FENG Zhongxue, SHI Qingnan, YANG Yingxiang, WANG Xiaoqi, QI Huarong. Microstructure of the LPSO Phase in Mg98.5Zn0.5Y1 Alloy Prepared by Directional Solidification and Its Effect on Electromagnetic Shielding Performance[J]. Materials Reports, 2018, 32(6): 865 -869 .
[7] ZHOU Rui, LI Lulu, XIE Dong, ZHANG Jianguo, WU Mengli. A Determining Method of Constitutive Parameters for Metal Powder Compaction Based on Modified Drucker-Prager Cap Model[J]. Materials Reports, 2018, 32(6): 1020 -1025 .
[8] WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing[J]. Materials Reports, 2017, 31(1): 64 -71 .
[9] HUANG Dajian, MA Zonghong, MA Chenyang, WANG Xinwei. Preparation and Properties of Gelatin/Chitosan Composite Films Enhanced by Chitin Nanofiber[J]. Materials Reports, 2017, 31(8): 21 -24 .
[10] YUAN Xinjian, LI Ci, WANG Haodong, LIANG Xuebo, ZENG Dingding, XIE Chaojie. Effects of Micro-alloying of Chromium and Vanadium on Microstructure and Mechanical Properties of High Carbon Steel[J]. Materials Reports, 2017, 31(8): 76 -81 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed