Please wait a minute...
《材料导报》期刊社  2017, Vol. 31 Issue (24): 74-78    https://doi.org/10.11896/j.issn.1005-023X.2017.024.015
  第一届先进胶凝材料研究与应用学术会议 |
水溶性单体对聚合物乳液在水泥浆体中稳定性的影响
韩冬冬1,陈维灯1,2,钟世云1
1 同济大学先进土木工程材料教育部重点实验室,上海 201804;
2 福建省建筑科学研究院,福州 350025
Making Latex Suitable for the Modification of Cement Paste by Selecting Water-soluble Monomer
HAN Dongdong1, CHEN Weideng1,2, ZHONG Shiyun1
1 Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, Tongji University, Shanghai 201804;
2 Fujian Academy of Building Research, Fuzhou 350025
下载:  全 文 ( PDF ) ( 1505KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 以水泥浆的流动性和筛上残余率为评价指标研究了水溶性单体丙烯酸(AA)、N-羟甲基丙烯酰胺(NMA)、甲基丙烯酸羟乙酯(HEMA)单独使用或组合使用对聚合物乳液在水泥浆中稳定性的影响,并对其影响机制进行探讨。结果表明,不管水溶性单体是单独使用还是组合使用,随其总含量(0%~4%)的增加,聚合物乳液在水泥浆中的稳定性增加。在相同含量时,不同结构的水溶性单体对聚合物乳液在水泥浆中稳定性的贡献大小为NMA>AA>HEMA,与它们的无机性值/有机性值的比值有着很好的一致性。水溶性单体的含量和种类决定着聚合物乳液的钙离子临界凝聚浓度(CCC),聚合物乳液的CCC值越高,其在水泥浆中稳定性越好。水溶性单体越倾向于分布在乳胶粒表面,越有利于聚合物乳液的稳定。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
韩冬冬
陈维灯
钟世云
关键词:  聚合物乳液  水溶性单体  稳定性  水泥浆    
Abstract: Three water-soluble monomers with different molecular structures were selected to prepare the styrene-acrylate latex used for the modification of cement-based materials. The flowability test and the residue on sieve test of cement paste were applied to evaluate the stability of latex in cement paste. Results show that the stability of latex in cement paste increases with the increase of water-soluble monomer content (0%—4%). At the same content of water-soluble monomer, the latex containing N-methylol acrylamide (NMA) has the best stability when mixed with cement, followed by the latex containing acrylic acid (AA), then the latex containing hydroxyethyl methacrylate (HEMA). Which shows a good accordance with the inorganic value/organic value (I/O) of water-soluble monomer (I/O: NMA>AA>HEMA). It is also found that the content and structure of water-soluble monomer determine the critical coagulation concentration (CCC) of latex, and the higher CCC leads to the better stability of latex in cement paste. The greater the tendency of water-soluble monomer distributed on the surface of polymer particles contributes to the better stability of latex.
Key words:  latex    water-soluble monomer    stability    cement paste
               出版日期:  2017-12-25      发布日期:  2018-05-08
ZTFLH:  TQ172.79  
通讯作者:  钟世云:男,1961年生,博士,教授,博士研究生导师,研究方向为聚合物改性水泥基材料、固体废弃物综合利用等 E-mail:syzhong@tongji.edu.cn   
作者简介:  韩冬冬:女,1988年生,博士研究生,研究方向为聚合物改性水泥基材料 E-mail:hdd880216@163.com
引用本文:    
韩冬冬,陈维灯,钟世云. 水溶性单体对聚合物乳液在水泥浆体中稳定性的影响[J]. 《材料导报》期刊社, 2017, 31(24): 74-78.
HAN Dongdong, CHEN Weideng, ZHONG Shiyun. Making Latex Suitable for the Modification of Cement Paste by Selecting Water-soluble Monomer. Materials Reports, 2017, 31(24): 74-78.
链接本文:  
http://www.mater-rep.com/CN/10.11896/j.issn.1005-023X.2017.024.015  或          http://www.mater-rep.com/CN/Y2017/V31/I24/74
1 Jenni A, Holzer L, Zurbriggen R, et al. Influence of polymers on microstructure and adhesive strength of cementitious tile adhesive mortars[J]. Cem Concr Res, 2005,35(1):35.
2 Medeiros M H F, Helene P, Selmo S. Influence of EVA and acrylate polymers on some mechanical properties of cementitious repair mortars[J]. Constr Build Mater, 2009,23(7):2527.
3 Zhao F Q, Li H, Liu S J, et al. Preparation and properties of an environment friendly polymer-modified waterproof mortar[J]. Constr Build Mater, 2011,25(5):2635.
4 Fowler D W. Application of PC and PMC in industry and industrial environment[J]. Adv Mater Res, 2013,687:21.
5 ACI 548.3R-9. Report of polymer-modified concrete[R]. Detroit: American Concrete Institute, 2009:4.
6 Fowler D W. Polymers in concrete: A vision for the 21st century[J]. Cem Concr Compos, 1999,21(5):449.
7 Zhao W J, Zhang Y, Zhao Y Z, et al. Effects of twain-20 on performance of PB-g-PSG latex modified cement mortar and its mechanism of action[J]. J Build Mater, 2014,17(4):566(in Chinese).
赵文杰, 张羽, 赵彦芝,等. 吐温-20对PB-g-PSG胶乳改性水泥砂浆性能影响及作用机理[J]. 建筑材料学报, 2014,17(4):566.8 Chen D J, Li J, Zhang Y. Study on effect of emulsifiers to stability of latex cement system[J]. Drilling Fluid Completion Fluid, 2011,28(5):60(in Chinese).
陈大钧, 李竞, 张颖. 乳化剂对胶乳水泥体系性能的影响[J]. 钻井液与完井液, 2011,28(5):60.
9 Cai Y, Wang P M, Zhong S Y. Influence of coagulation of polymer dispersion on the properties of polymer-modified mortar[J]. Adv Mater Res, 2015,1129:162.
10Merlin F, Guitouni H, Mouhoubi H, et al. Adsorption and heterocoagulation of nonionic surfactants and latex particles on cement hydrates[J]. J Colloid Interface Sci, 2005,281(1):1.
11Yu Z Q, Li B G, Chen H Q, et al. Stability of polymer emulsion[J]. Paint Coat Ind, 1998(11):41(in Chinese).
余樟清, 李伯耿, 陈焕钦,等. 聚合物乳液的稳定性[J]. 涂料工业, 1998(11):41.
12Wang J G, Wang C L, Wu B, et al. Modification of cement mortar by using vinylacetic acid-sodium acrylate anion emulsifier-free latex[J]. J Chin Ceram Soc, 2004,32(1):29(in Chinese).
王金刚, 王成林, 吴波, 等. 醋酸乙烯阴离子型无皂乳液改性水泥砂浆性能的研究[J]. 硅酸盐学报, 2004,32(1):29.
13Wu G F, Tao Y, Yang C, et al. Effect of the content of acrylic acid (AA) on the stability of polyacrylate latex[J]. Chin J Colloid Polym, 2008,26(2):7(in Chinese).
吴广峰, 陶悦, 杨超,等. AA含量对聚丙烯酸酯乳液稳定性的影响[J]. 胶体与聚合物, 2008,26(2):7.
14钟世云, 袁华. 聚合物在混凝土中的应用[M]. 北京: 化学工业出版社, 2003:111.
15Wang F, Liu Y, Hu S. Effect of early cement hydration on the chemical stability of asphalt emulsion[J]. Const Build Mater, 2013,42(9):146.
16Plank J, Gretz M. Study on the interaction between anionic and ca-tionic latex particles and Portland cement[J]. Colloids Surf A: Phy-sicochem Eng Aspects, 2008,330(2):227.
17曹同玉, 刘庆普, 胡今生. 聚合物乳液合成原理性能及应用[M]. 北京: 化学工业出版社, 2007:607.
18魏斌. 有机概念图及其应用[M]. 北京:轻工业出版社, 1988:17.
19Tripathi A K, Tsavalas J G, Sundberg D C. Partitioning of functional monomers in emulsion polymerization: Distribution of carboxylic acid and hydroxy (meth) acrylate monomers between water and polymers[J]. Ind Eng Chem Res, 2014,53(16):6600
20Tripathi A K, Sundberg D C. Partitioning of functional monomers in emulsion polymerization: Distribution of carboxylic acid monomers between water and monomer phases[J]. Ind Eng Chem Res, 2013,52(9):3306.
[1] 张笑, 宋武林, 卢照, 曾大文, 谢长生. 纳米二氧化钛分散液稳定性的研究进展[J]. 材料导报, 2019, 33(z1): 16-21.
[2] 王宏, 李方, 张十庆, 何钦生, 张登友, 邹兴政, 赵安中, 谭军. 核场测温用热电偶合金材料的研究[J]. 材料导报, 2019, 33(z1): 398-402.
[3] 胡建伟, 谢永江, 刘子科, 翁智财, 王月华, 何龙. 两阶段变速搅拌对高强混凝土稳定性的影响[J]. 材料导报, 2019, 33(z1): 229-233.
[4] 莫松平, 郑麟, 袁潇, 林潇晖, 潘婷, 贾莉斯, 陈颖, 成正东. 具有高分散稳定性的磷酸锆悬浮液的液固相变循环性能[J]. 材料导报, 2019, 33(6): 919-922.
[5] 周宇飞, 袁一鸣, 仇中柱, 乐平, 李芃, 姜未汀, 郑莆燕, 张涛, 李春莹. 纳米铝和石墨烯量子点改性的相变微胶囊的制备及特性[J]. 材料导报, 2019, 33(6): 932-935.
[6] 谢鹏飞, 陈勰, 丁峰, 张乃文, 李建波, 任杰. 缩聚法制备热固性聚乳酸及其力学性能和热稳定性研究[J]. 材料导报, 2019, 33(6): 1042-1046.
[7] 张寒松, 胡志德, 晏华, 薛明, 贾艺凡. 纳米SiO2/黄原胶复合触变剂对磁流变液性能的影响[J]. 材料导报, 2019, 33(6): 1052-1056.
[8] 王恩胜, 余丽萍, 廉世勋, 周文理. 全无机钙钛矿量子点的研究进展[J]. 材料导报, 2019, 33(5): 777-783.
[9] 王子博, 刘满平, 姜奎, 秦希, 章勇, 王圣楠, 陈健. 退火时间对高压扭转Al-1.0Mg铝合金组织及性能的影响[J]. 材料导报, 2019, 33(2): 321-324.
[10] 钟晓聪, 陈芳会, 王瑞祥, 徐志峰. 硫酸体系铅基阳极稳定性研究进展[J]. 材料导报, 2019, 33(17): 2862-2867.
[11] 仇磊, 陈鼎, 朱莉莉, 陈耀彤, 王思远, 冯鹏飞. 氧化石墨烯作为润滑油添加剂的分散稳定性[J]. 材料导报, 2019, 33(16): 2638-2643.
[12] 卫芳彬, 张雷阳, 王颖, 李洋, 刘岗. 二氧化铈掺杂钛酸铋钠基陶瓷的高储能密度及温度稳定性[J]. 材料导报, 2019, 33(16): 2648-2653.
[13] 尹华伟, 李明伟, 周川, 胡志涛. ADP晶体生长过程中的运动方式对晶体性能的影响[J]. 材料导报, 2019, 33(16): 2660-2664.
[14] 常悦, 陈支泽, 杨一奇. 聚乳酸-聚己内酯多嵌段立构复合物薄膜的制备及熔融稳定性[J]. 材料导报, 2019, 33(16): 2808-2812.
[15] 陈超, 孙振平. 硅灰对掺有无碱速凝剂水泥浆体性能的影响[J]. 材料导报, 2019, 33(14): 2348-2353.
[1] Bingwei LUO,Dabo LIU,Fei LUO,Ye TIAN,Dongsheng CHEN,Haitao ZHOU. Research on the Two Typical Infrared Detection Materials Serving at Low Temperatures: a Review[J]. Materials Reports, 2018, 32(3): 398 -404 .
[2] Huimin PAN,Jun FU,Qingxin ZHAO. Sulfate Attack Resistance of Concrete Subjected to Disturbance in Hardening Stage[J]. Materials Reports, 2018, 32(2): 282 -287 .
[3] Siyuan ZHOU,Jianfeng JIN,Lu WANG,Jingyi CAO,Peijun YANG. Multiscale Simulation of Geometric Effect on Onset Plasticity of Nano-scale Asperities[J]. Materials Reports, 2018, 32(2): 316 -321 .
[4] Xu LI,Ziru WANG,Li YANG,Zhendong ZHANG,Youting ZHANG,Yifan DU. Synthesis and Performance of Magnetic Oil Absorption Material with Rice Chaff Support[J]. Materials Reports, 2018, 32(2): 219 -222 .
[5] Ninghui LIANG,Peng YANG,Xinrong LIU,Yang ZHONG,Zheqi GUO. A Study on Dynamic Compressive Mechanical Properties of Multi-size Polypropylene Fiber Concrete Under High Strain Rate[J]. Materials Reports, 2018, 32(2): 288 -294 .
[6] XU Zhichao, FENG Zhongxue, SHI Qingnan, YANG Yingxiang, WANG Xiaoqi, QI Huarong. Microstructure of the LPSO Phase in Mg98.5Zn0.5Y1 Alloy Prepared by Directional Solidification and Its Effect on Electromagnetic Shielding Performance[J]. Materials Reports, 2018, 32(6): 865 -869 .
[7] ZHOU Rui, LI Lulu, XIE Dong, ZHANG Jianguo, WU Mengli. A Determining Method of Constitutive Parameters for Metal Powder Compaction Based on Modified Drucker-Prager Cap Model[J]. Materials Reports, 2018, 32(6): 1020 -1025 .
[8] WANG Tong, BAO Yan. Advances on Functional Polyacrylate/Inorganic Nanocomposite Latex for Leather Finishing[J]. Materials Reports, 2017, 31(1): 64 -71 .
[9] HUANG Dajian, MA Zonghong, MA Chenyang, WANG Xinwei. Preparation and Properties of Gelatin/Chitosan Composite Films Enhanced by Chitin Nanofiber[J]. Materials Reports, 2017, 31(8): 21 -24 .
[10] YUAN Xinjian, LI Ci, WANG Haodong, LIANG Xuebo, ZENG Dingding, XIE Chaojie. Effects of Micro-alloying of Chromium and Vanadium on Microstructure and Mechanical Properties of High Carbon Steel[J]. Materials Reports, 2017, 31(8): 76 -81 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed